EN
PL
CZ
DE
IE
HU
PT
RO
SK
This section includes devices and equipment intended for making installations in which the signal source is the terrestrial TV and DVB-T and satellite TV. The offered products include, among others: TV and radio antennas, satellite dishes, coaxial cables, amplifiers and multiswitches, which can be used for both, individual and SMATV systems in residential buildings, hotels, commercial buildings, etc.
Antenna installers will find professional DVB-T2 and DVB-S2 signal meters here. The distribution of DVB-T2 terrestrial and satellite television signals in hotels and commercial buildings requires dedicated headend panels and digital modulators. The offer also includes IPTV station panels.
The offer is complemented by devices for transmission of HDMI signals, connectors, splitters, antenna splitters, TV/SAT and multimedia connectors.
Antenna installers will find professional DVB-T2 and DVB-S2 signal meters here. The distribution of DVB-T2 terrestrial and satellite television signals in hotels and commercial buildings requires dedicated headend panels and digital modulators. The offer also includes IPTV station panels.
The offer is complemented by devices for transmission of HDMI signals, connectors, splitters, antenna splitters, TV/SAT and multimedia connectors.
The Signal H3644 HDMI converter enables HDMI signals to be transmitted over long distances using Category 6 or higher twisted-pair cables.
• Transmission via a single Cat. 5/5e/6 6/6A/7 cable
• Transmission speed up to 18 Gbps
• Image type 4K x 2K 60 Hz
• No delays
• Support for DTS, Dolby
• Support for Audio Return Channel (ARC) and S/PDIF
• Bidirectional IR remote control extender
• Transmission speed up to 18 Gbps
• Image type 4K x 2K 60 Hz
• No delays
• Support for DTS, Dolby
• Support for Audio Return Channel (ARC) and S/PDIF
• Bidirectional IR remote control extender
Modulator Signal-420 HDMI – 1×COFDM (DVB-T) enables the conversion of signals from one HDMI source to the DVB-T standard.
• Proven HDMI-DVB-T modulator in many installations
• Converts signal from any HDMI source
• High quality digital signal in HD/SD standard
• Ideal for collective TV installations, hotels, RTV shops, galleries, pubs, etc.
• Simple installation, intuitive configuration
• Configurable parameters such as LCN, SID, PID, NIT
• Converts signal from any HDMI source
• High quality digital signal in HD/SD standard
• Ideal for collective TV installations, hotels, RTV shops, galleries, pubs, etc.
• Simple installation, intuitive configuration
• Configurable parameters such as LCN, SID, PID, NIT
The MRP-508 Signal 5/8 multiswitch with a passive terrestrial TV path enables the implementation of RTV/SAT installations in detached houses and small residential and office buildings.
• Radial topology
• 8 outputs
• Passive FM/DAB/DVB-T path with On/Off 12 VDC
• Isolation between inputs >25 dB
• High isolation between outputs: 28 dB
• Cable characteristics equalization
• Very high maximum input level: 105 dBμV
• High maximum output: 100 dBμV
• Compact size: 146×120×42 mm
• 8 outputs
• Passive FM/DAB/DVB-T path with On/Off 12 VDC
• Isolation between inputs >25 dB
• High isolation between outputs: 28 dB
• Cable characteristics equalization
• Very high maximum input level: 105 dBμV
• High maximum output: 100 dBμV
• Compact size: 146×120×42 mm
The MRP-908 Signal 9/8 multiswitch with passive terrestrial TV path makes it possible to implement RTV/SAT installations in detached houses and small residential and office buildings.
• Radial multiswitch
• Dual satellite and DVB-T/T2 signals
• 8 outputs
• Passive FM/DVB-T/T2 path equipped with On/Off switch 12 V DC
• Separation between inputs greater than 25 dB
• High separation of outputs: 30 dB
• Cable characteristic adjustment
• Very high input level: 105 dBμV
• High output level: 100 dBμV
• Compact dimensions
• Dual satellite and DVB-T/T2 signals
• 8 outputs
• Passive FM/DVB-T/T2 path equipped with On/Off switch 12 V DC
• Separation between inputs greater than 25 dB
• High separation of outputs: 30 dB
• Cable characteristic adjustment
• Very high input level: 105 dBμV
• High output level: 100 dBμV
• Compact dimensions
MRP-512 Signal 5/12 multiswitch with passive terrestrial TV path enables the implementation of RTV/SAT installations in detached houses and small residential and office buildings.
• Radial multiswitch
• 12 outputs
• Passive FM/DVB-T/T2 path equipped with On/Off switch 12 V DC
• Separation between inputs greater than 25 dB
• High separation of outputs: 30 dB
• Cable characteristic adjustment
• Very high input level: 105 dBμV
• High output level: 100 dBμV
• compact dimensions
• 12 outputs
• Passive FM/DVB-T/T2 path equipped with On/Off switch 12 V DC
• Separation between inputs greater than 25 dB
• High separation of outputs: 30 dB
• Cable characteristic adjustment
• Very high input level: 105 dBμV
• High output level: 100 dBμV
• compact dimensions
The SIGNAL-4K modulator is a professional device that enables the conversion of an HDMI signal in 4K Ultra HD/Full HD resolution to a DVB-T2 digital terrestrial television signal.
• Supports HDMI input up to 4K UHD 2160p
• H.264 or H.265 (HEVC) compression
• RF output in DVB-T2/T/C standard in 4K UHD 2160p resolution
• Programmable channel number and LCN
• Configurable PID, NIT, SID
• Easy installation, intuitive configuration via RJ-45 port (web browser) or buttons located on the front casing
• Ideal for collective TV installations, hotels, RTV shops, galleries, pubs, etc.
• The device is an excellent alternative to installations based on splitters and HDMI cables
• H.264 or H.265 (HEVC) compression
• RF output in DVB-T2/T/C standard in 4K UHD 2160p resolution
• Programmable channel number and LCN
• Configurable PID, NIT, SID
• Easy installation, intuitive configuration via RJ-45 port (web browser) or buttons located on the front casing
• Ideal for collective TV installations, hotels, RTV shops, galleries, pubs, etc.
• The device is an excellent alternative to installations based on splitters and HDMI cables
The Signal R-8 signal splitter splits CATV signals in the 5-1000 MHz band.
• DVB-T/T2 signal splitting into eight channels
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
The Signal Repeater makes it possible to create long connections via HDMI cable. The devices must be installed between the long cables.
• HDMI regeneration
• Possibility of transmitting HDMI signals over distances up to 45 m
• Transmission of HD video up to 1080p
• Quick and easy installation
• Possibility of transmitting HDMI signals over distances up to 45 m
• Transmission of HD video up to 1080p
• Quick and easy installation
The operating frequency range is 5-1000 MHz. The tap is equipped with F connectors and cast aluminum housing.
• Dedicated to FM and TV systems
• Die-cast enclosure
• High input/output separation
• Screening efficiency class A
• Die-cast enclosure
• High input/output separation
• Screening efficiency class A
The HDMI to IP converter enables the high definition (4K) signal connection to the receiver (TV, monitor) via the IP network. USB extender.
• HDMI transmission using a single cable cat. 5e/6
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 4K
• Maximum cable length 100 m
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 4K
• Maximum cable length 100 m
