SPECIAL OFFERS: TV/SAT

• Supply voltage 24 V
• Number of inputs: 3
• Number of outputs: 1
• 20 dB of gain in the FM+VHF band and 32 dB gain in the UHF band
• 2 On/Off potentiometers that allow 24 VDC voltage and 50 mA current to be sent to antenna preamplifiers through each of the two UHF inputs
• Die-cast housing inside a compact plastic case

• Length: 1 m
• Cable diameter: 4 mm
• Plug width (max): 18 mm
• HDMI specification: v1.4
• Max. video resolution ///4096x2160///
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel

• Designed for all kinds of systems, particularly for terrestrial and satellite TV systems
• PVC sheath - inner cable
• Screening class: A
• Copper core 1,13 mm
• Aluminum braid 81%
• Double screen: foil/sheath
• CPR Class: Eca
• 500 meters

• Conforms to Class A+ standard
• Reaction to fire class in accordance with CPR - Dca-s2, d1, a1
• Made in LSZH jacket (LS0H) - halogen-free insulation
• Triple screen - first Al/PET/SY foil bonded to dielectric + 81% braid + second Al/PET foil bonded to jacket
• Conforms to IEC68-2 part 3 accelerated ageing standard
• Copper core 1.13 mm
• Low attenuation
• Excellent fit
• High screening efficiency - fulfils class A+++ requirement in most of the range
• 81% braid coverage
• 5 year warranty

• Designed for all types of systems, particularly for terrestrial and satellite TV systems
• PE-coated outdoor cable
• Resistant to UV radiation
• Gel that prevents the spread of moisture inside
• Screening class: A
• Copper core: 1,13 mm
• Aluminum braid 81%
• Double shield: foil/braid
• CPR Class: Fca
• 500 meters

• Complies with Class A++ standard
• Braid coverage 82% - tinned copper
• Interference attenuation 10 dB higher than Class A+
• Copper tinned braid resistant to oxidation
• Complies with requirements of MTBiGM regulation
• Copper core 1,05 mm
• Low attenuation
• High shielding effectiveness
• 82% braid coverage
• 10 year warranty
• SoH coated cable
• Fire response class in accordance with CPR - B2ca-s1a,d1,a1

• Frequency range 47-862 MHz
• Power supply via 5 V tuner
• External power supply 5-12 V
• Power consumption 25 mA
• Input connector "F"
• Output connector "F"
• Power connector 3.5 mm jack
• Range of measured levels 50-80 dB

• Measures DVB-T/T2/C and DVB-S2X/S2/S signals (fully compatible with MPEG-2/MPEG-4)
• Supports DVB-T2 with H.265/HEVC
• Views the received channel on LCD display
• Built-in video decoder: MPEG-2/H.264/H.265/HEVC 10 bit
• Percentage indication of signal strength and quality
• Measurement of all necessary signal parameters such as signal level expressed in dBμV, C/N, BER, MER
• Li-On 7.4 V/2600 mAh battery
• Possibility to edit satellite, transponder, frequency
• Supports DiSEqC: 1.0, 1.1, 0/22 kHz Tone, Unicable (dSCR), wideband
• USB connector (supported file format: wma,mp3,mp4,avi,jpg,jpeg,bmp,img)
• Satellite path short circuit protection (LNB)

• Measurement of DVB-T/T2/C/J.83B/ISDB-T and DVB-S/S2 signals
• DVB-T2 support with H.265/HEVC 10 bit
• Built-in video decoder: MPEG-2/H.264/HEVC(H.265) 4K
• Certified calibration
• Measurement of all necessary signal parameters such as signal level expressed in dBμV, CBER, VBER
• Measurement of necessary parameters for digital signal: MER, Link Margin
• Measurement of DVB-S/S2 signals simultaneously from two satellite positions for each of the 8 polarisation/band pairs
• Measurement export to .csv file
• RF signal measurement in the range 20...100 dBμV
• Real-time signal spectrum analyser to detect interference from LTE signals
• Menu in Polish, English, Italian, Spanish, Portuguese, Czech, German, Arabic
• USB interface (possibility of taking a screenshot of the current signal measurement)
• Viewing of the received channel on a 7" TFT-LCD touch-screen display with high 4K resolution
• DiSEqC support: 1.0, 1.1,1.2, 0/22 kHz Tone, Unicable (dSCR), Wideband
• Constellation chart
• Large Li-On 7.4 V/7000 mAh battery - sufficient for approx. 3-4 h of continuous operation
• Efficient and easy-to-use user interface

• Measures DVB-T/T2/C and DVB-S/S2 signals
• Supports DVB-T2 with H.265/HEVC 10 bit
• Views the received channel on the 7" LCD display
• Built-in video decoder: MPEG-2/H.264/H.265
• DiSEqC support: 1.0, 1.1,1.2, 0/22 kHz Tone, Unicable (dSCR), Wideband
• USB connector (possibility to take a screenshot of the current measurement)
• Signal strength and quality indication
• Optical power meter
• Measurement of all necessary signal parameters such as: Signal level expressed in dBμV, C/N, BER, MER
• Signal spectrum analyzer
• Constellation chart
• Satellite finding beeper (can be turned off)
• Car charger included
• Li-On 7.4 V/5000 mAh battery
• Editable satellite, transponder, frequency
• Short-circuit protection in satellite path (LNB)