EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
This section includes devices and equipment intended for making installations in which the signal source is the terrestrial TV and DVB-T and satellite TV. The offered products include, among others: TV and radio antennas, satellite dishes, coaxial cables, amplifiers and multiswitches, which can be used for both, individual and SMATV systems in residential buildings, hotels, commercial buildings, etc.
Antenna installers will find professional DVB-T2 and DVB-S2 signal meters here. The distribution of DVB-T2 terrestrial and satellite television signals in hotels and commercial buildings requires dedicated headend panels and digital modulators. The offer also includes IPTV station panels.
The offer is complemented by devices for transmission of HDMI signals, connectors, splitters, antenna splitters, TV/SAT and multimedia connectors.
Antenna installers will find professional DVB-T2 and DVB-S2 signal meters here. The distribution of DVB-T2 terrestrial and satellite television signals in hotels and commercial buildings requires dedicated headend panels and digital modulators. The offer also includes IPTV station panels.
The offer is complemented by devices for transmission of HDMI signals, connectors, splitters, antenna splitters, TV/SAT and multimedia connectors.
The HDMI 1x4 splitter makes it possible to distribute the HDMI signal to four TV sets at the same time. In addition, the device supports EDID functions.
• Signal distribution to 4 TVs
• EDID function
• Supports HDMI 2.0 standard
• Supports 4Kx2K 60 Hz resolution
• Supports DTS Digital, Dolby Digital, DTS-HD, Dolby True HD audio compression
• EDID function
• Supports HDMI 2.0 standard
• Supports 4Kx2K 60 Hz resolution
• Supports DTS Digital, Dolby Digital, DTS-HD, Dolby True HD audio compression
Signal HD's HDMI 1x8 splitter allows HDMI signals to be distributed to up to eight TV sets simultaneously.
• Signal distribution to up to 8 TVs
• Supports HDMI 2.0 standard
• Supports 4Kx2K 60 Hz resolution
• Supports DTS Digital, Dolby Digital, DTS-HD audio compression
• Supports HDMI 2.0 standard
• Supports 4Kx2K 60 Hz resolution
• Supports DTS Digital, Dolby Digital, DTS-HD audio compression
The HDMI fiber optic converter allows for connection of HD signal to a receiver (TV, monitor) via optical network. IR extender.
• Transmission of HDMI signal via one single-mode fiber
• Max. range of 20 km
• Signal source remote control possible - IR signal transmission
• Transmission of SD and HD signals and HD 1080p
• Support for HDCP
• Max. range of 20 km
• Signal source remote control possible - IR signal transmission
• Transmission of SD and HD signals and HD 1080p
• Support for HDCP
Signal HD's HDMI 1x2 splitter allows HDMI signals to be distributed to two TV sets simultaneously.
• Signal distribution to 2 TVs
• Supports HDMI 2.0 standard
• Supports 4Kx2K 60 Hz resolution
• Supports DTS Digital, Dolby Digital, DTS-HD audio compression
• Supports HDMI 2.0 standard
• Supports 4Kx2K 60 Hz resolution
• Supports DTS Digital, Dolby Digital, DTS-HD audio compression
The Signal H3644 HDMI converter enables HDMI signals to be transmitted over long distances using Category 6 or higher twisted-pair cables.
• Transmission via a single Cat. 5/5e/6 6/6A/7 cable
• Transmission speed up to 18 Gbps
• Image type 4K x 2K 60 Hz
• No delays
• Support for DTS, Dolby
• Support for Audio Return Channel (ARC) and S/PDIF
• Bidirectional IR remote control extender
• Transmission speed up to 18 Gbps
• Image type 4K x 2K 60 Hz
• No delays
• Support for DTS, Dolby
• Support for Audio Return Channel (ARC) and S/PDIF
• Bidirectional IR remote control extender
Single-channel digital HDMI - DVB-T modulator dedicated to small systems.
• Digital HDMI-DVB-T modulator
• Dedicated to small systems
• Distribution of A/V signal in coaxial cable
• High-quality digital signal of Full HD standard (1080P/60 Hz)
• Excellent alternative for splitters and dozens of HDMI cables
• Easy system, intuitive setup
• Dedicated to small systems
• Distribution of A/V signal in coaxial cable
• High-quality digital signal of Full HD standard (1080P/60 Hz)
• Excellent alternative for splitters and dozens of HDMI cables
• Easy system, intuitive setup
The SIGNAL-4K modulator is a professional device that enables the conversion of an HDMI signal in 4K Ultra HD/Full HD resolution to a DVB-T2 digital terrestrial television signal.
• Supports HDMI input up to 4K UHD 2160p
• H.264 or H.265 (HEVC) compression
• RF output in DVB-T2/T/C standard in 4K UHD 2160p resolution
• Programmable channel number and LCN
• Configurable PID, NIT, SID
• Easy installation, intuitive configuration via RJ-45 port (web browser) or buttons located on the front casing
• Ideal for collective TV installations, hotels, RTV shops, galleries, pubs, etc.
• The device is an excellent alternative to installations based on splitters and HDMI cables
• H.264 or H.265 (HEVC) compression
• RF output in DVB-T2/T/C standard in 4K UHD 2160p resolution
• Programmable channel number and LCN
• Configurable PID, NIT, SID
• Easy installation, intuitive configuration via RJ-45 port (web browser) or buttons located on the front casing
• Ideal for collective TV installations, hotels, RTV shops, galleries, pubs, etc.
• The device is an excellent alternative to installations based on splitters and HDMI cables
The splitter operates from 5-1000 MHz and its performance is similar to other splitters in this class.
• Operating bandwidth 5-1000 MHz
• Spur attenuation 12 dB
• F-type connectors
• Cast aluminium alloy housing
• Spur attenuation 12 dB
• F-type connectors
• Cast aluminium alloy housing
The HDMI Signal cable meets all the requirements of the HDMI 2.1 standard. It has a small diameter (4 mm) and a short bending radius.
• Length: 1 m,
• HDMI v2.1 standard,
• Cable thickness is 4 mm,
• Plug size 18 mm at the widest point,
• Image transmission at a maximum resolution of 7680×4320p,
• Image transmission at FullHD, UltraHD, 8K,
• Support for dynamic HDR (HDR10+),
• Support for enhanced audio return channel (eARC),
• Maximum bandwidth up to 48Gbps,
• Ethernet channel.
• HDMI v2.1 standard,
• Cable thickness is 4 mm,
• Plug size 18 mm at the widest point,
• Image transmission at a maximum resolution of 7680×4320p,
• Image transmission at FullHD, UltraHD, 8K,
• Support for dynamic HDR (HDR10+),
• Support for enhanced audio return channel (eARC),
• Maximum bandwidth up to 48Gbps,
• Ethernet channel.
The Signal R-8 signal splitter splits CATV signals in the 5-1000 MHz band.
• DVB-T/T2 signal splitting into eight channels
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
Modulator Signal-420 HDMI – 1×COFDM (DVB-T) enables the conversion of signals from one HDMI source to the DVB-T standard.
• Proven HDMI-DVB-T modulator in many installations
• Converts signal from any HDMI source
• High quality digital signal in HD/SD standard
• Ideal for collective TV installations, hotels, RTV shops, galleries, pubs, etc.
• Simple installation, intuitive configuration
• Configurable parameters such as LCN, SID, PID, NIT
• Converts signal from any HDMI source
• High quality digital signal in HD/SD standard
• Ideal for collective TV installations, hotels, RTV shops, galleries, pubs, etc.
• Simple installation, intuitive configuration
• Configurable parameters such as LCN, SID, PID, NIT
The MRP-508 Signal 5/8 multiswitch with a passive terrestrial TV path enables the implementation of RTV/SAT installations in detached houses and small residential and office buildings.
• Radial topology
• 8 outputs
• Passive FM/DAB/DVB-T path with On/Off 12 VDC
• Isolation between inputs >25 dB
• High isolation between outputs: 28 dB
• Cable characteristics equalization
• Very high maximum input level: 105 dBμV
• High maximum output: 100 dBμV
• Compact size: 146×120×42 mm
• 8 outputs
• Passive FM/DAB/DVB-T path with On/Off 12 VDC
• Isolation between inputs >25 dB
• High isolation between outputs: 28 dB
• Cable characteristics equalization
• Very high maximum input level: 105 dBμV
• High maximum output: 100 dBμV
• Compact size: 146×120×42 mm
The MRP-908 Signal 9/8 multiswitch with passive terrestrial TV path makes it possible to implement RTV/SAT installations in detached houses and small residential and office buildings.
• Radial multiswitch
• Dual satellite and DVB-T/T2 signals
• 8 outputs
• Passive FM/DVB-T/T2 path equipped with On/Off switch 12 V DC
• Separation between inputs greater than 25 dB
• High separation of outputs: 30 dB
• Cable characteristic adjustment
• Very high input level: 105 dBμV
• High output level: 100 dBμV
• Compact dimensions
• Dual satellite and DVB-T/T2 signals
• 8 outputs
• Passive FM/DVB-T/T2 path equipped with On/Off switch 12 V DC
• Separation between inputs greater than 25 dB
• High separation of outputs: 30 dB
• Cable characteristic adjustment
• Very high input level: 105 dBμV
• High output level: 100 dBμV
• Compact dimensions
MRP-512 Signal 5/12 multiswitch with passive terrestrial TV path enables the implementation of RTV/SAT installations in detached houses and small residential and office buildings.
• Radial multiswitch
• 12 outputs
• Passive FM/DVB-T/T2 path equipped with On/Off switch 12 V DC
• Separation between inputs greater than 25 dB
• High separation of outputs: 30 dB
• Cable characteristic adjustment
• Very high input level: 105 dBμV
• High output level: 100 dBμV
• compact dimensions
• 12 outputs
• Passive FM/DVB-T/T2 path equipped with On/Off switch 12 V DC
• Separation between inputs greater than 25 dB
• High separation of outputs: 30 dB
• Cable characteristic adjustment
• Very high input level: 105 dBμV
• High output level: 100 dBμV
• compact dimensions
The Signal Repeater makes it possible to create long connections via HDMI cable. The devices must be installed between the long cables.
• HDMI regeneration
• Possibility of transmitting HDMI signals over distances up to 45 m
• Transmission of HD video up to 1080p
• Quick and easy installation
• Possibility of transmitting HDMI signals over distances up to 45 m
• Transmission of HD video up to 1080p
• Quick and easy installation
The operating frequency range is 5-1000 MHz. The tap is equipped with F connectors and cast aluminum housing.
• Dedicated to FM and TV systems
• Die-cast enclosure
• High input/output separation
• Screening efficiency class A
• Die-cast enclosure
• High input/output separation
• Screening efficiency class A
The HDMI to IP converter enables the high definition (4K) signal connection to the receiver (TV, monitor) via the IP network. USB extender.
• HDMI transmission using a single cable cat. 5e/6
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 4K
• Maximum cable length 100 m
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 4K
• Maximum cable length 100 m
The HDMI Slim cable meets all the requirements of the HDMI 2.1 standard. It has a small diameter (4 mm) and a short bending radius (40 mm).
• Length: 2 m,
• HDMI v2.1 standard,
• Cable thickness is 4 mm,
• Plug size 18 mm at the widest point,
• Image transmission at a maximum resolution of 7680×4320p,
• Image transmission at FullHD, UltraHD, 8K,
• Support for dynamic HDR (HDR10+),
• Support for enhanced audio return channel (eARC),
• Maximum bandwidth
• HDMI v2.1 standard,
• Cable thickness is 4 mm,
• Plug size 18 mm at the widest point,
• Image transmission at a maximum resolution of 7680×4320p,
• Image transmission at FullHD, UltraHD, 8K,
• Support for dynamic HDR (HDR10+),
• Support for enhanced audio return channel (eARC),
• Maximum bandwidth
The HDMI to IP converter enables the high definition (4K) signal connection to the receiver (TV, monitor) via the IP network. USB extender
• HDMI transmission using a single cable cat. 5e/6
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 4K
• Maximum cable length 100 m
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 4K
• Maximum cable length 100 m
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network. USB extender.
• HDMI transmission using a single cable cat. 5e/6
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 1080p
• Maximum cable length 100 m
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 1080p
• Maximum cable length 100 m
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network. USB extender.
• HDMI transmission using a single cable cat. 5e/6
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 1080p
• Maximum cable length 100 m
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 1080p
• Maximum cable length 100 m
The Signal R-2 signal splitter splits CATV signals in the 5-1000 MHz band.
• Splits DVB-T / FM signals into two paths
• Operating band: 5-1000 MHz
• F-f connectors
• Cast aluminum housing
• Operating band: 5-1000 MHz
• F-f connectors
• Cast aluminum housing
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network.
• Transmission via a single Cat. 5e/6 cable
• Minimised data stream in the network
• UDP/IP protocol (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• Maximum length of cable: 100 meters
• Minimised data stream in the network
• UDP/IP protocol (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• Maximum length of cable: 100 meters
The HDMI to IP converter enables a high-definition (HD) signal to be connected to a receiver (TV, monitor) via an IP network. IR extender.
• Transmission via a single Cat 5e/6 cable
• Low data load on the network
• UDP/IP transmission (multicast)
• Point-to-multipoint connections possible
• 1080p picture mode
• IR remote control extender
• Maximum cable length 100 m
• Low data load on the network
• UDP/IP transmission (multicast)
• Point-to-multipoint connections possible
• 1080p picture mode
• IR remote control extender
• Maximum cable length 100 m
The HDMI to IP converter enables a high-definition (HD) signal to be connected to a receiver (TV, monitor) via an IP network. USB extender.
• HDMI transmission over a single CAT 5e/6 cable
• USB extender - DVR control capability
• UDP/IP transmission
• 1080p video mode
• Maximum cable length 100 m
• USB extender - DVR control capability
• UDP/IP transmission
• 1080p video mode
• Maximum cable length 100 m
Signal HD's 3x1 Maki HDMI switch enables 3 high definition (HD) devices to be connected to a TV set equipped with an HDMI connector.
• Connection of 3 sources of high-definition signals to one HDMI input
• Support for HDMI 2.0
• Support for 4K x 2K resolution
• Support for 3D
• Remote control
• Support for HDMI 2.0
• Support for 4K x 2K resolution
• Support for 3D
• Remote control
Surface-mounted frame for Signal sockets.
• Surface-mounted frame
• Designed for Signal sockets
• White colour
• Designed for Signal sockets
• White colour
The Signal R-4 signal splitter allows the division of CATV signals in the 5-1000 MHz band.
• DVB-T/T2 signal splitting into four channels
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
A galvanic isolator is an element used in television installations to neutralise the negative effects of potential differences in the various branches of the network.
• Solves problems caused by potential differences between network segments, network and receivers etc.
• Operating band: 2400 MHz
• Low loss (<1.5 dB up to 1000 MHz)
• Full galvanic isolation (both of signal path and screen
• Breakdown voltage 3000 V for 1 minute test with current leak < 0.7 mA
• Operating band: 2400 MHz
• Low loss (<1.5 dB up to 1000 MHz)
• Full galvanic isolation (both of signal path and screen
• Breakdown voltage 3000 V for 1 minute test with current leak < 0.7 mA
The Signal T2-MINI receiver receives free-to-air channels broadcast on DVB-T2 digital terrestrial television in HEVC (H.265/MPEG-H) and H.264/MPEG-4 video coding technology with Dolby E-AC-3 audio.
• DVB-T2 standard terrestrial TV reception
• HEVC (H.265 /MPEG-H) encoding support
• Reception of audio in MPEG-2 Audio and Dolby E-AC-3 standard
• Hotel mode
• HDMI CEC function – turning on the tuner turns on the TV and vice versa (when using AC power)
• Program list copying
• Power supply from TV USB port or 5V power adapter
• Universal, learning remote control
• Semi-Twin Tuner – it is possible to record one channel and watch another at the same time, provided they are on the same multiplex
• Multilingual menu: Polish, English, German, Czech, Hungarian, Slovak, Croatian, Portuguese, Italian
• Reception of high definition channels (High Definition)
• Programmable timer support
• Teletext and subtitle support
• Logical Channel Number (LCN) support
• Possibility to manually change the order of programs and numbering
• Teletext and subtitle support
• Electronic Program Guide (EPG)
• PVR Ready function
• TimeShift
• Multimedia player
• Very high sensitivity DVB- head
• Low heat emission
• HEVC (H.265 /MPEG-H) encoding support
• Reception of audio in MPEG-2 Audio and Dolby E-AC-3 standard
• Hotel mode
• HDMI CEC function – turning on the tuner turns on the TV and vice versa (when using AC power)
• Program list copying
• Power supply from TV USB port or 5V power adapter
• Universal, learning remote control
• Semi-Twin Tuner – it is possible to record one channel and watch another at the same time, provided they are on the same multiplex
• Multilingual menu: Polish, English, German, Czech, Hungarian, Slovak, Croatian, Portuguese, Italian
• Reception of high definition channels (High Definition)
• Programmable timer support
• Teletext and subtitle support
• Logical Channel Number (LCN) support
• Possibility to manually change the order of programs and numbering
• Teletext and subtitle support
• Electronic Program Guide (EPG)
• PVR Ready function
• TimeShift
• Multimedia player
• Very high sensitivity DVB- head
• Low heat emission
Remote control for DVB-T2 receivers: Signal T2-MINI and Signal T2-BOX. It allows simultaneous control of a receiver and TV set (after a simple procedure of programming the remote control).
• Universal learning remote control
• Compatible with Signal T2-MINI and Signal T2-BOX receivers
• Power supply: 2x 1.5 V AAA
• Compatible with Signal T2-MINI and Signal T2-BOX receivers
• Power supply: 2x 1.5 V AAA
The RTV terminal socket (surface/plaster) is used in RTV installations.
• Affordable high quality TV and FM outlet
• For flush or surface mounting
• Attenuation in TV path (UHF): 1.2 dB
• Attenuation in FM path 1.8 dB
• For flush or surface mounting
• Attenuation in TV path (UHF): 1.2 dB
• Attenuation in FM path 1.8 dB
MRP-504 Signal 5/4 multiswitch with passive terrestrial TV path enables the implementation of RTV/SAT installations in detached houses and small residential and office buildings.
• Compact 5/4 multiswitch
• Inputs: 4 from quatro converter, 1 terrestrial DVB-T/T2
• Outputs: 4 for SAT tuners
• Passive FM/DVB-T/T2 path equipped with On/Off switch 12 V DC
• High output separation: 30 dB (no crosstalk between bands and polarities)
• Cable characteristics correction
• Very high input level: 105 dBμV
• High output level: 100 dBμV
• Voltage controls for power supply and multiswitch
• External power supply DC 18 V 1 A
• Inputs: 4 from quatro converter, 1 terrestrial DVB-T/T2
• Outputs: 4 for SAT tuners
• Passive FM/DVB-T/T2 path equipped with On/Off switch 12 V DC
• High output separation: 30 dB (no crosstalk between bands and polarities)
• Cable characteristics correction
• Very high input level: 105 dBμV
• High output level: 100 dBμV
• Voltage controls for power supply and multiswitch
• External power supply DC 18 V 1 A
The Signal R-6 signal splitter splits CATV signals in the 5-1000 MHz band.
• DVB-T/T2 signal splitting into six tracks
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
The RTV-SAT terminal socket (surface/plaster) is used in multiswitch installations.
• Outlet used in multiswitch installations
• Filtering of signals into 3 paths: radio, DVB-T/T2, TV-SAT
• Surface or flush mounting
• Easy to install
• Maximum attenuation 3.5 dB
• Filtering of signals into 3 paths: radio, DVB-T/T2, TV-SAT
• Surface or flush mounting
• Easy to install
• Maximum attenuation 3.5 dB
RTV-SAT+RJ45/11 end socket for integrating RTV/SAT systems with telephone and LAN. The RJ-45 port can be used for Ethernet, Fast Ethernet and Gigabit Ethernet.
• Universal multimedia socket
• Inputs: radio, terrestrial TV, satellite TV, Internet
• Flush-mounted
• Applicable for Ethernet, Fast Ethernet and Gigabit Ethernet
• Inputs: radio, terrestrial TV, satellite TV, Internet
• Flush-mounted
• Applicable for Ethernet, Fast Ethernet and Gigabit Ethernet
The Signal RTV-SAT+PVR terminal outlet is used in RTV/SAT installations to provide signals to twin PVR receivers.
• For dual head PVR tuners with recording
• Outputs: radio, TV, 2x SAT
• Surface or flush-mounted installation
• Attenuation in the RTV band 3.5 dB
• Ambient attenuation at SAT1 output 3.5 dB, at SAT2 output 3 dB
• Outputs: radio, TV, 2x SAT
• Surface or flush-mounted installation
• Attenuation in the RTV band 3.5 dB
• Ambient attenuation at SAT1 output 3.5 dB, at SAT2 output 3 dB
The SIGNAL 2A 18 VDC R71455 power supply is intended for powering MRP and TERRA MV/MS multiswitches. The output is terminated with F male connector.
• AC input 100...240 V, 50/60 Hz
• DC output 18 V, 2 A
• Output: F plug
• Recommended for MRP, MS and MV series multiswitches
• DC output 18 V, 2 A
• Output: F plug
• Recommended for MRP, MS and MV series multiswitches
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network.
• Transmission via a single Cat. 5e/6 cable
• Low data stream load to the network
• UDP/IP transmission (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• Maximum cable length: 100 meters
• Low data stream load to the network
• UDP/IP transmission (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• Maximum cable length: 100 meters
The HDMI to IP converter enables a high-definition (HD) signal to be connected to a receiver (TV, monitor) via an IP network. USB extender.
• HDMI transmission via one cat 5e/6 cable
• USB extender - DVR control capability
• UDP/IP transmission
• 1080p video mode
• Maximum cable length 100 m
• USB extender - DVR control capability
• UDP/IP transmission
• 1080p video mode
• Maximum cable length 100 m
Signal surge protection box has been designed to provide comprehensive protection of SMATV systems, especially multiswitch installations.
• Number of protectors 12
• Operating band 5-2400 MHz
• Maximum current for 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
• Operating band 5-2400 MHz
• Maximum current for 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
The SIGNAL 18 VDC / 1 A R71451 power supply is dedicated for multiswitches from the MRP series. The cable is terminated with F plug.
• AC input 100...240 V, 50/60 Hz
• DC output 18 V, 1 A
• Output: F plug
• Recommended for MRP series multiswitches
• DC output 18 V, 1 A
• Output: F plug
• Recommended for MRP series multiswitches
ZMZ-12 Signal is designed to provide comprehensive protection of SMATV systems, in particular multiswitch installations.
• Interior / exterior box made of PA 11 aluminium alloy, powder-coated in RAL 7035
• Cable entry points are located at the bottom of the box
• Number of protectors 12
• Operating band 5-2400 MHz
• Maximum current at 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
• Cable entry points are located at the bottom of the box
• Number of protectors 12
• Operating band 5-2400 MHz
• Maximum current at 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
Surge protection protects the system from the effects of overvoltages and voltages induced in conductors due to lightning.
• Lightning protection of TV and SAT TV devices
• Pass band: 5-2400 MHz
• Insertion loss not higher than 1.5 dB
• Maximum current (8/20 µs): 8 kA
• Screening efficiency: A class
• Pass band: 5-2400 MHz
• Insertion loss not higher than 1.5 dB
• Maximum current (8/20 µs): 8 kA
• Screening efficiency: A class
The 1>6F Signal satellite splitter allows the signal to be split into 6 subnetworks in the 5-2400 MHz band.
• Splitting signals into 6 paths
• Operating band: 5 - 2400 MHz
• DC pass between outputs and input
• Signal loss (IN/OUT): 12 dB
• Operating band: 5 - 2400 MHz
• DC pass between outputs and input
• Signal loss (IN/OUT): 12 dB
The 1>4F Signal satellite splitter allows the signal to be split into 4 subnetworks in the 5-2400 MHz band.
• Splitting signals into 4 paths
• Operating band: 5 - 2400 MHz
• DC pass between outputs and input
• Signal loss (IN/OUT): 10 dB
• Operating band: 5 - 2400 MHz
• DC pass between outputs and input
• Signal loss (IN/OUT): 10 dB
DISEQC 2.0 2X1 DS-7070 Signal switch used in installations distributing signals from two satellites.
• DiseqC switch
• 2 inputs, 1 output
• High isolation between inputs and outputs
• Grounding connector
• ABS housing
• Easy to install
• Two cable ties to ensure proper attachment
• 2 inputs, 1 output
• High isolation between inputs and outputs
• Grounding connector
• ABS housing
• Easy to install
• Two cable ties to ensure proper attachment
The Signal R-3 signal splitter splits CATV signals in the 5-1000 MHz band.
• DVB-T/T2 signal split into three channels
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
ZPZ-12 Signal has been designed to provide comprehensive protection of SMATV systems, in particular multiswitch installations.
• Interior/exterior box made of PA 11 aluminium alloy, powder-coated in RAL 7035
• The cable holes are placed through the box
• Number of interconnectors 12
• Operating bandwidth 5-2400 MHz
• Maximum current at 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
• The cable holes are placed through the box
• Number of interconnectors 12
• Operating bandwidth 5-2400 MHz
• Maximum current at 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
The 1>2F Signal satellite splitter allows the signal to be split into 2 subnetworks in the 5-2400 MHz band.
• Split TV-SAT signal on 2 tracks
• Operating bandwidth 5 - 2400 MHz
• DC pass-through between outputs and input
• Attenuation of I/O 4 dB
• Operating bandwidth 5 - 2400 MHz
• DC pass-through between outputs and input
• Attenuation of I/O 4 dB
The 1>3F Signal satellite splitter allows the signal to be split into 3 subnetworks in the 5-2400 MHz band.
• Splitting SAT TV and TV signals into 3 paths
• Operating band: 5-2400 MHz
• DC pass between outputs and input
• Insertion loss (input-output): 8 dB
• Operating band: 5-2400 MHz
• DC pass between outputs and input
• Insertion loss (input-output): 8 dB
The combo meter ST-6986 measures DVB-S/DVB-S2 (HD) satellite signal, DVB-T/T2 (HD) terrestrial TV signal in HEVC 10 Bit compression and DVB-C cable signal.
• Measures DVB-T/T2/C and DVB-S/S2 signals
• Supports DVB-T2 with H.265/HEVC 10 bit
• Views the received channel on the 7" LCD display
• Built-in video decoder: MPEG-2/H.264/H.265
• DiSEqC support: 1.0, 1.1,1.2, 0/22 kHz Tone, Unicable (dSCR), Wideband
• USB connector (possibility to take a screenshot of the current measurement)
• Signal strength and quality indication
• Optical power meter
• Measurement of all necessary signal parameters such as: Signal level expressed in dBμV, C/N, BER, MER
• Signal spectrum analyzer
• Constellation chart
• Satellite finding beeper (can be turned off)
• Car charger included
• Li-On 7.4 V/5000 mAh battery
• Editable satellite, transponder, frequency
• Short-circuit protection in satellite path (LNB)
• Supports DVB-T2 with H.265/HEVC 10 bit
• Views the received channel on the 7" LCD display
• Built-in video decoder: MPEG-2/H.264/H.265
• DiSEqC support: 1.0, 1.1,1.2, 0/22 kHz Tone, Unicable (dSCR), Wideband
• USB connector (possibility to take a screenshot of the current measurement)
• Signal strength and quality indication
• Optical power meter
• Measurement of all necessary signal parameters such as: Signal level expressed in dBμV, C/N, BER, MER
• Signal spectrum analyzer
• Constellation chart
• Satellite finding beeper (can be turned off)
• Car charger included
• Li-On 7.4 V/5000 mAh battery
• Editable satellite, transponder, frequency
• Short-circuit protection in satellite path (LNB)
The 1>8F Signal satellite splitter allows the signal to be divided into 8 subnetworks in the 5-2400 MHz band.
• Split TV-SAT signal on 8 tracks
• Operating bandwidth 5 - 2400 MHz
• DC pass-through between outputs and input
• Attenuation of I/O 14 dB
• Operating bandwidth 5 - 2400 MHz
• DC pass-through between outputs and input
• Attenuation of I/O 14 dB
Multipurpose meter ST-5155 allows to measure DVB-S2X/S2/S (HD) satellite signal, DVB-T/DVB-T2 (HD) terrestrial TV signal in HEVC 10 Bit compression and DVB-C cable signal.
• Measures DVB-T/T2/C and DVB-S2X/S2/S signals (fully compatible with MPEG-2/MPEG-4)
• Supports DVB-T2 with H.265/HEVC
• Views the received channel on LCD display
• Built-in video decoder: MPEG-2/H.264/H.265/HEVC 10 bit
• Percentage indication of signal strength and quality
• Measurement of all necessary signal parameters such as signal level expressed in dBμV, C/N, BER, MER
• Li-On 7.4 V/2600 mAh battery
• Possibility to edit satellite, transponder, frequency
• Supports DiSEqC: 1.0, 1.1, 0/22 kHz Tone, Unicable (dSCR), wideband
• USB connector (supported file format: wma,mp3,mp4,avi,jpg,jpeg,bmp,img)
• Satellite path short circuit protection (LNB)
• Supports DVB-T2 with H.265/HEVC
• Views the received channel on LCD display
• Built-in video decoder: MPEG-2/H.264/H.265/HEVC 10 bit
• Percentage indication of signal strength and quality
• Measurement of all necessary signal parameters such as signal level expressed in dBμV, C/N, BER, MER
• Li-On 7.4 V/2600 mAh battery
• Possibility to edit satellite, transponder, frequency
• Supports DiSEqC: 1.0, 1.1, 0/22 kHz Tone, Unicable (dSCR), wideband
• USB connector (supported file format: wma,mp3,mp4,avi,jpg,jpeg,bmp,img)
• Satellite path short circuit protection (LNB)
The RTV-SAT through socket outlet (surface/plaster) is used in RTV/SAT installations.
• Filtering of signals on 3 tracks: radio, DVB-T/T2, TV-SAT
• Surface or flush-mounted installation
• Easy to install
• Feed-through attenuation 3.5 dB
• Connection attenuation max. 14 dB
• Surface or flush-mounted installation
• Easy to install
• Feed-through attenuation 3.5 dB
• Connection attenuation max. 14 dB
The Li-Ion 7.4 V / 5000 mAh rechargeable battery is dedicated for the Signal WS-6980 R10837 DVB-T/T2/C and DVB-S/S2 meter.
• Lithium-ion battery
• Capacity 5000 mAh
• Fits to WS-6980 meter
• Capacity 5000 mAh
• Fits to WS-6980 meter
ZMZ-13 Signal is designed to provide comprehensive protection of SMATV systems, in particular multiswitch installations.
• Interior / exterior box made of PA 11 aluminium alloy, powder-coated in RAL 7035
• Cable openings are at the bottom of the box
• Number of protectors 13
• Operating band 5-2400 MHz
• Maximum current at 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
• Cable openings are at the bottom of the box
• Number of protectors 13
• Operating band 5-2400 MHz
• Maximum current at 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network. IR extender.
• Transmission via a single cat. 5e/6 cable
• Low data stream load to the network
• UDP/IP transmission (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• IR extender
• Maximum cable length: 100 meters
• Low data stream load to the network
• UDP/IP transmission (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• IR extender
• Maximum cable length: 100 meters
The LTE700 filter with 24 V Signal DC pass-through is used in RTV/SAT TV installations and is used to filter out unwanted signals in the 700 MHz band.
• LTE700 signal attenuation (band > 694 MHz)
• 24 V DC pass-through
• Very steep slope of attenuation characteristics at the band edge
• 24 V DC pass-through
• Very steep slope of attenuation characteristics at the band edge
The Li-Ion 7.4 V / 3000 mAh rechargeable battery dedicated for the Signal WS-6916 R10821 and Signal WS-6975 R10514 meters.
• Lithium-ion battery
• Capacity 3000 mAh
• Fits to WS-6916 and WS-6975 meters
• Capacity 3000 mAh
• Fits to WS-6916 and WS-6975 meters
Lithium-ion battery with a capacity 5000 mAh for DVB-T/T2/C and DVB-S/S2 ST-6986 Signal meters
• Lithium-ion rechargeable battery
• Capacity 5000 mAh
• Fits for ST-6986 meter
• Capacity 5000 mAh
• Fits for ST-6986 meter
Lithium-ion battery with a capacity 2600 mAh for DVB-T/T2/C and DVB-S/S2 ST-5150/ST-5155 Signal meters.
• Lithium-ion rechargeable battery
• Capacity 2600 mAh
• Fits for ST-5150 meter
• Fits for ST-5155 meter
• Capacity 2600 mAh
• Fits for ST-5150 meter
• Fits for ST-5155 meter
MS-900 SIGNAL PRO is a professional multiswitch bus amplifier for two satellite positions and RTV path.
• Dedicated to SIGNAL PRO series multiswitches
• Cascadable multiswitch systems
• Compensation of signal losses in cascaded installations
• 15 dB gain adjustable for each channel
• Stable operation in SAT and DVB-T2/DAB/FM paths
• Large SMATV systems in multi-family buildings
• Low insertion loss, high isolation between signal paths
• Cascadable multiswitch systems
• Compensation of signal losses in cascaded installations
• 15 dB gain adjustable for each channel
• Stable operation in SAT and DVB-T2/DAB/FM paths
• Large SMATV systems in multi-family buildings
• Low insertion loss, high isolation between signal paths
SIGNAL PRO impulse power supply intended for supplying devices requiring 20 V DC voltage, equipped with an F-type connector.
• Stable output voltage DC 20 V
• Current capacity 2.5 A
• Power supply to devices via coaxial cable
• High level of protection and reliability
• Current capacity 2.5 A
• Power supply to devices via coaxial cable
• High level of protection and reliability
The converter enables HDMI signals to be transmitted using CAT 6 or higher twisted-pair cables. The device is equipped with an IR extender.
• HDMI transmission over a single Cat. 6/6A/7 cable
• Up to 10.2 Gbps data transmission
• 1080p picture mode
• Range over CAT 6/6A/7 twisted pair cable up to 70 m
• IR remote control extender
• Up to 10.2 Gbps data transmission
• 1080p picture mode
• Range over CAT 6/6A/7 twisted pair cable up to 70 m
• IR remote control extender
MS-932 SIGNAL PRO 9/32 multiswitch is designed for SMATV SMATV systems.
• 9 inputs (8×SAT, 1×TERR)
• 32 independent subscriber outputs
• Pass-through design (cascadable).
• Very good impedance matching (IRL > 21 dB)
• Open casing
• External 20 V 2.5 A DC power supply with F-connector included
• LED indication at subscriber outputs - easy diagnostics of the installation
• Application in SMATV systems in multi-family buildings.
• Screening class A
• 4 year warranty confirming excellent quality of product
• 32 independent subscriber outputs
• Pass-through design (cascadable).
• Very good impedance matching (IRL > 21 dB)
• Open casing
• External 20 V 2.5 A DC power supply with F-connector included
• LED indication at subscriber outputs - easy diagnostics of the installation
• Application in SMATV systems in multi-family buildings.
• Screening class A
• 4 year warranty confirming excellent quality of product
The SIGNAL PRO MS-508 multiswitch enables distribution of signals from one satellite, terrestrial DVB-T2 and FM/DAB+ radio to 8 terminal outlets.
• 5 inputs (4×SAT, 1×TERR)
• 8 independent subscriber outputs
• Pass-through design (cascadable)
• very good impedance matching (IRL > 21 dB)
• Die-cast housing
• 8 independent subscriber outputs
• Pass-through design (cascadable)
• very good impedance matching (IRL > 21 dB)
• Die-cast housing
MS-916 SIGNAL PRO 9/16 multiswitch is designed for SMATV SMATV systems.
• 9 inputs (8×SAT, 1×TERR)
• 16 independent subscriber outputs
• Pass-through design (cascadable).
• Very good impedance matching (IRL > 21 dB)
• Die-cast housing
• External 20 V 2.5 A DC power supply with F connector included
• LED indication at subscriber outputs - easy diagnostics of the installation
• Application in SMATV systems in multi-family buildings.
• Class A screening
• 4 year warranty confirming excellent quality of product
• 16 independent subscriber outputs
• Pass-through design (cascadable).
• Very good impedance matching (IRL > 21 dB)
• Die-cast housing
• External 20 V 2.5 A DC power supply with F connector included
• LED indication at subscriber outputs - easy diagnostics of the installation
• Application in SMATV systems in multi-family buildings.
• Class A screening
• 4 year warranty confirming excellent quality of product
The MS-924 SIGNAL PRO 9/24 multiswitch is designed for SMATV SMATV systems.
• 9 inputs (8×SAT, 1×TERR)
• 24 independent subscriber outputs
• Pass-through design (cascadable).
• Very good impedance matching (IRL > 21 dB)
• Open casing
• External 20 V 2.5 A DC power supply with F connector included
• LED indication at subscriber outputs - easy diagnostics of the installation
Application in SMATV systems in multi-family buildings.
• Screening class A
• 4 year warranty confirming excellent quality of product
• 24 independent subscriber outputs
• Pass-through design (cascadable).
• Very good impedance matching (IRL > 21 dB)
• Open casing
• External 20 V 2.5 A DC power supply with F connector included
• LED indication at subscriber outputs - easy diagnostics of the installation
Application in SMATV systems in multi-family buildings.
• Screening class A
• 4 year warranty confirming excellent quality of product
The UCH-PRO-1 bracket has been designed for mounting SIGNAL PRO series multiswitches in professional RTV/SAT installations.
• Compatible with SIGNAL PRO series multiswitches without the need for additional adapters
• Easy and quick installation into housings with 4 mm diameter screws
• Two Signal PRO multiswitches have to be mounted using 3 UCH-PRO-1 R69985 brackets
• Stable mounting of devices in tele-technical enclosures
• Optimal design for proper air flow and cooling of equipment
• Easy and quick installation into housings with 4 mm diameter screws
• Two Signal PRO multiswitches have to be mounted using 3 UCH-PRO-1 R69985 brackets
• Stable mounting of devices in tele-technical enclosures
• Optimal design for proper air flow and cooling of equipment
The REC-109 optical receiver enables the conversion of the optical signal from the TR-901 transmitter into an electrical signal. Output type 2xQUATRO + radio/DVB-T2.
• 2xQUATRO + radio/DVB-T2 type output
• Compatible with TR-901 SIGNAL PRO optical transmitter
• Built-in AGC circuit, which ensures signal stability at the output of the device
• Supported wavelengths: 1330-1570 nm
• Conversion of optical signal to full bandwidth 2x SAT IF (VL/VH/HL/HH) in QUATRO system and radio/DVB-T2 signals
• High noise immunity and stable operation over a wide input power range
• High sensitivity for multi-point installations
• SC/APC optical connector
• Compatible with TR-901 SIGNAL PRO optical transmitter
• Built-in AGC circuit, which ensures signal stability at the output of the device
• Supported wavelengths: 1330-1570 nm
• Conversion of optical signal to full bandwidth 2x SAT IF (VL/VH/HL/HH) in QUATRO system and radio/DVB-T2 signals
• High noise immunity and stable operation over a wide input power range
• High sensitivity for multi-point installations
• SC/APC optical connector
SIGNAL PRO optical transmitter TR-501 is used for the transmission of RTV/SAT signals using optical fibre technology. Input type 1xQUATRO + radio/DVB-T2.
• Conversion of DVB-S/S2 (1 satellite position) and radio/DVB-T2 signals
• Input type 1xQUATRO + radio/DVB-T2
• Compatible with QUAD or QUATRO converter
• Output power 4 x +3 dBm
• Connector type SC/APC
• WDM technology (all signals in 1 fibre)
• AGC - automatic gain control stabilising signal level
• LEDs for easy diagnostics
• Single-mode fibre optic transmission
• Maximum signal splitting up to 16 QUATRO REC-105 receivers
• Input type 1xQUATRO + radio/DVB-T2
• Compatible with QUAD or QUATRO converter
• Output power 4 x +3 dBm
• Connector type SC/APC
• WDM technology (all signals in 1 fibre)
• AGC - automatic gain control stabilising signal level
• LEDs for easy diagnostics
• Single-mode fibre optic transmission
• Maximum signal splitting up to 16 QUATRO REC-105 receivers
The TR-901 SIGNAL PRO optical transmitter is used for the transmission of RTV/SAT signals using optical fibre technology. Input type 2xQUATRO + radio/DVB-T2.
• Conversion of DVB-S/S2 (2 satellite positions) and radio/DVB-T2 signals
• Input type: 2xQUATRO + radio/DVB-T2
• Compatible with QUAD and QUATRO LNBs
• Output power: 8 x +5 dBm
• Connector type SC/APC
• WDM technology (all signals in 1 fibre)
• AGC - automatic gain control to stabilise the signal level
• LEDs for easy diagnostics
• Single-mode fibre optic transmission
• Maximum signal splitting up to 16 QUATRO REC-109 receivers
• Input type: 2xQUATRO + radio/DVB-T2
• Compatible with QUAD and QUATRO LNBs
• Output power: 8 x +5 dBm
• Connector type SC/APC
• WDM technology (all signals in 1 fibre)
• AGC - automatic gain control to stabilise the signal level
• LEDs for easy diagnostics
• Single-mode fibre optic transmission
• Maximum signal splitting up to 16 QUATRO REC-109 receivers
The REC-105 optical receiver enables the conversion of the optical signal from the TR-901 transmitter into an electrical signal. Output type 1xQUATRO + radio/DVB-T2.
• Output type 1xQUATRO + radio/DVB-T2
• Compatible with TR-501 SIGNAL PRO optical transmitter
• Built-in AGC circuit, which ensures signal stability at the output of the device
• Supported wavelengths: 1550-1570 nm
• Conversion of optical signal to full band 1x SAT IF (VL/VH/HL/HH) in QUATRO circuit and radio/DVB-T2 signals
• High noise immunity and stable operation over a wide input power range
• High sensitivity for multi-point installations
• SC/APC optical connector
• Compatible with TR-501 SIGNAL PRO optical transmitter
• Built-in AGC circuit, which ensures signal stability at the output of the device
• Supported wavelengths: 1550-1570 nm
• Conversion of optical signal to full band 1x SAT IF (VL/VH/HL/HH) in QUATRO circuit and radio/DVB-T2 signals
• High noise immunity and stable operation over a wide input power range
• High sensitivity for multi-point installations
• SC/APC optical connector
This HDMI male to HDMI male cable allows the connection of HDMI devices (sat receiver, Blu-ray player, computer, game console etc.) to HD-enabled projector, plasma or LCD TV. The cable transmits both digital video and audio, without any loss in quality.
• High quality HDMI v1.4 cable
• Max. video resolution of 4096x2160 pixels
• Two RFI filters
• 2-meter long
• Max. video resolution of 4096x2160 pixels
• Two RFI filters
• 2-meter long
The HDMI Slim cable has small dimensions and reduced minimum bending radius. The use of the cable solves problems such as limited space behind the connected device or dense packing of HDMI inputs, as well can improve the aesthetic qualities of the connection. The cable transmits both digital video a...
• Length: 2 m
• Cable diameter: 4 mm
• Plug width (max): 18 mm
• HDMI specification: v1.4
• Max. video resolution 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• Cable diameter: 4 mm
• Plug width (max): 18 mm
• HDMI specification: v1.4
• Max. video resolution 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
This HDMI male to HDMI male cable allows the connection of HDMI devices (sat receiver, Blu-ray player, computer, game console etc.) to HD-enabled projector, plasma or LCD TV. The cable transmits both digital video and audio, without any loss in quality.
• High quality HDMI cable v1.4
• Two RFI filters
• Length: 3 m (we also offer cables with other lengths)
• Two RFI filters
• Length: 3 m (we also offer cables with other lengths)
Cable designed to connect HD satellite receivers, game consoles and computers to TV sets. The cable transmits both video and audio.
• Length: 3 m
• Cable diameter: 4 mm
• Plug width (max): 18 mm
• HDMI specification: v1.4
• Max. video resolution 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• Cable diameter: 4 mm
• Plug width (max): 18 mm
• HDMI specification: v1.4
• Max. video resolution 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
Cable designed to connect HD satellite receivers, game consoles and computers to TV sets. The cable transmits both video and audio.
• 7m HDMI flat cable
• HDMI v1.4 standard
• Image transmission at a maximum resolution of 4096x2160
• FullHD video transmission
• Vibrant and natural colors through the use of Deep Color function - image transmission in 48 bit
• 3D image transmission
• Reverse audio channel
• Ethernet channel
• HDMI v1.4 standard
• Image transmission at a maximum resolution of 4096x2160
• FullHD video transmission
• Vibrant and natural colors through the use of Deep Color function - image transmission in 48 bit
• 3D image transmission
• Reverse audio channel
• Ethernet channel
Cable designed to connect HD satellite receivers, games consoles and computers to televisions. The cable transmits both video and audio.
• 7 m length
• Supports HDMI 2.0 standard - 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10
• AUDIO return channel
• Ethernet channel
• Supports HDMI 2.0 standard - 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10
• AUDIO return channel
• Ethernet channel
Cable designed to connect HD satellite receivers, game consoles and computers to TV sets. The cable transmits both video and audio.
• 10m HDMI flat cable
• HDMI v1.4 standard
• Image transmission at a maximum resolution of 4096x2160
• FullHD image transmission
• Vibrant and natural colors through the use of Deep Color function - image transmission in 48 bit
• 3D image transmission
• Reverse audio channel
• Ethernet channel
• HDMI v1.4 standard
• Image transmission at a maximum resolution of 4096x2160
• FullHD image transmission
• Vibrant and natural colors through the use of Deep Color function - image transmission in 48 bit
• 3D image transmission
• Reverse audio channel
• Ethernet channel
Cable designed to connect HD satellite receivers, games consoles and computers to televisions. The cable transmits both video and audio.
• 10 m length
• Supports HDMI 2.0 standard - 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10
• AUDIO return channel
• Ethernet channel
• Supports HDMI 2.0 standard - 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10
• AUDIO return channel
• Ethernet channel
Cable designed to connect HD satellite receivers, game consoles and computers to TV sets. The cable transmits both video and audio.
• High quality HDMI cable with v1.4 standard
• Transmits video at a maximum resolution of 4096x2160
• Fitted with anti-interference filters
• Length of 20 m
• FullHD video transmission
• Vibrant and natural colors through the use of Deep Color function - image transmission in 48 bit
• 3D image transmission
• Reverse audio channel
• Ethernet channel
• Transmits video at a maximum resolution of 4096x2160
• Fitted with anti-interference filters
• Length of 20 m
• FullHD video transmission
• Vibrant and natural colors through the use of Deep Color function - image transmission in 48 bit
• 3D image transmission
• Reverse audio channel
• Ethernet channel
The HDMI female to HDMI female adapter (gender changer) allows to connect two typical HDMI cables.
• For connecting two HDMI cables
• High quality
• High quality
Cable with a lenght of 2 m enabling audio/video transmission between devices equipped with a DisplayPort connector.
• Length: 2 m
• Connectors: DP-DP
• Max. resolution: 4K
• Connectors: DP-DP
• Max. resolution: 4K
The attenuator is intended to reduce RF signal level within 5-2400 MHz range in CATV antenna systems.
• Operating frequency range: 5-2400 MHz
• Attenuation: 10 dB
• DC pass-through: 30 V (max 1 A)
• Metal housing
• Connector: F plug, F socket
• Attenuation: 10 dB
• DC pass-through: 30 V (max 1 A)
• Metal housing
• Connector: F plug, F socket
The FAC-1-6 dB TV tapping unit allows the bus signal to be separated in a CATV installation in the 5-1000 MHz band.
• Operating bandwidth 5-1000 MHz
• Spur attenuation 6 dB
• F-type connectors
• Cast aluminium alloy housing
• Spur attenuation 6 dB
• F-type connectors
• Cast aluminium alloy housing
The FAC-1-10 dB TV tapping unit allows the bus signal to be separated in a CATV installation in the 5-1000 MHz band.
• Operating bandwidth 5-1000 MHz
• Spur attenuation 10 dB
• F-type connectors
• Cast aluminium alloy housing
• Spur attenuation 10 dB
• F-type connectors
• Cast aluminium alloy housing
The ST-7990 4×HDMI modulator – 4×COFDM (DVB-T)/4×QAM (DVB-C) enables the conversion of signals from four HDMI sources to 4 DVB-T/C MUX-es.
• Digital four-channel DVB-T/C modulator
• Capable of connecting four HDMI signal sources and modulating them into four digital DVB-T/C multiplexes
• Proven HDMI-DVB-T/C modulator in many installations
• Converts signal from any HDMI source
• High quality digital signal in HD/SD standard
• Ideal for collective TV installations, hotels, RTV shops, galleries, pubs, etc.
• Easy installation, intuitive configuration
• Capable of connecting four HDMI signal sources and modulating them into four digital DVB-T/C multiplexes
• Proven HDMI-DVB-T/C modulator in many installations
• Converts signal from any HDMI source
• High quality digital signal in HD/SD standard
• Ideal for collective TV installations, hotels, RTV shops, galleries, pubs, etc.
• Easy installation, intuitive configuration
This HDMI male to HDMI male cable allows the connection of HDMI devices (sat receiver, Blu-ray player, computer, game console etc.) to HD-enabled projector, plasma or LCD TV. The cable transmits both digital video and audio, without any loss in quality.
• Length: 0.5 m
• AWG: 28 (0.321 mm)
• HDMI specification: v1.4
• Max. video resolution 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• AWG: 28 (0.321 mm)
• HDMI specification: v1.4
• Max. video resolution 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
The HDMI Slim cable has small dimensions and reduced minimum bending radius. The use of the cable solves problems such as limited space behind the connected device or dense packing of HDMI inputs, as well can improve the aesthetic qualities of the connection. The cable transmits both digital video a...
• Length: 0.5 m
• Cable diameter: 4 mm
• Plug width (max): 18 mm
• HDMI specification: v1.4
• Max. video resolution ///4096x2160///
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• Cable diameter: 4 mm
• Plug width (max): 18 mm
• HDMI specification: v1.4
• Max. video resolution ///4096x2160///
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
This HDMI male to HDMI male cable allows the connection of HDMI devices (sat receiver, Blu-ray player, computer, game console etc.) to HD-enabled projector, plasma or LCD TV. The cable transmits both digital video and audio, without any loss in quality.
• High quality HDMI cable 1.4 standard compatible
• Max. video resolution 4096x2160
• Two filters
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• Max. video resolution 4096x2160
• Two filters
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
The HDMI Slim cable has small dimensions and reduced minimum bending radius. The use of the cable solves problems such as limited space behind the connected device or dense packing of HDMI inputs, as well can improve the aesthetic qualities of the connection. The cable transmits both digital video a...
• Length: 1 m
• Cable diameter: 4 mm
• Plug width (max): 18 mm
• HDMI specification: v1.4
• Max. video resolution ///4096x2160///
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• Cable diameter: 4 mm
• Plug width (max): 18 mm
• HDMI specification: v1.4
• Max. video resolution ///4096x2160///
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
This HDMI male to HDMI male cable allows the connection of HDMI devices (sat receiver, Blu-ray player, computer, game console etc.) to HD-enabled projector, plasma or LCD TV. The cable transmits both digital video and audio, without any loss in quality.
• Flat cable, length of 2 m
• HDMI specification v1.4
• Max. video resolution of 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• HDMI specification v1.4
• Max. video resolution of 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
Cable designed to connect HD satellite receivers, game consoles and computers to TV sets. The cable transmits both video and audio.
• Flat cable, length of 3 m
• HDMI specification v1.4
• Max. video resolution of 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• HDMI specification v1.4
• Max. video resolution of 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
Cable designed to connect HD satellite receivers, game consoles and computers to TV sets. The cable transmits both video and audio.
• High quality HDMI cable with v1.4 standard
• Transmits video at a maximum resolution of 4096x2160
• Fitted with anti-interference filters
• Length of 5 m
• FullHD video transmission
• Vibrant and natural colors through the use of Deep Color function - image transmission in 48 bit
• 3D image transmission
• Reverse audio channel
• Ethernet channel
• Transmits video at a maximum resolution of 4096x2160
• Fitted with anti-interference filters
• Length of 5 m
• FullHD video transmission
• Vibrant and natural colors through the use of Deep Color function - image transmission in 48 bit
• 3D image transmission
• Reverse audio channel
• Ethernet channel
Cable designed to connect HD satellite receivers, game consoles and computers to TV sets. The cable transmits both video and audio.
• Flat cable, length of 5 m
• HDMI specification v1.4
• Max. video resolution of 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• HDMI specification v1.4
• Max. video resolution of 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
Cable designed to connect HD satellite receivers, games consoles and computers to televisions. The cable transmits both video and audio.
• Length 5 m
• Supports HDMI 2.0 standard - 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10
• AUDIO return channel
• Ethernet channel
• Supports HDMI 2.0 standard - 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10
• AUDIO return channel
• Ethernet channel
Cable designed to connect HD satellite receivers, game consoles and computers to TV sets. The cable transmits both video and audio.
• Length: 10 m
• AWG: 28 (0.321 mm)
• Two filters
• HDMI specification: v1.4
• Max. video resolution: 4096x2160
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• AWG: 28 (0.321 mm)
• Two filters
• HDMI specification: v1.4
• Max. video resolution: 4096x2160
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
Cable designed to connect HD satellite receivers, game consoles and computers to TV sets. The cable transmits both video and audio.
• High quality HDMI cable with v1.4 standard
• Transmits video at a maximum resolution of 4096x2160
• Fitted with anti-interference filters
• Length of 15 m
• FullHD video transmission
• Vibrant and natural colors through the use of Deep Color function - image transmission in 48 bit
• 3D image transmission
• Reverse audio channel
• Ethernet channel
• Transmits video at a maximum resolution of 4096x2160
• Fitted with anti-interference filters
• Length of 15 m
• FullHD video transmission
• Vibrant and natural colors through the use of Deep Color function - image transmission in 48 bit
• 3D image transmission
• Reverse audio channel
• Ethernet channel
The cable is designed to connect HD satellite receivers, game consoles and computers to TVs. The cable transmits both video and sound.
• Length: 30 m
• Support for HDMI 2.0 – 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10
• AUDIO return channel
• Ethernet channel
• High flexibility
• Support for HDMI 2.0 – 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10
• AUDIO return channel
• Ethernet channel
• High flexibility
Cable designed to connect HD satellite receivers, game consoles and computers to TV sets. The cable transmits both video and audio.
• Length: 50 m
• Support for HDMI 2.0 – 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10, HDCP 2.2
• AUDIO return channel
• Ethernet channel
• High flexibility
• Support for HDMI 2.0 – 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10, HDCP 2.2
• AUDIO return channel
• Ethernet channel
• High flexibility
Cable designed to connect HD satellite receivers, game consoles and computers to TV sets. The cable transmits both video and audio.
• Length: 70 m
• Support for HDMI 2.0 – 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10
• AUDIO return channel
• Ethernet channel
• High flexibility
• Support for HDMI 2.0 – 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10
• AUDIO return channel
• Ethernet channel
• High flexibility
The HDMI plug to HDMI socket adapter is used to connect the signal cable to the HDMI receiver (transmitter).
• Possibility to change the angle (180º) between inlet and outlet
• Ideal for connecting devices in hard-to-reach places
• Ideal for connecting devices in hard-to-reach places
Cable with a lenght of 2m for audio/video transmission between DisplayPort and HDMI devices.
• Length: 2 m
• Connectors: DisplayPort - HDMI
• Connectors: DisplayPort - HDMI
The converter allows for transmission of HDMI signal over longer distances via minimum cat. 6 twisted pair cable. A USB control extension is provided.
• Transmission via a single cat 6 cable
• Video mode 1080p
• Range over CAT 6 cable up to 70 m
• USB extender
• Video mode 1080p
• Range over CAT 6 cable up to 70 m
• USB extender
The converter enables HDMI (4K) signals to be transmitted using CAT5 or higher twisted-pair cables. The device is equipped with an IR extender.
• Transmission via a single Cat. 6/6A/7 cable
• Data transmission rate of up to 18 Gbps
• 4K x 2K 60 Hz picture mode
• Range over CAT 6/6A/7 up to 60 m - 4K x 2K 30 Hz
• Range over twisted pair cable 6/6A/7 up to 30 m - 4K x 2K 60 Hz
• IR remote control extender
• Data transmission rate of up to 18 Gbps
• 4K x 2K 60 Hz picture mode
• Range over CAT 6/6A/7 up to 60 m - 4K x 2K 30 Hz
• Range over twisted pair cable 6/6A/7 up to 30 m - 4K x 2K 60 Hz
• IR remote control extender
The WS-8901U modulator enables conversion of audio/video signal fed to HDMI/CVBS to DVB-T COFDM standard. Mounting in a 19" rack.
• Single channel DVB-T modulator for RACK rack
• H.264 codec compression and maximum bitrate of 20 Mbit/s
• Conversion of signal from any HDMI source
• High quality digital signal of HD standard
• Ideal for SMATV systems, hotels, TV stores, galleries, pubs, etc.
• Easy installation, intuitive configuration.
• H.264 codec compression and maximum bitrate of 20 Mbit/s
• Conversion of signal from any HDMI source
• High quality digital signal of HD standard
• Ideal for SMATV systems, hotels, TV stores, galleries, pubs, etc.
• Easy installation, intuitive configuration.
Signal WS-6990 modulator allows you to convert the signal from a single RCA/HDMI source to the DVB-T/C standard.
• Digital single-channel DVB-T/C modulator
• Adjustable bitrate from 1...20 Mbps or Auto function
• Can connect one HDMI source and modulate it to a DVB-T or DVB-C or ISDB-T multiplex
• Proven in many installations HDMI-DVB-T/C modulator
• Converts signal from any HDMI source
• High quality digital signal in HD/SD standard
• Ideal for collective TV installations, hotels, RTV shops, galleries, pubs, etc.
• Easy installation, intuitive configuration
• Adjustable bitrate from 1...20 Mbps or Auto function
• Can connect one HDMI source and modulate it to a DVB-T or DVB-C or ISDB-T multiplex
• Proven in many installations HDMI-DVB-T/C modulator
• Converts signal from any HDMI source
• High quality digital signal in HD/SD standard
• Ideal for collective TV installations, hotels, RTV shops, galleries, pubs, etc.
• Easy installation, intuitive configuration
Modulator ST-7992 2×HDMI – 2×COFDM (DVB-T)/ 2×QAM(DVB-C) enables the conversion of signals from two HDMI sources to 2 DVB-T/C MUX-es.
• Digital dual channel DVB-T/C modulator
• Capable of connecting two HDMI signal sources and modulating them into two digital DVB-T/C multiplexes
• Proven in many installations HDMI-DVB-T/C modulator
• Converts signal from any HDMI source
• High quality digital signal in HD/SD standard
• Ideal for collective TV installations, hotels, RTV shops, galleries, pubs, etc.
• Easy installation, intuitive configuration
• Capable of connecting two HDMI signal sources and modulating them into two digital DVB-T/C multiplexes
• Proven in many installations HDMI-DVB-T/C modulator
• Converts signal from any HDMI source
• High quality digital signal in HD/SD standard
• Ideal for collective TV installations, hotels, RTV shops, galleries, pubs, etc.
• Easy installation, intuitive configuration
3U voltage distribution panel with DIN rail, for mounting S-type electrical modules and other modular equipment components.
• Height: 3U
• DIN rail
• Possible to install up to 23 "S" type modules
• DIN rail
• Possible to install up to 23 "S" type modules
The TZU 22 DVB-T Finder signal meter is designed for individual setting of terrestrial antennas.
• Frequency range 47-862 MHz
• Power supply via 5 V tuner
• External power supply 5-12 V
• Power consumption 25 mA
• Input connector "F"
• Output connector "F"
• Power connector 3.5 mm jack
• Range of measured levels 50-80 dB
• Power supply via 5 V tuner
• External power supply 5-12 V
• Power consumption 25 mA
• Input connector "F"
• Output connector "F"
• Power connector 3.5 mm jack
• Range of measured levels 50-80 dB
Power adapter with 5 VDC voltage and 2 A current output, equipped with USB type A connector.
• Output voltage 5 VDC
• Output current 2 A
• USB type A port
• Color: black
• Output current 2 A
• USB type A port
• Color: black
The AS07STCA-4K certified signal meter can measure DVB-S/DVB-S2 (4K) satellite signal, DVB-T/T2 (4K) terrestrial TV signal in HEVC 10 Bit compression and C/J.83B/ISDB-T cable signal.
• Measurement of DVB-T/T2/C/J.83B/ISDB-T and DVB-S/S2 signals
• DVB-T2 support with H.265/HEVC 10 bit
• Built-in video decoder: MPEG-2/H.264/HEVC(H.265) 4K
• Certified calibration
• Measurement of all necessary signal parameters such as signal level expressed in dBμV, CBER, VBER
• Measurement of necessary parameters for digital signal: MER, Link Margin
• Measurement of DVB-S/S2 signals simultaneously from two satellite positions for each of the 8 polarisation/band pairs
• Measurement export to .csv file
• RF signal measurement in the range 20...100 dBμV
• Real-time signal spectrum analyser to detect interference from LTE signals
• Menu in Polish, English, Italian, Spanish, Portuguese, Czech, German, Arabic
• USB interface (possibility of taking a screenshot of the current signal measurement)
• Viewing of the received channel on a 7" TFT-LCD touch-screen display with high 4K resolution
• DiSEqC support: 1.0, 1.1,1.2, 0/22 kHz Tone, Unicable (dSCR), Wideband
• Constellation chart
• Large Li-On 7.4 V/7000 mAh battery - sufficient for approx. 3-4 h of continuous operation
• Efficient and easy-to-use user interface
• DVB-T2 support with H.265/HEVC 10 bit
• Built-in video decoder: MPEG-2/H.264/HEVC(H.265) 4K
• Certified calibration
• Measurement of all necessary signal parameters such as signal level expressed in dBμV, CBER, VBER
• Measurement of necessary parameters for digital signal: MER, Link Margin
• Measurement of DVB-S/S2 signals simultaneously from two satellite positions for each of the 8 polarisation/band pairs
• Measurement export to .csv file
• RF signal measurement in the range 20...100 dBμV
• Real-time signal spectrum analyser to detect interference from LTE signals
• Menu in Polish, English, Italian, Spanish, Portuguese, Czech, German, Arabic
• USB interface (possibility of taking a screenshot of the current signal measurement)
• Viewing of the received channel on a 7" TFT-LCD touch-screen display with high 4K resolution
• DiSEqC support: 1.0, 1.1,1.2, 0/22 kHz Tone, Unicable (dSCR), Wideband
• Constellation chart
• Large Li-On 7.4 V/7000 mAh battery - sufficient for approx. 3-4 h of continuous operation
• Efficient and easy-to-use user interface
