English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
This section includes devices and equipment intended for making installations in which the signal source is the terrestrial TV and DVB-T and satellite TV. The offered products include, among others: TV and radio antennas, satellite dishes, coaxial cables, amplifiers and multiswitches, which can be used for both, individual and SMATV systems in residential buildings, hotels, commercial buildings, etc.
Antenna installers will find professional DVB-T2 and DVB-S2 signal meters here. The distribution of DVB-T2 terrestrial and satellite television signals in hotels and commercial buildings requires dedicated headend panels and digital modulators. The offer also includes IPTV station panels.
The offer is complemented by devices for transmission of HDMI signals, connectors, splitters, antenna splitters, TV/SAT and multimedia connectors.
Antenna installers will find professional DVB-T2 and DVB-S2 signal meters here. The distribution of DVB-T2 terrestrial and satellite television signals in hotels and commercial buildings requires dedicated headend panels and digital modulators. The offer also includes IPTV station panels.
The offer is complemented by devices for transmission of HDMI signals, connectors, splitters, antenna splitters, TV/SAT and multimedia connectors.
The HDMI to IP converter enables the high definition (4K) signal connection to the receiver (TV, monitor) via the IP network. USB extender
• HDMI transmission using a single cable cat. 5e/6
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 4K
• Maximum cable length 100 m
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 4K
• Maximum cable length 100 m
DiSEqC 2.0 switch 2x1 Signal DS-7070 R852511 is used in individual satellite systems distributing signals from two satellites. The switch inputs are connected with two single LNBs, e.g. A9827, the output with the satellite receiver.
• New! DiSEqC 2.0 switch,
• High isolation between inputs and between output and inactive input,
• Ground connector,
• Casing made of ABS resin,
• Easy mounting,
• Two fastening bands.
• High isolation between inputs and between output and inactive input,
• Ground connector,
• Casing made of ABS resin,
• Easy mounting,
• Two fastening bands.
The HDMI Slim cable meets all the requirements of the HDMI 2.1 standard. It has a small diameter (4 mm) and a short bending radius (40 mm).
• Length: 2 m,
• HDMI v2.1 standard,
• Cable thickness is 4 mm,
• Plug size 18 mm at the widest point,
• Image transmission at a maximum resolution of 7680×4320p,
• Image transmission at FullHD, UltraHD, 8K,
• Support for dynamic HDR (HDR10+),
• Support for enhanced audio return channel (eARC),
• Maximum bandwidth
• HDMI v2.1 standard,
• Cable thickness is 4 mm,
• Plug size 18 mm at the widest point,
• Image transmission at a maximum resolution of 7680×4320p,
• Image transmission at FullHD, UltraHD, 8K,
• Support for dynamic HDR (HDR10+),
• Support for enhanced audio return channel (eARC),
• Maximum bandwidth
The HDMI to IP converter enables the high definition (4K) signal connection to the receiver (TV, monitor) via the IP network. USB extender
• HDMI transmission using a single cable cat. 5e/6
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 4K
• Maximum cable length 100 m
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 4K
• Maximum cable length 100 m
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network. USB extender.
• HDMI transmission using a single cable cat. 5e/6
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 1080p
• Maximum cable length 100 m
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 1080p
• Maximum cable length 100 m
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network. USB extender.
• HDMI transmission using a single cable cat. 5e/6
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 1080p
• Maximum cable length 100 m
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 1080p
• Maximum cable length 100 m
The new family of Signal multiswitches enables the implementation of antenna systems for reception of satellite and terrestrial TV and radio signals in single-family houses as well as small residential and office buildings. The multiswitches are designed to work indoors. Due to star topology, all ca...
• Compact multiswitch in radial topology,
• Inputs: 4 from a quatro LNB, 1 from terrestrial antenna,
• Outputs: 4 to SAT receivers,
• Passive FM/DAB/DVB-T path with On/Off 12 VDC switch,
• Isolation between inputs >25 dB,
• High isolation between outputs: 28 dB (no crosstalk between bands and polarizations),
• Cable characteristics equalization,
• Very high maximum input level: 105 dBμV,
• High maximum output: 100 dBμV,
• Voltage indicators in the power supply unit and the multiswitch (simple diagnostics of a power failure and/or short circuit in the terrestrial path),
• External power supply: 18 VDC / 1 A.
• Inputs: 4 from a quatro LNB, 1 from terrestrial antenna,
• Outputs: 4 to SAT receivers,
• Passive FM/DAB/DVB-T path with On/Off 12 VDC switch,
• Isolation between inputs >25 dB,
• High isolation between outputs: 28 dB (no crosstalk between bands and polarizations),
• Cable characteristics equalization,
• Very high maximum input level: 105 dBμV,
• High maximum output: 100 dBμV,
• Voltage indicators in the power supply unit and the multiswitch (simple diagnostics of a power failure and/or short circuit in the terrestrial path),
• External power supply: 18 VDC / 1 A.
The SIGNAL 18 VDC / 1 A R71451 power supply is dedicated for multiswitches from the MRP series. The cable is terminated with F plug.
The splitter is CE certified. Its operating frequency range is 5-1000 MHz and the product represents good, standard parameters within its class. It is equipped with F connectors and cast aluminum housing.
• Splits DVB-T / FM signals into two paths
• Operating band: 5-1000 MHz
• F-f connectors
• Cast aluminum housing
• Operating band: 5-1000 MHz
• F-f connectors
• Cast aluminum housing
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network.
• Transmission via a single Cat. 5e/6 cable
• Minimized data stream in the network
• UDP/IP protocol (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• Maximum length of cable: 100 meters
• Minimized data stream in the network
• UDP/IP protocol (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• Maximum length of cable: 100 meters
