EN
PL
CZ
DE
IE
HU
PT
RO
SK
This section includes devices and equipment intended for making installations in which the signal source is the terrestrial TV and DVB-T and satellite TV. The offered products include, among others: TV and radio antennas, satellite dishes, coaxial cables, amplifiers and multiswitches, which can be used for both, individual and SMATV systems in residential buildings, hotels, commercial buildings, etc.
Antenna installers will find professional DVB-T2 and DVB-S2 signal meters here. The distribution of DVB-T2 terrestrial and satellite television signals in hotels and commercial buildings requires dedicated headend panels and digital modulators. The offer also includes IPTV station panels.
The offer is complemented by devices for transmission of HDMI signals, connectors, splitters, antenna splitters, TV/SAT and multimedia connectors.
Antenna installers will find professional DVB-T2 and DVB-S2 signal meters here. The distribution of DVB-T2 terrestrial and satellite television signals in hotels and commercial buildings requires dedicated headend panels and digital modulators. The offer also includes IPTV station panels.
The offer is complemented by devices for transmission of HDMI signals, connectors, splitters, antenna splitters, TV/SAT and multimedia connectors.
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network.
• Transmission via a single Cat. 5e/6 cable
• Low data stream load to the network
• UDP/IP transmission (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• Maximum cable length: 100 meters
• Low data stream load to the network
• UDP/IP transmission (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• Maximum cable length: 100 meters
The HDMI to IP converter enables a high-definition (HD) signal to be connected to a receiver (TV, monitor) via an IP network. USB extender.
• HDMI transmission via one cat 5e/6 cable
• USB extender - DVR control capability
• UDP/IP transmission
• 1080p video mode
• Maximum cable length 100 m
• USB extender - DVR control capability
• UDP/IP transmission
• 1080p video mode
• Maximum cable length 100 m
Signal surge protection box has been designed to provide comprehensive protection of SMATV systems, especially multiswitch installations.
• Number of protectors 12
• Operating band 5-2400 MHz
• Maximum current for 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
• Operating band 5-2400 MHz
• Maximum current for 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
DISEQC 2.0 2X1 DS-7070 Signal switch used in installations distributing signals from two satellites.
• DiseqC switch
• 2 inputs, 1 output
• High isolation between inputs and outputs
• Grounding connector
• ABS housing
• Easy to install
• Two cable ties to ensure proper attachment
• 2 inputs, 1 output
• High isolation between inputs and outputs
• Grounding connector
• ABS housing
• Easy to install
• Two cable ties to ensure proper attachment
The SIGNAL 18 VDC / 1 A R71451 power supply is dedicated for multiswitches from the MRP series. The cable is terminated with F plug.
• AC input 100...240 V, 50/60 Hz
• DC output 18 V, 1 A
• Output: F plug
• Recommended for MRP series multiswitches
• DC output 18 V, 1 A
• Output: F plug
• Recommended for MRP series multiswitches
ZMZ-12 Signal is designed to provide comprehensive protection of SMATV systems, in particular multiswitch installations.
• Interior / exterior box made of PA 11 aluminium alloy, powder-coated in RAL 7035
• Cable entry points are located at the bottom of the box
• Number of protectors 12
• Operating band 5-2400 MHz
• Maximum current at 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
• Cable entry points are located at the bottom of the box
• Number of protectors 12
• Operating band 5-2400 MHz
• Maximum current at 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
Surge protection protects the system from the effects of overvoltages and voltages induced in conductors due to lightning.
• Lightning protection of TV and SAT TV devices
• Pass band: 5-2400 MHz
• Insertion loss not higher than 1.5 dB
• Maximum current (8/20 µs): 8 kA
• Screening efficiency: A class
• Pass band: 5-2400 MHz
• Insertion loss not higher than 1.5 dB
• Maximum current (8/20 µs): 8 kA
• Screening efficiency: A class
The 1>6F Signal satellite splitter allows the signal to be split into 6 subnetworks in the 5-2400 MHz band.
• Splitting signals into 6 paths
• Operating band: 5 - 2400 MHz
• DC pass between outputs and input
• Signal loss (IN/OUT): 12 dB
• Operating band: 5 - 2400 MHz
• DC pass between outputs and input
• Signal loss (IN/OUT): 12 dB
The 1>4F Signal satellite splitter allows the signal to be split into 4 subnetworks in the 5-2400 MHz band.
• Splitting signals into 4 paths
• Operating band: 5 - 2400 MHz
• DC pass between outputs and input
• Signal loss (IN/OUT): 10 dB
• Operating band: 5 - 2400 MHz
• DC pass between outputs and input
• Signal loss (IN/OUT): 10 dB
ZPZ-12 Signal has been designed to provide comprehensive protection of SMATV systems, in particular multiswitch installations.
• Interior/exterior box made of PA 11 aluminium alloy, powder-coated in RAL 7035
• The cable holes are placed through the box
• Number of interconnectors 12
• Operating bandwidth 5-2400 MHz
• Maximum current at 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
• The cable holes are placed through the box
• Number of interconnectors 12
• Operating bandwidth 5-2400 MHz
• Maximum current at 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
