English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
This section includes devices and equipment intended for making installations in which the signal source is the terrestrial TV and DVB-T and satellite TV. The offered products include, among others: TV and radio antennas, satellite dishes, coaxial cables, amplifiers and multiswitches, which can be used for both, individual and SMATV systems in residential buildings, hotels, commercial buildings, etc.
Antenna installers will find professional DVB-T2 and DVB-S2 signal meters here. The distribution of DVB-T2 terrestrial and satellite television signals in hotels and commercial buildings requires dedicated headend panels and digital modulators. The offer also includes IPTV station panels.
The offer is complemented by devices for transmission of HDMI signals, connectors, splitters, antenna splitters, TV/SAT and multimedia connectors.
Antenna installers will find professional DVB-T2 and DVB-S2 signal meters here. The distribution of DVB-T2 terrestrial and satellite television signals in hotels and commercial buildings requires dedicated headend panels and digital modulators. The offer also includes IPTV station panels.
The offer is complemented by devices for transmission of HDMI signals, connectors, splitters, antenna splitters, TV/SAT and multimedia connectors.
Signal-HD HDMI to IP converter enables the user to connect remote (up to 100 m) source of HD content to HD-enabled television/monitor, using one CAT5e/6 cable. The set includes transmitter and receiver units, as well as remote control extender for a Blu-ray/DVD player, STB etc.
• HDMI to IP conversion
• UDP/IP protocol (multicast)
• Possibility of point-to-multipoint topology (switch)
• Built-in remote control extender function
• UDP/IP protocol (multicast)
• Possibility of point-to-multipoint topology (switch)
• Built-in remote control extender function
The Signal-HD HDMI to IP converter enables the user to connect a remote (up to 100 m) source of HD content to an HD-enabled television/monitor, using one CAT5e/6 cable. The set includes transmitter and receiver units. USB ports in the units also allow for remote control of e.g. a DVR/NVR, by using a...
• HDMI transmission via a single Cat. 5e/6 cable
• USB extender for remote control of e.g. DVR/NVR!
• UDP/IP protocol
• Support for 1080p mode
• Maximum length of the transmission cable: 100 meters
• USB extender for remote control of e.g. DVR/NVR!
• UDP/IP protocol
• Support for 1080p mode
• Maximum length of the transmission cable: 100 meters
Signal-HD HDMI 2.0 Switcher 3x1 H3132 enables the user to connect up to three sources of high-definition signals (up to 4K x 2K at 60 Hz) to a modern television or monitor equipped with HDMI input. The amplified output signal can be transmitted via HDMI 2.0 cable over distance up to 15 m. The choic...
• Connection of 3 sources of high-definition signals to one HDMI input
• Support for HDMI 2.0
• Support for 4K x 2K resolution
• Support for 3D
• Remote control
• Support for HDMI 2.0
• Support for 4K x 2K resolution
• Support for 3D
• Remote control
Signal ZMZ-13 surge protection installation box R48615 has been designed for comprehensive protection of SMATV systems based on multiswitches. The device protects all the satellite and terrestrial TV paths (13) against voltage surges induced in signal lines by lightning strokes. Intended for mountin...
The splitter is CE certified. Its operating frequency range is 5-1000 MHz and the product represents good, standard parameters within its class. It is equipped with F connectors and cast aluminum housing.
In bigger installations, the differences of potentials between individual parts of the antenna/cable networks may cause overvoltages and surge currents effecting in sparks when connecting the equipment (and even light electric shocks). It may also be the reason of unexpected damages of the equipment...
• Solves problems caused by potential differences between network segments, network and receivers etc.
• Operating band: 2400 MHz
• Low loss (<1.5 dB up to 1000 MHz)
• Full galvanic isolation (both of signal path and screen
• Breakdown voltage 3000 V for 1 minute test with current leak < 0.7 mA
• Operating band: 2400 MHz
• Low loss (<1.5 dB up to 1000 MHz)
• Full galvanic isolation (both of signal path and screen
• Breakdown voltage 3000 V for 1 minute test with current leak < 0.7 mA
• DVB-T2 standard terrestrial TV reception
• HEVC (H.265 /MPEG-H) encoding support
• Reception of audio in MPEG-2 Audio and Dolby E-AC-3 standard
• Hotel mode
• HDMI CEC function – turning on the tuner turns on the TV and vice versa (when using AC power)
• Program list copying
• Power supply from TV USB port or 5V power adapter
• Universal, learning remote control
• Semi-Twin Tuner – it is possible to record one channel and watch another at the same time, provided they are on the same multiplex
• Multilingual menu: Polish, English, German, Czech, Hungarian, Slovak, Croatian, Portuguese, Italian
• Reception of high definition channels (High Definition)
• Programmable timer support
• Teletext and subtitle support
• Logical Channel Number (LCN) support
• Possibility to manually change the order of programs and numbering
• Teletext and subtitle support
• Electronic Program Guide (EPG)
• PVR Ready function
• TimeShift
• Multimedia player
• Very high sensitivity DVB- head
• Low heat emission
• HEVC (H.265 /MPEG-H) encoding support
• Reception of audio in MPEG-2 Audio and Dolby E-AC-3 standard
• Hotel mode
• HDMI CEC function – turning on the tuner turns on the TV and vice versa (when using AC power)
• Program list copying
• Power supply from TV USB port or 5V power adapter
• Universal, learning remote control
• Semi-Twin Tuner – it is possible to record one channel and watch another at the same time, provided they are on the same multiplex
• Multilingual menu: Polish, English, German, Czech, Hungarian, Slovak, Croatian, Portuguese, Italian
• Reception of high definition channels (High Definition)
• Programmable timer support
• Teletext and subtitle support
• Logical Channel Number (LCN) support
• Possibility to manually change the order of programs and numbering
• Teletext and subtitle support
• Electronic Program Guide (EPG)
• PVR Ready function
• TimeShift
• Multimedia player
• Very high sensitivity DVB- head
• Low heat emission
The SIGNAL 2A 18 VDC R71455 power supply is intended for powering MRP and TERRA MV/MS multiswitches. The output is terminated with F male connector.
The subscriber terminal outlet Signal RTV R694130 has been designed for use in individual and shared antenna systems distributing terrestrial DVB-T, DAB and FM signals.
• Affordable high quality TV and FM outlet
• For flush or surface mounting
• Attenuation in TV path (UHF): 1.2 dB
• Attenuation in FM path 1.8 dB
• For flush or surface mounting
• Attenuation in TV path (UHF): 1.2 dB
• Attenuation in FM path 1.8 dB
