This section includes devices and equipment intended for making installations in which the signal source is the terrestrial TV and DVB-T and satellite TV. The offered products include, among others: TV and radio antennas, satellite dishes, coaxial cables, amplifiers and multiswitches, which can be used for both, individual and SMATV systems in residential buildings, hotels, commercial buildings, etc.
Antenna installers will find professional DVB-T2 and DVB-S2 signal meters here. The distribution of DVB-T2 terrestrial and satellite television signals in hotels and commercial buildings requires dedicated headend panels and digital modulators. The offer also includes IPTV station panels.
The offer is complemented by devices for transmission of HDMI signals, connectors, splitters, antenna splitters, TV/SAT and multimedia connectors.
SD-510 taps with 10 dB attenuation are used in multiswitch installations. It is used to separate signals from the multiswitch bus.
• Dividing the multiswitch bus into 2 tracks
• High screening efficiency
• Replaces 5 single TV/SAT taps
• DC feed-through selectable
• 10 dB tapping attenuation
Code: R70516
€44.09
Available

The splitter is used in multiswitch systems to extend the signal bus consisting of four satellite lines (carrying signals from a Quatro LNB) and terrestrial line with DVB-T, DAB, FM signals.
• Sub-network partition (two branches)
• High screening efficiency
• Replaces 5 individual TV/SAT splitters
• Optionally switched-on DC transition
• Available optional tap versions with 10, 15, 20 dB attenuation
Code: R70515
€44.09
Available

SD-515 tap with 15 dB attenuation is used in multiswitch installations. It is used to separate signals from the multiswitch bus.
• Dividing the multiswitch bus into 2 tracks
• High screening efficiency
• Replaces 5 single TV/SAT taps
• DC feed-through selectable
• 15 dB tapping attenuation
Code: R70517
€45.88
Available

The SD-904 splitter is used in multiswitch installations to split the signal from the multiswitch bus into 2 subnetworks.
• 9-cable system (8x SAT + terrestrial TV/Radio)
• Divides the system into two subnetworks
• Replaces 9 individual TV/SAT splitters
• Equipped with switched-on/off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
Code: R70523
€78.70
Available

SD-520 tap with 20 dB attenuation is used in multiswitch installations. It is used to separate signals from the multiswitch bus.
• Dividing the multiswitch bus into 2 tracks
• High screening efficiency
• Replaces 5 single TV/SAT taps
• DC feed-through selectable
• 20 dB tapping attenuation
Code: R70518
€45.88
Available

SD-910 tap with 10 dB attenuation is used in multiswitch installations. It is used to separate signals from the multiswitch bus.
• 8 taps for SAT + terrestrial TV
• Replaces 9 single TV/SAT taps
• Possibility of switching off the DC line
• Attenuation of tap path 10 dB
• Armoured casing guaranteeing high level of screening - class A
Code: R70524
€78.61
Available

SD-920 tap with 20 dB attenuation is used in multiswitch installations. It is used to separate signals from the multiswitch bus.
• 8 taps for SAT + terrestrial TV
• Replaces 9 single TV/SAT taps
• Possibility of switching off the DC line
• Attenuation of tap path 20 dB
• Armoured casing guaranteeing high level of screening - class A
Code: R70526
€82.50
Available

SD-915 taps with 15 dB attenuation are used in multiswitch installations. It is used to separate signals from the multiswitch bus.
• 8 taps for SAT + terrestrial TV
• Replaces 9 single TV/SAT taps
• Possibility of switching off the DC line
• Attenuation of tap path 15 dB
• Armoured casing guaranteeing high level of screening - class A
Code: R70525
€81.83
Available