EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
This section includes devices and equipment intended for making installations in which the signal source is the terrestrial TV and DVB-T and satellite TV. The offered products include, among others: TV and radio antennas, satellite dishes, coaxial cables, amplifiers and multiswitches, which can be used for both, individual and SMATV systems in residential buildings, hotels, commercial buildings, etc.
Antenna installers will find professional DVB-T2 and DVB-S2 signal meters here. The distribution of DVB-T2 terrestrial and satellite television signals in hotels and commercial buildings requires dedicated headend panels and digital modulators. The offer also includes IPTV station panels.
The offer is complemented by devices for transmission of HDMI signals, connectors, splitters, antenna splitters, TV/SAT and multimedia connectors.
Antenna installers will find professional DVB-T2 and DVB-S2 signal meters here. The distribution of DVB-T2 terrestrial and satellite television signals in hotels and commercial buildings requires dedicated headend panels and digital modulators. The offer also includes IPTV station panels.
The offer is complemented by devices for transmission of HDMI signals, connectors, splitters, antenna splitters, TV/SAT and multimedia connectors.
The ASP-8W LUX broadband antenna with LNA-177 amplifier receives DVB-T/T2 TV signals in the VHF and UHF bands in horizontal polarization.
• Performs in densely built-up areas
• Gain up to 14 dBi
• Built-in LNA-177 30 dB amplifier
• UHF and VHF bands
• Wide half power angle
• Power supply included
• Gain up to 14 dBi
• Built-in LNA-177 30 dB amplifier
• UHF and VHF bands
• Wide half power angle
• Power supply included
The broadband antenna is made of aluminum, with structural elements (U-bolt, nuts, washers) of electro-galvanized steel. It can be used without a mast (e.g. placed on a window sill).
• Suitable for densely built-up areas
• Gain of up to 14 dBi
• UHF and VHF bands
• Wide half power angle
• Gain of up to 14 dBi
• UHF and VHF bands
• Wide half power angle
The ASP-8 PM broadband antenna with symmetrizer receives DVB-T/T2 TV signals in the VHF band (horizontal/vertical polarization) and UHF band (horizontal polarization)
• Suitable for densely built-up areas
• Gain of up to 14 dBi
• UHF and VHF bands (horizontal polarisation)
• VHF in addition in vertical polarisation
• Wide half power angle
• Gain of up to 14 dBi
• UHF and VHF bands (horizontal polarisation)
• VHF in addition in vertical polarisation
• Wide half power angle
DIPOL-1/5-12 A0110 is a professional, 1-element antenna designed for reception of digital TV (DVB-T: channels 5-12, 174-230 MHz) and radio (DAB/DAB+) broadcasts. Due to its pattern and 2 dBi gain, the antenna is perfect for urban areas with DVB-T/T2 and DAB transmitters. The versatile design of the ...
• Antenna designed for reception of digital TV multiplexes (DVB-T: channels 5-12) and radio broadcasts (DAB, DAB+)
• Operation band: 170-230 MHz
• Directional characteristics
• Vertical or horizontal polarization (depending on mounting position)
• 2 dBi gain
• Operation band: 170-230 MHz
• Directional characteristics
• Vertical or horizontal polarization (depending on mounting position)
• 2 dBi gain
DIPOL-4/5-12 is a four-element antenna designed for the reception of DVB-T/T2 digital television signals and DAB radio signals broadcast in the VHF band.
• Band 170 - 230 MHz (VHF)
• Gain max. 6 dBi
• V polarisation (can be turned to H polarisation)
• Directional radiation pattern
• Number of elements: 4
• Gain max. 6 dBi
• V polarisation (can be turned to H polarisation)
• Directional radiation pattern
• Number of elements: 4
DIPOL 1 RZ B is a single-element antenna designed to receive FM radio signals in horizontal H or vertical V polarisation.
• Band 88 - 108 MHz (FM)
• Gain max. 0 dBi
• H/V polarisation
• Number of elements: 1
• Gain max. 0 dBi
• H/V polarisation
• Number of elements: 1
DIPOL 1/RUZ B is an omnidirectional antenna designed to receive FM radio signals in horizontal H polarisation.
• Band 88 - 108 MHz (FM)
• Gain max. 0 dBi
• Polarisation H
• Number of elements: 1
• Gain max. 0 dBi
• Polarisation H
• Number of elements: 1
DIPOL 1/RUZ/PM is an omnidirectional antenna designed to receive FM radio signals in horizontal H and vertical V polarisation.
• Band 88 - 108 MHz (FM)
• Gain max. 0 dBi
• Polarisation H, V
• Number of elements: 1
• Gain max. 0 dBi
• Polarisation H, V
• Number of elements: 1
FM antenna (88-108 MHz) with dual polarization (H+V), packed in foil. Aluminum active part, electro-galvanized steel structural components. The set includes matching transformer (balun).
• Band 88 - 108 MHz (FM)
• Gain max. -1 dBi
• H, V polarisation
• Number of elements: 1
• Gain max. -1 dBi
• H, V polarisation
• Number of elements: 1
The SV TOTAL-FM is a single-element antenna designed to receive FM radio signals in horizontal H or vertical V polarisation.
• Band 88 - 108 MHz (FM)
• Gain max. 0 dBi
• V/H polarisation
• Number of elements: 1
• Gain max. 0 dBi
• V/H polarisation
• Number of elements: 1
The SV TOTAL-FM with 20 dB amplifier is a single-element antenna designed for the reception of FM radio signals in horizontal H or vertical V polarisation.
• Band 88 - 108 MHz (FM)
• Gain max. 0 dBi
• Built-in 20 dB amplifier
• V/H polarisation
• Number of elements: 1
• Gain max. 0 dBi
• Built-in 20 dB amplifier
• V/H polarisation
• Number of elements: 1
SONUS-FM is an indoor radio antenna with an 18 dB amplifier.
• Band 88 - 108 MHz (FM)
• Built-in 18 dB amplifier
• H/V polarization
• Number of elements: 1
• Power supply included
• Built-in 18 dB amplifier
• H/V polarization
• Number of elements: 1
• Power supply included
Broadband TV antenna with amplifier 40 dB powered from USB port.
• TV antenna, broadband
• Amplification up to 40 dB with steeples adjustment
• Output impedance: 75 Ohm
• USB supply: 5V/25 mA
• Amplification up to 40 dB with steeples adjustment
• Output impedance: 75 Ohm
• USB supply: 5V/25 mA
SONUS-TV is a room TV antenna with a 40 dB amplifier.
• Band 174 - 862 MHz (VHF, UHF)
• Built-in 40 dB amplifier
• H/V polarisation
• Number of elements: 1
• Power supply included
• Built-in 40 dB amplifier
• H/V polarisation
• Number of elements: 1
• Power supply included
DIPOL 3 RZ FM B is a 3-element antenna designed to receive FM radio signals in horizontal H or vertical V polarization.
• Frequency range 88-108 MHz (FM)
• Max gain. 5 dBi
• H/V polarization
• Directional radiation pattern
• Number of elements: 3
• Max gain. 5 dBi
• H/V polarization
• Directional radiation pattern
• Number of elements: 3
DIPOL-7/5-12 is a seven-element antenna designed to receive DVB-T/T2 digital television signals and DAB radio signals broadcast in the VHF band.
• Band 170 - 230 MHz (VHF)
• Gain max. 7 dBi
• H/V polarisation
• Directional radiation pattern
• Number of elements: 7
• Gain max. 7 dBi
• H/V polarisation
• Directional radiation pattern
• Number of elements: 7
The DIPOL-11/6-12 is an 11-element antenna designed for the reception of DVB-T/T2 digital television signals or DAB radio signals broadcast in the VHF band.
• Band: 170 - 230 MHz (VHF)
• Max. gain: 9 dBi
• Polarisation: H/V
• Directional characteristics
• Number of elements: 11
• Max. gain: 9 dBi
• Polarisation: H/V
• Directional characteristics
• Number of elements: 11
The DIPOL 15/5-12/21-60 DVB-T A1515 professional DVB-T/T2 antenna set has been designed for reception of TV broadcasts in VHF (174-230 MHz) and UHF (470-790 MHz) bands. Thanks to a universal construction, the VHF and UHF antenna segments can be set to the vertical (V) or horizontal (H) polarization ...
• Combo antenna - reception of all TV bands
• Band 170 - 230 MHz (VHF), 470 - 694 (UHF)
• Profit max. 11 dBi (UHF), 4 dBi (VHF)
• H/V polarization - for both bands
• Directional radiation pattern
• Number of elements: 15
• Band 170 - 230 MHz (VHF), 470 - 694 (UHF)
• Profit max. 11 dBi (UHF), 4 dBi (VHF)
• H/V polarization - for both bands
• Directional radiation pattern
• Number of elements: 15
DIPOL 19/21-60 tube is a 19-element antenna designed for reception of digital DVB-T/T2 television signals in UHF band in horizontal H polarization.
• Band: 470 - 694 MHz (UHF)
• Gain max. 14 dBi
• H polarization
• Directional radiation pattern
• Possible to use LNA repeater
• Number of elements: 19
• Gain max. 14 dBi
• H polarization
• Directional radiation pattern
• Possible to use LNA repeater
• Number of elements: 19
DIPOL 19/21-60 DIGITAL is a 19-element antenna designed for reception of digital DVB-T/T2 television signals in UHF band in horizontal H polarization.
• Band 470 - 694 MHz (UHF)
• Gain max. 14 dBi
• H polarisation
• Directional radiation pattern
• Number of elements: 19
• Gain max. 14 dBi
• H polarisation
• Directional radiation pattern
• Number of elements: 19
DIPOL SMART CITY is a directional TV antenna designed to receive digital terrestrial television DVB-T2 in UHF band. It is designed for smaller systems.
• DVB-T2 reception on channels 21 - 48 (470 - 694 MHz).
• Operation in "passive" or "active" mode
• Gain max: 12 dBi (UHF).
• Gain: 24.7 dB (UHF)
• 2 mounting versions: "full" and "compact"
• Hermetic box with F-type connector
• Made of aluminium and ABS
• Reinforced main profile
• Tool-free installation in 3 minutes
• Built-in LTE 700 filter
• Operation in "passive" or "active" mode
• Gain max: 12 dBi (UHF).
• Gain: 24.7 dB (UHF)
• 2 mounting versions: "full" and "compact"
• Hermetic box with F-type connector
• Made of aluminium and ABS
• Reinforced main profile
• Tool-free installation in 3 minutes
• Built-in LTE 700 filter
The DVB-T2 TV antenna DIPOL SMART CITY COMBO A2050 is a directional antenna, suitable for receiving DVB-T2 digital terrestrial television in the VHF (174-230 MHz) and UHF (470-694 MHz) bands. Built-in antenna amplifier with a bypass.
• Combo antenna: reception of all TV bands
• Band: 170 - 230 MHz (VHF), 470 - 694 (UHF)
• Max. gain: 12 dBi (UHF) and 4.9 dBi (VHF)
• Gain + amplification: 23.6 dB (VHF) and 24.7 dBi (UHF)
• Polarization: H/V - for both bands
• Directional radiation pattern
• Number of elements: 13
• Band: 170 - 230 MHz (VHF), 470 - 694 (UHF)
• Max. gain: 12 dBi (UHF) and 4.9 dBi (VHF)
• Gain + amplification: 23.6 dB (VHF) and 24.7 dBi (UHF)
• Polarization: H/V - for both bands
• Directional radiation pattern
• Number of elements: 13
DIPOL DVB-T2 Y3 PASSIVE COMBO is a directional antenna designed to receive digital terrestrial television DVB-T2 in the VHF band (174-230 MHz) and UHF band (470-694 MHz).
• Compact dimensions
• Designed to receive DVB-T2 terrestrial TV signals in the VHF and UHF bands
• Directional characteristics
• Made of aluminium and ABS
• Reinforced main profile
• Hermetic box with F-type connector
• Tool free installation in 2 minutes
• Built-in LTE 700 filter
• Application in individual and collective installations
• Designed to receive DVB-T2 terrestrial TV signals in the VHF and UHF bands
• Directional characteristics
• Made of aluminium and ABS
• Reinforced main profile
• Hermetic box with F-type connector
• Tool free installation in 2 minutes
• Built-in LTE 700 filter
• Application in individual and collective installations
DIPOL SMART HORIZON is a directional TV antenna designed to receive digital terrestrial television DVB-T2 in UHF band. It is intended for individual and SMATV systems.
• DVB-T2 reception on channels 21 - 48 (470 - 694 MHz)
• Operation in "passive" or "active" mode
• Gain max: 14 dBi (UHF)
• Gain + gain: 26.2 dB (UHF)
• Hermetic box with F-type connector
• Tool-less assembly in 1.5 minutes
• Made of aluminium and ABS
• Reinforced main profile
• Built-in LTE 700 filter
• Application in individual as well as collective installations
• Operation in "passive" or "active" mode
• Gain max: 14 dBi (UHF)
• Gain + gain: 26.2 dB (UHF)
• Hermetic box with F-type connector
• Tool-less assembly in 1.5 minutes
• Made of aluminium and ABS
• Reinforced main profile
• Built-in LTE 700 filter
• Application in individual as well as collective installations
The DVB-T2 DIPOL SMART HORIZON COMBO TV antenna is designed to receive DVB-T2 digital terrestrial television in the VHF and UHF bands. The bypass allows it to operate in two modes – passive and active.
• Combo antenna: reception of all TV bands
• Band: 170 - 230 MHz (VHF), 470 - 694 (UHF)
• Max. gain: 14 dBi (UHF) and 5.7 dBi (VHF)
• Gain + amplification: 26.2 dBi (UHF) and 23.8 dBi (VHF)
• H/V polarization: for both bands
• Directional radiation pattern
• Number of elements: 28
• Band: 170 - 230 MHz (VHF), 470 - 694 (UHF)
• Max. gain: 14 dBi (UHF) and 5.7 dBi (VHF)
• Gain + amplification: 26.2 dBi (UHF) and 23.8 dBi (VHF)
• H/V polarization: for both bands
• Directional radiation pattern
• Number of elements: 28
DIPOL 17/21-69 Tri-Digit MINI is a directional UHF antenna optimized for reception of DVB-T/T2 digital terrestrial television. The antenna gain is 14 dBi.
• Band: 470 - 694 MHz (UHF)
• Gain max. 14 dBi
• H polarization
• Only 0.6 m long
• Directional radiation pattern
• Supports LNA repeaters
• Number of elements: 19
• Gain max. 14 dBi
• H polarization
• Only 0.6 m long
• Directional radiation pattern
• Supports LNA repeaters
• Number of elements: 19
Tri Digit is a 44-element antenna suitable for receiving DVB-T/T2 terrestrial television in the UHF band.
• Band 470 - 694 MHz (UHF)
• Gain max. 16,8 dBi
• H polarisation
• Directional radiation pattern
• Possibility to use an amplifier type LNA
• Number of elements: 44
• Gain max. 16,8 dBi
• H polarisation
• Directional radiation pattern
• Possibility to use an amplifier type LNA
• Number of elements: 44
Tri Digit with LNA177-5G amplifier is a 44-element antenna suitable for receiving DVB-T/T2 terrestrial television in the UHF band.
• Band 470 - 694 MHz (UHF)
• Gain max. 16.8 dBi
• Built-in LNA177-5G 27 dB amplifier
• H polarisation
• Directional radiation pattern
• Number of elements: 44
• Gain max. 16.8 dBi
• Built-in LNA177-5G 27 dB amplifier
• H polarisation
• Directional radiation pattern
• Number of elements: 44
The antenna with H/V polarization Dipol 28/5-12/21-60 (28 elements) with LNA-101 amplifier is designed to receive DVB-T/T2 digital terrestrial television in VHF and UHF bands.
• Combo antenna - reception of all TV bands
• Band 170 - 230 MHz (VHF), 470 - 694 (UHF)
• Gain max. 14 dBi (UHF), 7 dBi (VHF)
• H/V polarisation for both bands
• Directional radiation pattern
• Number of elements: 28
• Band 170 - 230 MHz (VHF), 470 - 694 (UHF)
• Gain max. 14 dBi (UHF), 7 dBi (VHF)
• H/V polarisation for both bands
• Directional radiation pattern
• Number of elements: 28
The antenna with H/V polarization Dipol 28/5-12/21-48 (28 elements) with LNA-169 amplifier is designed to receive DVB-T/T2 digital terrestrial television in VHF and UHF bands.
• Combo antenna – reception of all TV bands
• 170-230 MHz (VHF), 470-694 (UHF) bands
• Gain max. 14 dBi (UHF), 7 dBi (VHF)
• Built-in 24 dB LNA-169 5G amplifier in UHF part
• H/V polarization for both bands
• Directional radiation pattern
• Number of elements: 28
• 170-230 MHz (VHF), 470-694 (UHF) bands
• Gain max. 14 dBi (UHF), 7 dBi (VHF)
• Built-in 24 dB LNA-169 5G amplifier in UHF part
• H/V polarization for both bands
• Directional radiation pattern
• Number of elements: 28
The logarithmic antenna is a modern broadband, dual-polarization antenna dedicated to receiving DVB-T/T2 digital terrestrial television in the VHF and UHF bands.
• Band 174 - 230 MHz (VHF) and 470 - 790 MHz (UHF)
• Gain max. 8 dBi (VHF), 9 dBi (UHF)
• H polarisation for UHF band
• H/V polarisation for VHF band
• Directional beam patterns
• Impedance 75 Ω - no need to use symmetrizer
• Gain max. 8 dBi (VHF), 9 dBi (UHF)
• H polarisation for UHF band
• H/V polarisation for VHF band
• Directional beam patterns
• Impedance 75 Ω - no need to use symmetrizer
The DVB-T/T2 5-12/21-60 television antenna is designed for indoor and outdoor use, for receiving DVB-T/T2 digital terrestrial television in the VHF and UHF bands.
• Band 174 - 790 MHz (VHF, UHF)
• Built-in 30 dB amplifier
• H/V polarisation
• Power supply included
• Built-in 30 dB amplifier
• H/V polarisation
• Power supply included
The Digit Activa 5G Protected A6080 DVB-T/T2 antenna has been designed to receive DVB-T signals in VHF (174-230 MHz) and UHF (470-790 MHz) bands. The built-in amplifier increases signal levels only in the UHF band. The compact antenna can be used in areas with decent signal levels. It can be mounted...
• Reception frequency range (MHz): 470–694 (UHF) and 174–230 MHz (VHF)
• Gain: 4.5 dBi
• 22 dB UHF amplifier
• H polarisation
• 5G filter to prevent signal interference caused by mobile phone masts
• Power supply included
• Gain: 4.5 dBi
• 22 dB UHF amplifier
• H polarisation
• 5G filter to prevent signal interference caused by mobile phone masts
• Power supply included
Antenna symmetrizer C0001, channels 1-12+UKF
• Input channels 1-12
• Input impedance: 300Ω
• Output impedance: 75Ω
• Ampedance < 1.5 dB
• Input impedance: 300Ω
• Output impedance: 75Ω
• Ampedance < 1.5 dB
Antenna symmetrizer C0002, channels 21-48 (printed)
• Input channels 21-48
• Input impedance: 300Ω
• Output impedance: 75Ω
• Ampedance < 1.5 dB
• Input impedance: 300Ω
• Output impedance: 75Ω
• Ampedance < 1.5 dB
Antenna balun C0003, channels 6-48
• Input channels 6-48
• Input impedance: 300Ω
• Output impedance: 75Ω
• Attenuation < 1.5 dB
• Input impedance: 300Ω
• Output impedance: 75Ω
• Attenuation < 1.5 dB
Antenna symmetrizer C0005, channels 1-60, F connector
• Input channels 1-60
• Input impedance: 300Ω
• Output impedance: 75Ω
• Attenuation < 1.5 dB
• F connector
• Input impedance: 300Ω
• Output impedance: 75Ω
• Attenuation < 1.5 dB
• F connector
Antenna impedance transformer C0006, channels 21-48, F-connector
• Input channels 21-48
• Input impedance: 300 Ohm
• Output impedance: 75 Ohm
• Attenuation < 1.5 dB
• F connector
• Input impedance: 300 Ohm
• Output impedance: 75 Ohm
• Attenuation < 1.5 dB
• F connector
The E9315 antenna box is used for DIPOL antennas. It protects a balun or preamplifier placed inside.
• Designed for DIPOL antennas
• Material PVC
• Black colour
• Material PVC
• Black colour
Satellite dish, offset antenna galvanized painted, 80 cm, designed for use in small systems.
• Size: 80 cm
• Material: steel
• Resistant to strong winds
• Max. gain 38.5 dBi
• Material: steel
• Resistant to strong winds
• Max. gain 38.5 dBi
• High quality and resistance to weather conditions
• Durable construction
• New reinforced mount
• Wide range of azimuth-elevation adjustment
• Durable construction
• New reinforced mount
• Wide range of azimuth-elevation adjustment
Bright offset galvanised painted satellite dish, 90 cm, designed for small installation applications.
• Size: 90 cm
• Material: steel
• Resistant to strong winds
• Gain max. 41.2 dBi
• Material: steel
• Resistant to strong winds
• Gain max. 41.2 dBi
![80 cm steel satellite dish FAMAVAL 80 SP 30 [white]](https://www.dipol.com.pl/img/thumbnails/a9653+.jpg/5076992517844c959397a6d15041a529.jpg)
An 80 cm offset steel satellite dish designed to receive satellite signals.
• Dimension: 80 cm
• Material: steel
• Wind-proof construction
• Max. gain: 38,3 dBi
• Material: steel
• Wind-proof construction
• Max. gain: 38,3 dBi
![Steel Satellite Dish: FAMAVAL 80 SP 30 [dark]](https://www.dipol.com.pl/img/thumbnails/a9654+.jpg/9ad0dd50d167901fef7ad9c76097e667.jpg)
Satellite dish, offset 80 cm, graphite, designed to receive satellite signals from one or two satellites (multifeed configuration).
• Size: 80 cm
• Material: steel
• Resistant to strong winds
• Max. gain 38.3 dBi
• Material: steel
• Resistant to strong winds
• Max. gain 38.3 dBi
![Steel Satellite Dish: TRX-EL 90 FAMAVAL (90 cm) [graphite]](https://www.dipol.com.pl/img/thumbnails/a9655+.jpg/2afe52cbc3efd4c4eb547aae52b248d3.jpg)
The FAMAVAL 90 TRX-EL steel satellite dish (dimensions 90.5 cm 83.4 cm) offers excellent signal reception.
• Size: 90 cm
• Material: steel
• Resistant to strong winds
• Max. gain 38,7 dBi
• Material: steel
• Resistant to strong winds
• Max. gain 38,7 dBi
![Satellite dish 90 cm TRX-EL ALU FAMAVAL [graphite]](https://www.dipol.com.pl/img/thumbnails/a9657+.jpg/05d1ff512583a65d1f0148a87c565527.jpg)
The FAMAVAL 90 TRX-EL aluminium satellite dish, measuring 90.5 cm x 83.4 cm, is characterised by its excellent reception performance.
• Size: 90 cm
• Material: aluminium
• Rigidity and durability
• Gain max. 38.7 dBi
• Material: aluminium
• Rigidity and durability
• Gain max. 38.7 dBi
![Satellite dish TRX-EL 110 FAMAVAL [graphite]](https://www.dipol.com.pl/img/thumbnails/a9659+.jpg/b26cc5ba4823f8d4c061c5d7be913473.jpg)
The 119 cm x 110 cm FAMAVAL 110 TRX EL steel satellite dish has excellent reception characteristics.
• Size: 110 cm
• Material: steel
• Resistant to strong winds
• Gain max. 41.2 dBi
• Material: steel
• Resistant to strong winds
• Gain max. 41.2 dBi
![Satellite Dish: TRX-EL 100 FAMAVAL [light colour]](https://www.dipol.com.pl/img/thumbnails/a9666+.jpg/75084a784ead9b791d440ddf381deba0.jpg)
FAMAVAL 100 cm steel satellite dish is made of galvanized steel.
• Size: 100 cm
• Material: steel
• Color: white
• Resistant to strong winds
• Gain max 40,3 dBi
• Material: steel
• Color: white
• Resistant to strong winds
• Gain max 40,3 dBi
![Satellite Dish: TRX-EL 100 FAMAVAL [graphite]](https://www.dipol.com.pl/img/thumbnails/a9667+.jpg/3ab8f191ac5e2cb0a2e286ccc788f54f.jpg)
FAMAVAL 100 cm steel satellite dish is made of galvanized steel.
• Size: 100 cm
• Material: steel
• Color: graphite
• Resistant to strong winds
• Gain max 40,3 dBi
• Material: steel
• Color: graphite
• Resistant to strong winds
• Gain max 40,3 dBi
![Satellite dish: DIPOL DPL-120 [light grey, RAL7035]](https://www.dipol.com.pl/img/thumbnails/a9682+.jpg/e3ea8e533494b25636c83315da7db4f5.jpg)
The DPL-120 satellite dish is a professional satellite dish dedicated for building SMATV systems in multi-family buildings.
• Dish dedicated for SMATV systems
• Size: 120 cm (122x129 cm)
• Gain max. 42.1 dBi at 12.75 GHz
• Half power angle: 1.4 degrees at 12.75 GHz
• 6-point dish mounting to intermediate dish
• Meets IEC1114-2 wind resistance standard
• Antenna has been salt bath tested to NBR 8094 standard
• The LNB is mounted on a bracket with two additional brackets.
• Second LNB bracket included
• Size: 120 cm (122x129 cm)
• Gain max. 42.1 dBi at 12.75 GHz
• Half power angle: 1.4 degrees at 12.75 GHz
• 6-point dish mounting to intermediate dish
• Meets IEC1114-2 wind resistance standard
• Antenna has been salt bath tested to NBR 8094 standard
• The LNB is mounted on a bracket with two additional brackets.
• Second LNB bracket included
![Satellite dish DIPOL DPL-120 + stub [dark graphite, RAL7016]](https://www.dipol.com.pl/img/thumbnails/a9684+.jpg/380d7369ec3d0738a2ae514cef5c6779.jpg)
The DPL-120 satellite dish is a professional satellite dish dedicated for building SMATV systems in multi-family buildings.
• Dish dedicated for SMATV systems
• Size: 120 cm (122x129 cm)
• Max gain. 42.1 dBi at 12.75 GHz
• Half power angle: 1.4 degrees at 12.75 GHz
• 6-point mounting to an intermediate dish
• Complies with IEC1114-2 wind resistance standard
• Tested in brine bath according to NBR 8094
• LNB mounted with a holder with two additional brackets
• Second LNB holder included
• Size: 120 cm (122x129 cm)
• Max gain. 42.1 dBi at 12.75 GHz
• Half power angle: 1.4 degrees at 12.75 GHz
• 6-point mounting to an intermediate dish
• Complies with IEC1114-2 wind resistance standard
• Tested in brine bath according to NBR 8094
• LNB mounted with a holder with two additional brackets
• Second LNB holder included
The bracket is designed for mounting on DIPOL DPL-120 dish. It enables the second LNB to be mounted on a single extension arm of a satellite dish.
• Designed for DIPOL DPL-120 cm dish
• Enables installation of a second LNB
• Enables installation of a second LNB
Made of durable and UV-resistant materials, the cover protects the converter from rain, snow, ice, dust and other contaminants.
• Easy installation
• The overall dimension of the plexiglass: 395 × 251 × 1 mm
• Suitable for three LNBs
• Universal application for all mounts
• Resistant to temperature changes
• Protects against direct exposure to rain, snow and UV rays
• The overall dimension of the plexiglass: 395 × 251 × 1 mm
• Suitable for three LNBs
• Universal application for all mounts
• Resistant to temperature changes
• Protects against direct exposure to rain, snow and UV rays
An LNB holder dedicated for Corab dishes
• Dedicated to 90 cm Corab dishes
Second LNB bracket (for 80, 100, 110 cm FAMAVAL dishes).
• Dedicated to 80 cm, 100 cm, 110 cm Famaval dishes
Bogacki plastic converter clamping ring for tube.
• For converters with a 40 mm diameter handle
• Fits Corab dishes
• Fits Corab dishes
Plastic converter clamping ring for Famaval dishes with a diameter of 80 cm.
• For converters with a 40 mm diameter handle
• Fits selected Famaval 80 cm dishes
• Fits selected Famaval 80 cm dishes
The U-2LNB(800)-J LNB second LNB bracket enables the installation of a second LNB to receive signals from two satellites.
• For converters with a 40 mm diameter handle
• Fits 80 cm and 90 cm Corab dishes
• Fits 80 cm and 90 cm Corab dishes
The U-4LNB-J mount for four LNBs enables four LNBs to be mounted to receive signals from four satellites.
• Bracket for 4 LNBs
• For converters with 40 mm diameter bracket.
• Fits 90 cm Corab dishes
• For converters with 40 mm diameter bracket.
• Fits 90 cm Corab dishes
Low-noise LWB202L Wideband LO 10.41 GHz satellite converter dedicated to SAT installations.
• LNB type: Wideband
• LO oscillator frequency: 10.41 GHz
• Low-noise LNB
• Two outputs: V-polarization, H-polarization
• Bracket diameter: 40 mm
• LO oscillator frequency: 10.41 GHz
• Low-noise LNB
• Two outputs: V-polarization, H-polarization
• Bracket diameter: 40 mm
The GT-WB1 LNB is dedicated for applications in multiswitch systems using Wide Band technology. It is based on a single local oscillator operating at 10.41 GHz.
• LNB type: Wide band for multiswitch systems
• Half of the cables (2 instead of 4)
• Two outputs: V polarization, H polarization
• Gain: 50-60 dB
• Neck diameter: 40 mm
• Half of the cables (2 instead of 4)
• Two outputs: V polarization, H polarization
• Gain: 50-60 dB
• Neck diameter: 40 mm
The IDLU-32L412-UNBRR-OPN /nc+/ satellite converter with UNICABLE output is designed to provide a signal to a maximum of 32 receivers by connecting only one coaxial cable.
• LNB type: Unicable
• Number of outputs: 1
• Programmed to work with nc+/canal+
• Gain min. 55 dB
• Holder diameter 40 mm
• Number of outputs: 1
• Programmed to work with nc+/canal+
• Gain min. 55 dB
• Holder diameter 40 mm
The IDLU-32UL40-UNBOO-OPP /cyfr. polsat/ LNB with UNICABLE output can supply from its single output up to 32 satellite receivers (tuners).
• LNB type: Unicable
• Number of outputs: 1
• Programmed to work with Cyfrowy Polsat decoders
• Gain min. 55 dB
• Holder diameter 40 mm
• Number of outputs: 1
• Programmed to work with Cyfrowy Polsat decoders
• Gain min. 55 dB
• Holder diameter 40 mm
The IDLP-WDB401 is an LNB used in multiswitch systems operating in Wide Band technology.
• Wideband LNB
• Local oscillator: 10.41 GHz
• Low noise
• Local oscillator: 10.41 GHz
• Low noise
LNB with 3 Unicable II outputs and one Legacy output.
• LNB type: Unicable + Legacy
• Number of outputs: 4 (3x Unicable II + 1x Legacy)
• Gain min. 55 dB
• Bracket diameter 40 mm
• Number of outputs: 4 (3x Unicable II + 1x Legacy)
• Gain min. 55 dB
• Bracket diameter 40 mm
The Single Inverto BLACK Premium satellite converter is a device for receiving satellite signals. It has one fullband output.
• Converter type: SINGLE
• Number of outputs: 1
• 60 dB amplification
• Handle diameter 40 mm
• Premium converter
• Number of outputs: 1
• 60 dB amplification
• Handle diameter 40 mm
• Premium converter
QUAD Inverto satellite converter is a device for receiving satellite signals. It has four fullband outputs.
• Converter type: QUAD
• Number of outputs: 4
• 60 dB amplification
• Handle diameter 40 mm
• Premium converter
• Number of outputs: 4
• 60 dB amplification
• Handle diameter 40 mm
• Premium converter
This twin LNB provides signals from two close satellites (e.g. Astra and Hotbird) for two independent sat receivers (or a dual-tuner PVR).
• Converter type: MONOBLOCK TWIN
• Number of outputs: 2
• Reception from Hotbird and Astra satellites
• Designed for 80 cm dish
• Diameter of bracket 40 mm
• Number of outputs: 2
• Reception from Hotbird and Astra satellites
• Designed for 80 cm dish
• Diameter of bracket 40 mm
The Twin Inverto satellite converter is a device for receiving satellite signals. It has two fullband outputs.
• Converter type: TWIN
• Number of outputs: 2
• 55 dB amplification
• Handle diameter 40 mm
• Number of outputs: 2
• 55 dB amplification
• Handle diameter 40 mm
Quatro LNB dedicated for multiswitch systems. Noise figure: 0.3 dB.
• LNB type: QUATRO
• Number of outputs: 4
• 55 dB gain
• Designed for multiswitch systems
• Holder diameter 40 mm
• Number of outputs: 4
• 55 dB gain
• Designed for multiswitch systems
• Holder diameter 40 mm
INVERTO's OCTO satellite converter is a device for receiving satellite signals. It has eight fullband outputs.
• Converter type: OCTO
• Number of outputs: 8
• 55 dB amplification
• Handle diameter 40 mm
• Number of outputs: 8
• 55 dB amplification
• Handle diameter 40 mm
The OCTO TOO 001 Triax LNB is a device that enables the reception of satellite signals. It has eight fullband outputs.
• LNB type: OCTO
• Number of outputs: 8
• 62 dB gain
• Diameter of the holder 40 mm
• Number of outputs: 8
• 62 dB gain
• Diameter of the holder 40 mm
The TWIN INVERTO Ultra Black satellite converter is a device for receiving satellite signals. It has two fullband outputs. It is characterised by high gain.
• Converter type: TWIN
• Number of outputs: 2
• 62 dB amplification
• Handle diameter 40 mm
• Premium converter
• Number of outputs: 2
• 62 dB amplification
• Handle diameter 40 mm
• Premium converter
The QUATRO INVERTO LNB is designed for operation in multiswitch systems (with one output for each band/polarization pair).
• LNB type: QUATRO
• Number of outputs: 4
• Designed for multiswitch systems
• 62 dB gain
• Holder diameter 40 mm
• Premium class LNB
• Number of outputs: 4
• Designed for multiswitch systems
• 62 dB gain
• Holder diameter 40 mm
• Premium class LNB
QUAD INVERTO Ultra Black converter dedicated to installation for four satellite receivers or two receivers with two heads. The converter is equipped with four independent fullband outputs.
• Converter type: QUAD
• Number of outputs: 4
• 62 dB amplification
• Handle diameter 40 mm
• Premium converter
• Number of outputs: 4
• 62 dB amplification
• Handle diameter 40 mm
• Premium converter
SINGLE TRIAX TSI 100 Gold LNB satellite converter dedicated to installation for one satellite receiver. The converter is equipped with one fullband output.
• Converter type: SINGLE
• Number of outputs: 1
• 62 dB amplification
• Handle diameter 40 mm
• Number of outputs: 1
• 62 dB amplification
• Handle diameter 40 mm
The TWIN TRIAX 200 Gold LNB satellite converter is equipped with two independent fullband outputs.
• Converter type: TWIN
• Number of outputs: 2
• 62 dB amplification
• bracket diameter 40 mm
• Number of outputs: 2
• 62 dB amplification
• bracket diameter 40 mm
QUAD TRIAX 404 Gold LNB satellite converter equipped with four independent fullband outputs.
• Converter type: QUAD
• Number of outputs: 4
• 62 dB amplification
• Handle diameter 40 mm
• Number of outputs: 4
• 62 dB amplification
• Handle diameter 40 mm
QUATRO TRIAX 400 Gold LNB satellite converter dedicated for multiswitch installations. One output for each polarization-band pair. Colour coding of the outputs makes them easy to identify.
• LNB type: QUATRO
• Number of outputs: 4
• Designed for multiswitch systems
• 62 dB gain
• Holder diameter 40 mm
• Number of outputs: 4
• Designed for multiswitch systems
• 62 dB gain
• Holder diameter 40 mm
The optical SAT/RTV OTX 1310 KIT from TRIAX allows the introduction of DVB-S/S2 satellite signals and DVB-T2 digital terrestrial TV, DAB radio and FM radio into a fibre optic installation.
• Fiber optic cabling
• One fiber optic cable instead of 5 or 9 cable bus
• Wideband LNB dedicated for satellite installation
• One fiber optic cable instead of 5 or 9 cable bus
• Wideband LNB dedicated for satellite installation
SINGLE Fte Excellento satellite converter dedicated to installation for one satellite receiver. The converter is equipped with one fullband output.
• Converter type: SINGLE
• Number of outputs: 1
• 65 dB amplification
• Handle diameter 40 mm
• Number of outputs: 1
• 65 dB amplification
• Handle diameter 40 mm
Fte eXcellento TWIN LNB A9863 is designed for operation with two single receivers or one double (twin-tuner) receiver. The LNB has two independent fullband outputs.
• Converter type: TWIN
• Number of outputs: 2
• 65 dB amplification
• Handle diameter 40 mm
• Number of outputs: 2
• 65 dB amplification
• Handle diameter 40 mm
Fte eXcellento QUATRO LNB A9864 is designed for operation in multiswitch systems (four outputs with different polarization/band combinations). Color markings are used for easier identification.
• Converter type: QUATRO
• Number of outputs: 4
• Designed for multiswitch installations
• 65 dB amplification
• Bracket diameter 40 mm
• Number of outputs: 4
• Designed for multiswitch installations
• 65 dB amplification
• Bracket diameter 40 mm
Fte eXcellento QUAD LNB A9865 is designed for operation with four single receivers or two double (twin-tuner) receivers. The LNB has four independent fullband outputs.
• Converter type: QUAD
• Number of outputs: 4
• 65 dB amplification
• Handle diameter 40 mm
• Number of outputs: 4
• 65 dB amplification
• Handle diameter 40 mm
OCTO FTE Excellento satellite LNB equipped with eight independent fullband outputs.
• Converter type: OCTO
• Number of outputs: 8
• Gain of 65 dB
• Handle diameter 40 mm
• Number of outputs: 8
• Gain of 65 dB
• Handle diameter 40 mm
DISEQC 2.0 2X1 DS-7070 Signal switch used in installations distributing signals from two satellites.
• DiseqC switch
• 2 inputs, 1 output
• High isolation between inputs and outputs
• Grounding connector
• ABS housing
• Easy to install
• Two cable ties to ensure proper attachment
• 2 inputs, 1 output
• High isolation between inputs and outputs
• Grounding connector
• ABS housing
• Easy to install
• Two cable ties to ensure proper attachment
![Cable Tie with ID Tag: GTK-110M [100 pcs.]](https://www.dipol.com.pl/img/thumbnails/e950611+.jpg/0e591a579476a115e15dc246cd2b57d4.jpg)
The cable tie can be used to make cable harnesses or to mark wires for easier identification.
• Color: white
• Length: 110 mm
• Width: 2.5 mm
• Plate size 10x20 mm
• Material: polyamide 6.6
• Length: 110 mm
• Width: 2.5 mm
• Plate size 10x20 mm
• Material: polyamide 6.6
![Cable Tie: TZ10/3Ns (white) [100 pcs.]](https://www.dipol.com.pl/img/thumbnails/e951032+.jpg/f8707e16d788fac6c5f129af11c65ec1.jpg)
Clamping tape can be used to join cable bundles or to mark cables for easier identification.
• High tenacity strength: 114 kg
• Wide temperature range: -40°C to +85°C
• Self-extinguishing material: flame class UL94 V0 or V2
• Wide temperature range: -40°C to +85°C
• Self-extinguishing material: flame class UL94 V0 or V2
![Cable Ties GTK-100M (100x2.5 mm, yellow) [100 pcs.]](https://www.dipol.com.pl/img/thumbnails/e951042+.jpg/bc5982c4da2fa80c811f030a5adf30b6.jpg)
Clamping tape can be used to join cable bundles or to mark cables for easier identification.
• Colour: yellow
• The band is used to mark the wires
• Self-extinguishing with flammability classification to UL 94 V2
• The band is used to mark the wires
• Self-extinguishing with flammability classification to UL 94 V2
![Cable Ties GTK-100M (100x2.5 mm, red) [100 pcs.]](https://www.dipol.com.pl/img/thumbnails/e951043+.jpg/dca8c9efbb23d8864840fcbe2eb73728.jpg)
Clamping tape can be used to join cable bundles or to mark cables for easier identification.
• Colour: red
• The band is used to mark the wires
• Self-extinguishing with flammability rating to UL 94 V2
• The band is used to mark the wires
• Self-extinguishing with flammability rating to UL 94 V2
![Cable Ties GTK-100M (100x2.5 mm, green) [100 pcs.]](https://www.dipol.com.pl/img/thumbnails/e951044+.jpg/7c81e5085d5cadac9a6841ada2c6c6c6.jpg)
The E951044 cable ties can be used for binding cables into bundles or marking cables for easier identification.
• Colour: green
• The band is used to mark the wires
• Self-extinguishing with flammability classification to UL 94 V2
• The band is used to mark the wires
• Self-extinguishing with flammability classification to UL 94 V2
![Cable Ties GTK-100M (100x2.5 mm, black) [100 pcs.]](https://www.dipol.com.pl/img/thumbnails/e951045+.jpg/33698c51b5ef93eccc1dbbb134ddcde8.jpg)
Clamping tape can be used to join cable bundles or to mark cables for easier identification.
• Colour: black
• The band is used to mark the wires
• Self-extinguishing with flammability rating to UL 94 V2
• The band is used to mark the wires
• Self-extinguishing with flammability rating to UL 94 V2
![Cable Tie TZ20/3Ns (white) [100 pcs.]](https://www.dipol.com.pl/img/thumbnails/e952032+.jpg/84bcf076d594208ae4644b2841fde606.jpg)
Clamping tape can be used to join cable bundles or to mark cables for easier identification.
• High mechanical breaking strength
• High thermal resistance
• Self-extinguishing with flammability classification to UL94 V0 or V
• High thermal resistance
• Self-extinguishing with flammability classification to UL94 V0 or V
![Cable Tie TZ20/5Cs (black) [100pcs]](https://www.dipol.com.pl/img/thumbnails/e952054+.jpg/d7f6e2913d6d977a447170465d10e621.jpg)
Clamping tape can be used to join cable bundles or to mark cables for easier identification.
• High mechanical breaking strength
• High thermal resistance
• Self-extinguishing with flammability classification to UL94 V0 or V
• High thermal resistance
• Self-extinguishing with flammability classification to UL94 V0 or V
![Cable Tie TZ37/5Cs (black) [100pcs]](https://www.dipol.com.pl/img/thumbnails/e953754+.jpg/b5cb08a912d705bd286794ec561aee34.jpg)
Clamping tape can be used to join cable bundles or to mark cables for easier identification.
• High mechanical breaking strength
• High thermal resistance
• Self-extinguishing with flammability classification to UL94 V0 or V
• High thermal resistance
• Self-extinguishing with flammability classification to UL94 V0 or V
MRP-504 Signal 5/4 multiswitch with passive terrestrial TV path enables the implementation of RTV/SAT installations in detached houses and small residential and office buildings.
• Compact 5/4 multiswitch
• Inputs: 4 from quatro converter, 1 terrestrial DVB-T/T2
• Outputs: 4 for SAT tuners
• Passive FM/DVB-T/T2 path equipped with On/Off switch 12 V DC
• High output separation: 30 dB (no crosstalk between bands and polarities)
• Cable characteristics correction
• Very high input level: 105 dBμV
• High output level: 100 dBμV
• Voltage controls for power supply and multiswitch
• External power supply DC 18 V 1 A
• Inputs: 4 from quatro converter, 1 terrestrial DVB-T/T2
• Outputs: 4 for SAT tuners
• Passive FM/DVB-T/T2 path equipped with On/Off switch 12 V DC
• High output separation: 30 dB (no crosstalk between bands and polarities)
• Cable characteristics correction
• Very high input level: 105 dBμV
• High output level: 100 dBμV
• Voltage controls for power supply and multiswitch
• External power supply DC 18 V 1 A
The MRP-508 Signal 5/8 multiswitch with a passive terrestrial TV path enables the implementation of RTV/SAT installations in detached houses and small residential and office buildings.
• Radial topology
• 8 outputs
• Passive FM/DAB/DVB-T path with On/Off 12 VDC
• Isolation between inputs >25 dB
• High isolation between outputs: 28 dB
• Cable characteristics equalization
• Very high maximum input level: 105 dBμV
• High maximum output: 100 dBμV
• Compact size: 146×120×42 mm
• 8 outputs
• Passive FM/DAB/DVB-T path with On/Off 12 VDC
• Isolation between inputs >25 dB
• High isolation between outputs: 28 dB
• Cable characteristics equalization
• Very high maximum input level: 105 dBμV
• High maximum output: 100 dBμV
• Compact size: 146×120×42 mm
MRP-512 Signal 5/12 multiswitch with passive terrestrial TV path enables the implementation of RTV/SAT installations in detached houses and small residential and office buildings.
• Radial multiswitch
• 12 outputs
• Passive FM/DVB-T/T2 path equipped with On/Off switch 12 V DC
• Separation between inputs greater than 25 dB
• High separation of outputs: 30 dB
• Cable characteristic adjustment
• Very high input level: 105 dBμV
• High output level: 100 dBμV
• compact dimensions
• 12 outputs
• Passive FM/DVB-T/T2 path equipped with On/Off switch 12 V DC
• Separation between inputs greater than 25 dB
• High separation of outputs: 30 dB
• Cable characteristic adjustment
• Very high input level: 105 dBμV
• High output level: 100 dBμV
• compact dimensions
The MRP-908 Signal 9/8 multiswitch with passive terrestrial TV path makes it possible to implement RTV/SAT installations in detached houses and small residential and office buildings.
• Radial multiswitch
• Dual satellite and DVB-T/T2 signals
• 8 outputs
• Passive FM/DVB-T/T2 path equipped with On/Off switch 12 V DC
• Separation between inputs greater than 25 dB
• High separation of outputs: 30 dB
• Cable characteristic adjustment
• Very high input level: 105 dBμV
• High output level: 100 dBμV
• Compact dimensions
• Dual satellite and DVB-T/T2 signals
• 8 outputs
• Passive FM/DVB-T/T2 path equipped with On/Off switch 12 V DC
• Separation between inputs greater than 25 dB
• High separation of outputs: 30 dB
• Cable characteristic adjustment
• Very high input level: 105 dBμV
• High output level: 100 dBμV
• Compact dimensions
The SIGNAL PRO MS-508 multiswitch enables distribution of signals from one satellite, terrestrial DVB-T2 and FM/DAB+ radio to 8 terminal outlets.
• 5 inputs (4×SAT, 1×TERR)
• 8 independent subscriber outputs
• Pass-through design (cascadable)
• very good impedance matching (IRL > 21 dB)
• Die-cast housing
• 8 independent subscriber outputs
• Pass-through design (cascadable)
• very good impedance matching (IRL > 21 dB)
• Die-cast housing
MS-900 SIGNAL PRO is a professional multiswitch bus amplifier for two satellite positions and RTV path.
• Dedicated to SIGNAL PRO series multiswitches
• Cascadable multiswitch systems
• Compensation of signal losses in cascaded installations
• 15 dB gain adjustable for each channel
• Stable operation in SAT and DVB-T2/DAB/FM paths
• Large SMATV systems in multi-family buildings
• Low insertion loss, high isolation between signal paths
• Cascadable multiswitch systems
• Compensation of signal losses in cascaded installations
• 15 dB gain adjustable for each channel
• Stable operation in SAT and DVB-T2/DAB/FM paths
• Large SMATV systems in multi-family buildings
• Low insertion loss, high isolation between signal paths
MS-916 SIGNAL PRO 9/16 multiswitch is designed for SMATV SMATV systems.
• 9 inputs (8×SAT, 1×TERR)
• 16 independent subscriber outputs
• Pass-through design (cascadable).
• Very good impedance matching (IRL > 21 dB)
• Die-cast housing
• External 20 V 2.5 A DC power supply with F connector included
• LED indication at subscriber outputs - easy diagnostics of the installation
• Application in SMATV systems in multi-family buildings.
• Class A screening
• 4 year warranty confirming excellent quality of product
• 16 independent subscriber outputs
• Pass-through design (cascadable).
• Very good impedance matching (IRL > 21 dB)
• Die-cast housing
• External 20 V 2.5 A DC power supply with F connector included
• LED indication at subscriber outputs - easy diagnostics of the installation
• Application in SMATV systems in multi-family buildings.
• Class A screening
• 4 year warranty confirming excellent quality of product
The MS-924 SIGNAL PRO 9/24 multiswitch is designed for SMATV SMATV systems.
• 9 inputs (8×SAT, 1×TERR)
• 24 independent subscriber outputs
• Pass-through design (cascadable).
• Very good impedance matching (IRL > 21 dB)
• Open casing
• External 20 V 2.5 A DC power supply with F connector included
• LED indication at subscriber outputs - easy diagnostics of the installation
Application in SMATV systems in multi-family buildings.
• Screening class A
• 4 year warranty confirming excellent quality of product
• 24 independent subscriber outputs
• Pass-through design (cascadable).
• Very good impedance matching (IRL > 21 dB)
• Open casing
• External 20 V 2.5 A DC power supply with F connector included
• LED indication at subscriber outputs - easy diagnostics of the installation
Application in SMATV systems in multi-family buildings.
• Screening class A
• 4 year warranty confirming excellent quality of product
MS-932 SIGNAL PRO 9/32 multiswitch is designed for SMATV SMATV systems.
• 9 inputs (8×SAT, 1×TERR)
• 32 independent subscriber outputs
• Pass-through design (cascadable).
• Very good impedance matching (IRL > 21 dB)
• Open casing
• External 20 V 2.5 A DC power supply with F-connector included
• LED indication at subscriber outputs - easy diagnostics of the installation
• Application in SMATV systems in multi-family buildings.
• Screening class A
• 4 year warranty confirming excellent quality of product
• 32 independent subscriber outputs
• Pass-through design (cascadable).
• Very good impedance matching (IRL > 21 dB)
• Open casing
• External 20 V 2.5 A DC power supply with F-connector included
• LED indication at subscriber outputs - easy diagnostics of the installation
• Application in SMATV systems in multi-family buildings.
• Screening class A
• 4 year warranty confirming excellent quality of product
The UCH-PRO-1 bracket has been designed for mounting SIGNAL PRO series multiswitches in professional RTV/SAT installations.
• Compatible with SIGNAL PRO series multiswitches without the need for additional adapters
• Easy and quick installation into housings with 4 mm diameter screws
• Two Signal PRO multiswitches have to be mounted using 3 UCH-PRO-1 R69985 brackets
• Stable mounting of devices in tele-technical enclosures
• Optimal design for proper air flow and cooling of equipment
• Easy and quick installation into housings with 4 mm diameter screws
• Two Signal PRO multiswitches have to be mounted using 3 UCH-PRO-1 R69985 brackets
• Stable mounting of devices in tele-technical enclosures
• Optimal design for proper air flow and cooling of equipment
The SA-51 amplifier (with power supply) is designed for use in multiswitch installations. It is equipped with four satellite inputs and one DVB-T/T2/Radio input.
• Multiswitch bus amplifier with power supply
• High signal level at outputs
• Refrigerated housing - class A
• Power supply for other devices in the installation (amplifiers, multiswitches)
• Powering of DVB-T/T2 antenna preamplifiers
• High signal level at outputs
• Refrigerated housing - class A
• Power supply for other devices in the installation (amplifiers, multiswitches)
• Powering of DVB-T/T2 antenna preamplifiers
The SA-51 amplifier (without power supply) is designed for use in multiswitch installations. It is equipped with four satellite inputs and one DVB-T/T2/Radio input.
• Multiswitch bus amplifier without power supply
• High signal level at outputs
• Refrigerated housing - class A
• Powering of other devices in the installation (amplifiers, multiswitches)
• Powering of DVB-T/T2 antenna preamplifiers
• High signal level at outputs
• Refrigerated housing - class A
• Powering of other devices in the installation (amplifiers, multiswitches)
• Powering of DVB-T/T2 antenna preamplifiers
The splitter is used in multiswitch systems to extend the signal bus consisting of four satellite lines (carrying signals from a Quatro LNB) and terrestrial line with DVB-T, DAB, FM signals.
• Sub-network partition (two branches)
• High screening efficiency
• Replaces 5 individual TV/SAT splitters
• Optionally switched-on DC transition
• Available optional tap versions with 10, 15, 20 dB attenuation
• High screening efficiency
• Replaces 5 individual TV/SAT splitters
• Optionally switched-on DC transition
• Available optional tap versions with 10, 15, 20 dB attenuation
SD-510 taps with 10 dB attenuation are used in multiswitch installations. It is used to separate signals from the multiswitch bus.
• Dividing the multiswitch bus into 2 tracks
• High screening efficiency
• Replaces 5 single TV/SAT taps
• DC feed-through selectable
• 10 dB tapping attenuation
• High screening efficiency
• Replaces 5 single TV/SAT taps
• DC feed-through selectable
• 10 dB tapping attenuation
SD-515 tap with 15 dB attenuation is used in multiswitch installations. It is used to separate signals from the multiswitch bus.
• Dividing the multiswitch bus into 2 tracks
• High screening efficiency
• Replaces 5 single TV/SAT taps
• DC feed-through selectable
• 15 dB tapping attenuation
• High screening efficiency
• Replaces 5 single TV/SAT taps
• DC feed-through selectable
• 15 dB tapping attenuation
SD-520 tap with 20 dB attenuation is used in multiswitch installations. It is used to separate signals from the multiswitch bus.
• Dividing the multiswitch bus into 2 tracks
• High screening efficiency
• Replaces 5 single TV/SAT taps
• DC feed-through selectable
• 20 dB tapping attenuation
• High screening efficiency
• Replaces 5 single TV/SAT taps
• DC feed-through selectable
• 20 dB tapping attenuation
The SDQ-508 splitter is used in multiswitch installations to divide the signal from the multiswitch bus into 4 subnetworks.
• Dividing the multiswitch bus into 4 tracks
• High screening efficiency
• Switchable DC-transition
• 4 dB attenuation
• High screening efficiency
• Switchable DC-transition
• 4 dB attenuation
The SD-904 splitter is used in multiswitch installations to split the signal from the multiswitch bus into 2 subnetworks.
• 9-cable system (8x SAT + terrestrial TV/Radio)
• Divides the system into two subnetworks
• Replaces 9 individual TV/SAT splitters
• Equipped with switched-on/off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
• Divides the system into two subnetworks
• Replaces 9 individual TV/SAT splitters
• Equipped with switched-on/off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
SD-910 tap with 10 dB attenuation is used in multiswitch installations. It is used to separate signals from the multiswitch bus.
• 8 taps for SAT + terrestrial TV
• Replaces 9 single TV/SAT taps
• Possibility of switching off the DC line
• Attenuation of tap path 10 dB
• Armoured casing guaranteeing high level of screening - class A
• Replaces 9 single TV/SAT taps
• Possibility of switching off the DC line
• Attenuation of tap path 10 dB
• Armoured casing guaranteeing high level of screening - class A
SD-915 taps with 15 dB attenuation are used in multiswitch installations. It is used to separate signals from the multiswitch bus.
• 8 taps for SAT + terrestrial TV
• Replaces 9 single TV/SAT taps
• Possibility of switching off the DC line
• Attenuation of tap path 15 dB
• Armoured casing guaranteeing high level of screening - class A
• Replaces 9 single TV/SAT taps
• Possibility of switching off the DC line
• Attenuation of tap path 15 dB
• Armoured casing guaranteeing high level of screening - class A
SD-920 tap with 20 dB attenuation is used in multiswitch installations. It is used to separate signals from the multiswitch bus.
• 8 taps for SAT + terrestrial TV
• Replaces 9 single TV/SAT taps
• Possibility of switching off the DC line
• Attenuation of tap path 20 dB
• Armoured casing guaranteeing high level of screening - class A
• Replaces 9 single TV/SAT taps
• Possibility of switching off the DC line
• Attenuation of tap path 20 dB
• Armoured casing guaranteeing high level of screening - class A
The SDQ-908 splitter is used in multiswitch installations to divide the signal from the multiswitch bus into 4 subnetworks.
• 8 track SAT + terrestrial TV splitter
• Split into 4 subnetworks
• Replaces 9 single TV/SAT splitters
• Has the ability to turn on/off the DC pass-through
• Armoured casing guaranteeing high level of shielding - class A
• Split into 4 subnetworks
• Replaces 9 single TV/SAT splitters
• Has the ability to turn on/off the DC pass-through
• Armoured casing guaranteeing high level of shielding - class A
MR508 5 in/8 out multiswitch with power supply and active terrestrial TV path dedicated for small and medium installations with distribution of RTV/SAT signals.
• High-end device dedicated to small, collective TV/SAT installations
• Distribution of satellite, terrestrial TV and radio signals
• Capable of distributing signals to 8 single outlets or 4 PVR receivers
• Armoured casing guaranteeing high level of shielding - class A
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
• Distribution of satellite, terrestrial TV and radio signals
• Capable of distributing signals to 8 single outlets or 4 PVR receivers
• Armoured casing guaranteeing high level of shielding - class A
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
MR512 5 in/12 out multiswitch with power supply and active terrestrial TV path dedicated for small and medium installations with distribution of RTV/SAT signals.
• High-end device dedicated to small, collective TV/SAT installations.
• Distribution of satellite, terrestrial TV and radio signals.
• Capable of distributing signals to 12 single outlets or 6 PVR receivers.
• Armoured casing guaranteeing high level of shielding - class A.
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
• Distribution of satellite, terrestrial TV and radio signals.
• Capable of distributing signals to 12 single outlets or 6 PVR receivers.
• Armoured casing guaranteeing high level of shielding - class A.
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
The MR516 5 in/16 out multiswitch with power supply and active terrestrial TV path is dedicated for small and medium-sized installations with RTV/SAT signal distribution.
• High-end device dedicated to small, collective TV/SAT installations
• Distribution of satellite, terrestrial TV and radio signals
• Capable of distributing signals to 16 single outlets or 8 PVR receivers
• Armoured casing guaranteeing high level of shielding - class A
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
• Distribution of satellite, terrestrial TV and radio signals
• Capable of distributing signals to 16 single outlets or 8 PVR receivers
• Armoured casing guaranteeing high level of shielding - class A
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
MR524 5 in/24 out multiswitch with power supply and active terrestrial TV path dedicated for small and medium-sized installations with distribution of RTV/SAT signals.
• High-end device dedicated to small, collective TV/SAT installations
• Distribution of satellite, terrestrial TV and radio signals
• Capable of distributing signals to 24 single outlets or 12 PVR receivers
• Armoured casing guaranteeing high level of shielding - class A
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
• Distribution of satellite, terrestrial TV and radio signals
• Capable of distributing signals to 24 single outlets or 12 PVR receivers
• Armoured casing guaranteeing high level of shielding - class A
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
MR532 5 in/32 out multiswitch with power supply and active terrestrial TV path dedicated for small and medium-sized installations with distribution of RTV/SAT signals.
• High-end device dedicated to small, collective TV/SAT installations.
• Distribution of satellite, terrestrial TV and radio signals.
• Capable of distributing up to 32 single outlets or 16 PVR receivers.
• Armoured casing guaranteeing high level of shielding - class A.
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
• Distribution of satellite, terrestrial TV and radio signals.
• Capable of distributing up to 32 single outlets or 16 PVR receivers.
• Armoured casing guaranteeing high level of shielding - class A.
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
Multiswitch MV508 5 in/8 out without power supply and active terrestrial TV path dedicated for medium and large installations with distribution of RTV/SAT signals.
• MV multiswitch series for SMATV systems
• Single satellite + DVB-T/T2 signals
• 8 subscriber outlets
• Allows you to build flexible installations
• Top class equipment
• The cast iron casing ensures high screening efficiency
• Switches instead of traditional potentiometers (more stable settings)
• High output signal level - up to 80 m cables to sockets
• Grouping of outputs according to gain
• Built-in pre-correction of cable attenuation characteristics
• Local or remote power supply
• Practically zero failure rate
• Free SatNet software for network design
• Single satellite + DVB-T/T2 signals
• 8 subscriber outlets
• Allows you to build flexible installations
• Top class equipment
• The cast iron casing ensures high screening efficiency
• Switches instead of traditional potentiometers (more stable settings)
• High output signal level - up to 80 m cables to sockets
• Grouping of outputs according to gain
• Built-in pre-correction of cable attenuation characteristics
• Local or remote power supply
• Practically zero failure rate
• Free SatNet software for network design
Multiswitch MV512 5 in/12 out without power supply and active terrestrial TV path dedicated for medium and large installations with distribution of RTV/SAT signals.
• MV multiswitch series for SMATV systems
• Single satellite + DVB-T/T2 signals
• 12 subscriber outlets
• Allows you to build flexible installations
• Top class equipment
• The cast iron casing ensures high screening effectiveness.
• Switches instead of traditional potentiometers (more stable settings)
• High output signal level - up to 80 m cables to sockets
• Grouping of outputs according to gain
• Built-in pre-correction of cable attenuation characteristics
• Local or remote power supply
• Practically zero failure rate
• Free SatNet software for network design
• Single satellite + DVB-T/T2 signals
• 12 subscriber outlets
• Allows you to build flexible installations
• Top class equipment
• The cast iron casing ensures high screening effectiveness.
• Switches instead of traditional potentiometers (more stable settings)
• High output signal level - up to 80 m cables to sockets
• Grouping of outputs according to gain
• Built-in pre-correction of cable attenuation characteristics
• Local or remote power supply
• Practically zero failure rate
• Free SatNet software for network design
Multiswitch MV516 5 in/16 out without power supply and active terrestrial TV path dedicated for medium and large installations with distribution of RTV/SAT signals.
• MV multiswitch series for SMATV systems
• Single satellite + DVB-T/T2 signals
• 16 subscriber outlets
• Allows you to build flexible installations
• Top class equipment
• The cast iron casing ensures high screening efficiency
• Switches instead of traditional potentiometers (more stable settings)
• High output signal level - up to 80m cables to sockets
• Grouping of outputs according to gain
• Built-in pre-correction of cable attenuation characteristics
• Local or remote power supply
• Practically zero failure rate
• Free SatNet software for network design
• Single satellite + DVB-T/T2 signals
• 16 subscriber outlets
• Allows you to build flexible installations
• Top class equipment
• The cast iron casing ensures high screening efficiency
• Switches instead of traditional potentiometers (more stable settings)
• High output signal level - up to 80m cables to sockets
• Grouping of outputs according to gain
• Built-in pre-correction of cable attenuation characteristics
• Local or remote power supply
• Practically zero failure rate
• Free SatNet software for network design
Multiswitch MV524 5 in /24 out without power supply and active terrestrial TV path dedicated for medium and large installations with distribution of RTV/SAT signals.
• MV multiswitch series for SMATV systems
• Single satellite + DVB-T/T2 signals
• 24 subscriber outlets
• Allows you to build flexible installations
• Top class equipment
• The cast iron casing ensures high screening efficiency
• Switches instead of traditional potentiometers (more stable settings)
• High output signal level - up to 80 m cables to sockets
• Grouping of outputs according to gain
• Built-in pre-correction of cable attenuation characteristics
• Local or remote power supply
• Practically zero failure rate
• Free SatNet software for network design
• Single satellite + DVB-T/T2 signals
• 24 subscriber outlets
• Allows you to build flexible installations
• Top class equipment
• The cast iron casing ensures high screening efficiency
• Switches instead of traditional potentiometers (more stable settings)
• High output signal level - up to 80 m cables to sockets
• Grouping of outputs according to gain
• Built-in pre-correction of cable attenuation characteristics
• Local or remote power supply
• Practically zero failure rate
• Free SatNet software for network design
Multiswitch MV532 5 in/32 out multiswitch without power supply and active terrestrial TV path dedicated for medium and large installations with distribution of RTV/SAT signals.
• MV multiswitch series for SMATV systems
• Single satellite + DVB-T/T2 signals
• 32 subscriber outlets
• Allows you to build flexible installations
• Top class equipment
• The cast iron casing ensures high screening efficiency
• Switches instead of traditional potentiometers (more stable settings)
• High output signal level - up to 80m cables to sockets
• Grouping of outputs according to gain
• Built-in pre-correction of cable attenuation characteristics
• Local or remote power supply
• Practically zero failure rate
• Free SatNet software for network design
• Single satellite + DVB-T/T2 signals
• 32 subscriber outlets
• Allows you to build flexible installations
• Top class equipment
• The cast iron casing ensures high screening efficiency
• Switches instead of traditional potentiometers (more stable settings)
• High output signal level - up to 80m cables to sockets
• Grouping of outputs according to gain
• Built-in pre-correction of cable attenuation characteristics
• Local or remote power supply
• Practically zero failure rate
• Free SatNet software for network design
MULTISWITCH MR908 9 in/8 out multiswitch with power supply and active/ passive terrestrial TV path dedicated for small and medium installations with distribution of RTV/SAT signals.
• 9/8 multiswitch for systems with radial topology
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path with LTE filter (47-790 MHz)
• Passive terrestrial TV path (5-862 MHz)
• Built-in power supply
• Die-cast housing guarantying high screening efficiency (class A)
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path with LTE filter (47-790 MHz)
• Passive terrestrial TV path (5-862 MHz)
• Built-in power supply
• Die-cast housing guarantying high screening efficiency (class A)
MR912 9 in/12 out multiswitch with power supply and active/passive terrestrial TV path dedicated for small and medium installations with distribution of RTV/SAT signals.
• 9/12 multiswitch for radial topology
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path with LTE filter (47-790 MHz)
• Passive terrestrial TV path (5-862 MHz)
• Built-in power supply
• Die-cast housings guarantying high screening efficiency (class A)
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path with LTE filter (47-790 MHz)
• Passive terrestrial TV path (5-862 MHz)
• Built-in power supply
• Die-cast housings guarantying high screening efficiency (class A)
MR916 9 in/16 out multiswitch with power supply and active/passive terrestrial TV path dedicated for small and medium installations with distribution of RTV/SAT signals.
• High-performance radial multiswitch for 16-slot installation
• Capable of connecting up to 8 PVR outlets
• 4 year warranty
• High output level of SAT and DVB-T/T2 signals
• Built-in pre-correction of cable characteristics
• Grouping of outputs according to output level
• Separation between inputs greater than 30 dB
• Capable of feeding a preamplifier into a terrestrial TV antenna
• Open casing guaranteeing high level of shielding - class A
• Capable of connecting up to 8 PVR outlets
• 4 year warranty
• High output level of SAT and DVB-T/T2 signals
• Built-in pre-correction of cable characteristics
• Grouping of outputs according to output level
• Separation between inputs greater than 30 dB
• Capable of feeding a preamplifier into a terrestrial TV antenna
• Open casing guaranteeing high level of shielding - class A
MR924 9 in/24 out multiswitch with power supply and active/passive terrestrial TV path dedicated for small and medium installations with distribution of RTV/SAT signals.
• High-performance radial multiswitch for 24-slot installation
• Built-in cable pre-correction
• Grouping of outputs according to output level
• Separation between inputs greater than 30 dB
• Preamplifier feed for terrestrial antenna
• Active terrestrial signal path equipped with LTE filter (47-790 MHz)
• Passive TV signal path (5-862 MHz)
• Built-in power supply
• Open casing guaranteeing high level of shielding - class A
• Built-in cable pre-correction
• Grouping of outputs according to output level
• Separation between inputs greater than 30 dB
• Preamplifier feed for terrestrial antenna
• Active terrestrial signal path equipped with LTE filter (47-790 MHz)
• Passive TV signal path (5-862 MHz)
• Built-in power supply
• Open casing guaranteeing high level of shielding - class A
Multiswitch MR932 9 in/32 out multiswitch with power supply and active/passive terrestrial TV path dedicated for small and medium installations with distribution of RTV/SAT signals.
• High-performance radial multiswitch for 32-slot installation
• Built-in cable pre-correction
• Grouping of outputs according to output level
• Separation between inputs greater than 30 dB
• Preamplifier feeding for terrestrial antenna
• Active terrestrial signal path equipped with LTE filter (47-790 MHz)
• Passive TV signal path (5-862 MHz)
• Built-in power supply
• Open casing guaranteeing high level of shielding - class A
• Built-in cable pre-correction
• Grouping of outputs according to output level
• Separation between inputs greater than 30 dB
• Preamplifier feeding for terrestrial antenna
• Active terrestrial signal path equipped with LTE filter (47-790 MHz)
• Passive TV signal path (5-862 MHz)
• Built-in power supply
• Open casing guaranteeing high level of shielding - class A
Multiswitch MV908 9 in/8 out without power supply and active terrestrial TV path dedicated for medium and large installations with distribution of RTV/SAT signals.
• Radial multiswitch
• 8 outputs
• Built-in cable pre-correction
• Grouping of outputs according to output level
• Separation between inputs greater than 30 dB
• Preamplifier feed for terrestrial antenna
• Active terrestrial signal path equipped with LTE filter (47-790 MHz)
• Open casing guaranteeing high level of shielding - class A
• 8 outputs
• Built-in cable pre-correction
• Grouping of outputs according to output level
• Separation between inputs greater than 30 dB
• Preamplifier feed for terrestrial antenna
• Active terrestrial signal path equipped with LTE filter (47-790 MHz)
• Open casing guaranteeing high level of shielding - class A
TERRA multiswitch MV-912L class A, 9-input, 12-output with active terrestrial - without power supply
Multiswitch MV912 9in/12output without power supply and active terrestrial TV path dedicated for medium and large installations with distribution of RTV/SAT signals.
• Radial multiswitch
• 12 outputs
• Built-in pre-correction of cable characteristics
• Grouping of outputs according to output level
• Separation between inputs greater than 30 dB
• Preamplifier feed for terrestrial antenna
• Active terrestrial signal path equipped with LTE filter (47-790 MHz)
• Open casing guaranteeing high level of shielding - class A
• 12 outputs
• Built-in pre-correction of cable characteristics
• Grouping of outputs according to output level
• Separation between inputs greater than 30 dB
• Preamplifier feed for terrestrial antenna
• Active terrestrial signal path equipped with LTE filter (47-790 MHz)
• Open casing guaranteeing high level of shielding - class A
Multiswitch MV916 9in/16output without power supply and active terrestrial TV path dedicated for medium and large installations with distribution of RTV/SAT signals.
• Radial multiswitch
• 16 outputs
• Built-in pre-correction of cable characteristics
• Grouping of outputs according to output level
• Separation between inputs greater than 30 dB
• Preamplifier feed for terrestrial antenna
• Active terrestrial signal path equipped with LTE filter (47-790 MHz)
• Open casing guaranteeing high level of shielding - class A
• 16 outputs
• Built-in pre-correction of cable characteristics
• Grouping of outputs according to output level
• Separation between inputs greater than 30 dB
• Preamplifier feed for terrestrial antenna
• Active terrestrial signal path equipped with LTE filter (47-790 MHz)
• Open casing guaranteeing high level of shielding - class A
Multiswitch MV924 9in/24output without power supply and active terrestrial TV path dedicated for medium and large installations with distribution of RTV/SAT signals.
• Radial multiswitch
• 24 outputs
• Built-in pre-correction of cable characteristics
• Grouping of outputs according to output level
• Separation between inputs greater than 30 dB
• Preamplifier feed for terrestrial antenna
• Active terrestrial signal path equipped with LTE filter (47-790 MHz)
• Open casing guaranteeing high level of shielding - class A
• 24 outputs
• Built-in pre-correction of cable characteristics
• Grouping of outputs according to output level
• Separation between inputs greater than 30 dB
• Preamplifier feed for terrestrial antenna
• Active terrestrial signal path equipped with LTE filter (47-790 MHz)
• Open casing guaranteeing high level of shielding - class A
Multiswitch MV-932L TERRA Class A, 9-input, 32-output with active terrestrial - without power supply
Multiswitch MV932 9 in/32 output without power supply and active terrestrial TV path dedicated for medium and large installations with distribution of RTV/SAT signals.
• Radial multiswitch
• 32 outputs
• Built-in cable pre-correction
• Grouping of outputs according to output level
• Separation between inputs greater than 30 dB
• Preamplifier feed for terrestrial antenna
• Active terrestrial signal path equipped with LTE filter (47-790 MHz)
• Open casing guaranteeing high level of shielding - class A
• 32 outputs
• Built-in cable pre-correction
• Grouping of outputs according to output level
• Separation between inputs greater than 30 dB
• Preamplifier feed for terrestrial antenna
• Active terrestrial signal path equipped with LTE filter (47-790 MHz)
• Open casing guaranteeing high level of shielding - class A
The SA-91L amplifier (with power supply) is designed for use in multiswitch installations. It is equipped with four satellite inputs and one DVB-T/T2/Radio input.
• IF signal boosting and levelling for 8 polarisation-band pairs
• DVB-T/T2 and radio signal boosting and levelling
• LTE signal attenuation (band > 790 MHz)
• Compensation of attenuation characteristics of coaxial cable
• Powering other elements of the installation, such as: LNBs, DVB-T/T2 preamplifiers, multiswitches or other bus amplifiers
• Cast housings guaranteeing a high level of shielding - Class A
• DVB-T/T2 and radio signal boosting and levelling
• LTE signal attenuation (band > 790 MHz)
• Compensation of attenuation characteristics of coaxial cable
• Powering other elements of the installation, such as: LNBs, DVB-T/T2 preamplifiers, multiswitches or other bus amplifiers
• Cast housings guaranteeing a high level of shielding - Class A
The SA-91DL amplifier (without power supply) is designed for use in multiswitch installations. It is equipped with four satellite inputs and one DVB-T/T2/Radio input.
• IF signal boosting and levelling for 8 polarisation-band pairs
• DVB-T/T2 and radio signal boosting and levelling
• LTE signal attenuation (band > 790 MHz)
• Compensation of attenuation characteristics of coaxial cable
• Powering other elements of the installation, such as LNBs, DVB-T/T2 preamplifiers, multiswitches or other bus amplifiers (in the case of connecting 18 V DC power supply)
• Open casing guaranteeing high level of shielding - class A
• DVB-T/T2 and radio signal boosting and levelling
• LTE signal attenuation (band > 790 MHz)
• Compensation of attenuation characteristics of coaxial cable
• Powering other elements of the installation, such as LNBs, DVB-T/T2 preamplifiers, multiswitches or other bus amplifiers (in the case of connecting 18 V DC power supply)
• Open casing guaranteeing high level of shielding - class A
The SIGNAL 18 VDC / 1 A R71451 power supply is dedicated for multiswitches from the MRP series. The cable is terminated with F plug.
• AC input 100...240 V, 50/60 Hz
• DC output 18 V, 1 A
• Output: F plug
• Recommended for MRP series multiswitches
• DC output 18 V, 1 A
• Output: F plug
• Recommended for MRP series multiswitches
The SIGNAL 2A 18 VDC R71455 power supply is intended for powering MRP and TERRA MV/MS multiswitches. The output is terminated with F male connector.
• AC input 100...240 V, 50/60 Hz
• DC output 18 V, 2 A
• Output: F plug
• Recommended for MRP, MS and MV series multiswitches
• DC output 18 V, 2 A
• Output: F plug
• Recommended for MRP, MS and MV series multiswitches
SIGNAL PRO impulse power supply intended for supplying devices requiring 20 V DC voltage, equipped with an F-type connector.
• Stable output voltage DC 20 V
• Current capacity 2.5 A
• Power supply to devices via coaxial cable
• High level of protection and reliability
• Current capacity 2.5 A
• Power supply to devices via coaxial cable
• High level of protection and reliability
The PS182F 2 A 18 V switched-mode power supply is designed for TERRA's MRP and MV/MS multiswitches, equipped with an F connector.
• AC input 180...240 V, 50 Hz
• DC output 18 V, 2 A
• Output: F-plug
• Recommended for MRP, MS and MV series multiswitches
• DC output 18 V, 2 A
• Output: F-plug
• Recommended for MRP, MS and MV series multiswitches
The PS202F 2 A 20 V switched-mode power supply is designed for TERRA dSCR multiswitches, equipped with an F connector.
• AC input 180...240 V, 50 Hz
• DC 20 V, 2 A output
• Output: F-plug
• Recommended for dSCR/Unicable series multiswitches
• DC 20 V, 2 A output
• Output: F-plug
• Recommended for dSCR/Unicable series multiswitches
Power supply with a DC voltage of 12 V and a current capacity of 1 A.
• Output voltage: DC 12 V
• Current capacity: 1 A
• Current capacity: 1 A
The ZMB-1-800 side-mounting unit is used for vertical mounting of equipment. It is mounted on the front and rear RACK rails (left or right).
• Enables installation of multiswitch components in a RACK cabinet
• Side mounting allows to save space in the rack
• Dedicated to Terra MV series multiswitches
• Material: aluminium PA11
• Colour: black
• Side mounting allows to save space in the rack
• Dedicated to Terra MV series multiswitches
• Material: aluminium PA11
• Colour: black
The ZMC-1 module is a 380 mm long EURO TH35 rail set back 100 mm from the front of the rack. The carrier is made of PA11 aluminium sheet, 2 mm thick.
• Allows to mount different types of equipment in RACK cabinet
• Front installation
• EURO TH35 rail included
• Dedicated for Terra channel DVB-T amplifiers
• Material: alluminium PA11
• Colour: black
• Front installation
• EURO TH35 rail included
• Dedicated for Terra channel DVB-T amplifiers
• Material: alluminium PA11
• Colour: black
The ZMC-2 module is used when devices intended for vertical mounting can be placed alongside a small number of EURO rail-mounted devices.
• Enables installation of TV and non-TV components in a RACK cabinet
• Front-mounted
• Built-in EURO TH35 rail
• Universal - possibility of installing elements with different way of fastening
• 2 holes for Keystone connectors
• Material: aluminium PA11
• Colour: black
• Front-mounted
• Built-in EURO TH35 rail
• Universal - possibility of installing elements with different way of fastening
• 2 holes for Keystone connectors
• Material: aluminium PA11
• Colour: black
In the ZMC-3 module of the vertical RACK board mounting system, a panel with 12 keystone module slots is placed next to a short (190 mm) EURO rail.
• Enables installation of TV and non-TV components in a RACK cabinet
• Front-mounted
• Built-in EURO TH35 rail
• Universal - possibility of installing elements with different way of fastening
• 12 holes for Keystone connectors
• Material: aluminium PA11
• Colour: black
• Front-mounted
• Built-in EURO TH35 rail
• Universal - possibility of installing elements with different way of fastening
• 12 holes for Keystone connectors
• Material: aluminium PA11
• Colour: black
The ZMC-4 module of the vertical mounting system RACK board is a panel with dimensions of 380 x 170 mm, set back 100 mm from the front of the rack.
• Enables installation of low-current and non-low-current components in a RACK
• Front-mounting
• Universal - possibility of assembling elements with different ways of fastening
• Material: aluminium PA11
• Colour: black
• Front-mounting
• Universal - possibility of assembling elements with different ways of fastening
• Material: aluminium PA11
• Colour: black
Front assembly component ZMD-1 R77311 is composed of two elements. It has holes dedicated for mounting TERRA MR-xxx/MV-xxx multiswitches.
• Enables installation of multiswitch components in a RACK cabinet
• Front mounted
• Dedicated to Terra MR series multiswitches
• Material: aluminium PA11
• Colour: black
• Front mounted
• Dedicated to Terra MR series multiswitches
• Material: aluminium PA11
• Colour: black
The RACK board ZMD-2 front-mounting unit is a set of two carriers intended for mounting in a RACK cabinet.
• Enables installation of non-current components in a RACK
• Front-mounted
• Dedicated to RTV/SAT elements
• Material: aluminium PA11
• Colour: black
• Front-mounted
• Dedicated to RTV/SAT elements
• Material: aluminium PA11
• Colour: black
The ZMD-35 module is a TH35 EURO rail with a length of 430 mm, set back 100 mm from the front of the rack.
• Enables installation of TV and non-TV components in a RACK cabinet
• Front-mounted
• Built-in EURO TH35 rail
• Dedicated for transmodulators, amplifiers and other elements
• Material: aluminium PA11
• Colour: black
• Front-mounted
• Built-in EURO TH35 rail
• Dedicated for transmodulators, amplifiers and other elements
• Material: aluminium PA11
• Colour: black
KWM-510 M5 x 10 screws are used to screw the unit to the RACK board panel.
• For screwing the unit to a RACK board panel
Multiswitch SRM522 5in/2output without power supply and passive terrestrial TV path dedicated for RTV/SAT installations supporting dSCR/Unicable system.
• Multiswitch dedicated to work with Unicable I/II receivers
• Number of outputs: 2xdSCR/Legacy
• Built-in AGC in the SAT path
• Passive terrestrial path.
• Compatible with Quatro and WideBand LNBs - reducing the number of input cables
• Fully compliant with EN50494 - Unicable I, 8 UB - User Bands (8 channels)
• Fully compliant with EN50607 - Unicable II, 32 UB - User Bands (32 channels)
• It is possible to mix receivers supporting EN50607 and EN50494
• In dynamic mode, it allows division to signal up to max. 32 receivers
• Number of outputs: 2xdSCR/Legacy
• Built-in AGC in the SAT path
• Passive terrestrial path.
• Compatible with Quatro and WideBand LNBs - reducing the number of input cables
• Fully compliant with EN50494 - Unicable I, 8 UB - User Bands (8 channels)
• Fully compliant with EN50607 - Unicable II, 32 UB - User Bands (32 channels)
• It is possible to mix receivers supporting EN50607 and EN50494
• In dynamic mode, it allows division to signal up to max. 32 receivers
Multiswitch SRM523 5 in/2 output without power supply and active terrestrial TV path dedicated for RTV/SAT installations based on dSCR/Unicable system.
• Multiswitch dedicated to work with Unicable I/II receivers
• Number of outputs: 2xdSCR/Legacy
• Built-in AGC in the SAT path
• Active terrestrial TV path
• Works with Quatro type converter
• Fully compliant with EN50494 - Unicable I, 8 UB - User Bands (8 channels)
• Fully compliant with EN50607 - Unicable II, 32 UB - User Bands (32 channels)
• It is possible to mix receivers supporting EN50607 and EN50494
• In dynamic mode, allows sharing to signal up to max. 32 receivers
• Number of outputs: 2xdSCR/Legacy
• Built-in AGC in the SAT path
• Active terrestrial TV path
• Works with Quatro type converter
• Fully compliant with EN50494 - Unicable I, 8 UB - User Bands (8 channels)
• Fully compliant with EN50607 - Unicable II, 32 UB - User Bands (32 channels)
• It is possible to mix receivers supporting EN50607 and EN50494
• In dynamic mode, allows sharing to signal up to max. 32 receivers
Multiswitch SRM524 5in/2output (quatro/wideband) without power supply and active terrestrial TV path dedicated for RTV/SAT installations supporting dSCR/Unicable system.
• Multiswitch dedicated to work with Unicable I/II receivers
• Number of outputs: 2xdSCR/Legacy
• Built-in AGC in RTV/SAT path
• Active terrestrial TV path
• Built-in LNB type switch: Quatro and WideBand - reducing the number of input cables
• Fully compliant with EN50494 - Unicable I, 8 UB - User Bands (8 channels)
• Fully compliant with EN50607 - Unicable II, 32 UB - User Bands (32 channels)
• It is possible to mix receivers supporting EN50607 and EN50494
• In dynamic mode, it allows division to signal up to max. 32 receivers
• Number of outputs: 2xdSCR/Legacy
• Built-in AGC in RTV/SAT path
• Active terrestrial TV path
• Built-in LNB type switch: Quatro and WideBand - reducing the number of input cables
• Fully compliant with EN50494 - Unicable I, 8 UB - User Bands (8 channels)
• Fully compliant with EN50607 - Unicable II, 32 UB - User Bands (32 channels)
• It is possible to mix receivers supporting EN50607 and EN50494
• In dynamic mode, it allows division to signal up to max. 32 receivers
Multiswitch SRM543 5in/4output without power supply and active terrestrial TV path dedicated for RTV/SAT installations supporting dSCR/Unicable system.
• Multiswitch dedicated to work with Unicable I/II receivers
• Number of outputs: 4xdSCR/Legacy
• Built-in AGC in the SAT path
• Active terrestrial path
• Compatible with Quatro type converters
• Fully compliant with EN50494 - Unicable I, 8 UB - User Bands (8 channels)
• Fully compliant with EN50607 - Unicable II, 32 UB - User Bands (32 channels)
• It is possible to mix receivers supporting EN50607 and EN50494
• In dynamic mode, it allows division to signal up to max. 32 receivers
• Number of outputs: 4xdSCR/Legacy
• Built-in AGC in the SAT path
• Active terrestrial path
• Compatible with Quatro type converters
• Fully compliant with EN50494 - Unicable I, 8 UB - User Bands (8 channels)
• Fully compliant with EN50607 - Unicable II, 32 UB - User Bands (32 channels)
• It is possible to mix receivers supporting EN50607 and EN50494
• In dynamic mode, it allows division to signal up to max. 32 receivers
Multiswitch SRM544 5-in/4-out (quatro/wideband) without power supply and with active terrestrial TV path dedicated for RTV/SAT installations supporting dSCR/Unicable system.
• Multiswitch dedicated to work with Unicable I/II receivers
• Number of outputs: 4xdSCR/Legacy
• Built-in AGC in RTV/SAT path
• Active terrestrial TV path
• Built-in LNB type switch: Quatro and WideBand - reducing the number of input cables.
• Fully compliant with EN50494 - Unicable I, 8 UB - User Bands (8 channels)
• Fully compliant with EN50607 - Unicable II, 32 UB - User Bands (32 channels)
• It is possible to mix receivers supporting EN50607 and EN50494
• In dynamic mode, allows sharing to signal up to max. 32 receivers
• Number of outputs: 4xdSCR/Legacy
• Built-in AGC in RTV/SAT path
• Active terrestrial TV path
• Built-in LNB type switch: Quatro and WideBand - reducing the number of input cables.
• Fully compliant with EN50494 - Unicable I, 8 UB - User Bands (8 channels)
• Fully compliant with EN50607 - Unicable II, 32 UB - User Bands (32 channels)
• It is possible to mix receivers supporting EN50607 and EN50494
• In dynamic mode, allows sharing to signal up to max. 32 receivers
The SA004 TERRA amplifier is designed to compensate for losses introduced by cables in wideband SAT IF networks.
• Broadband amplifier designed for WideBand installations
• Amplification 14...24 dB
• Constant current pass max. 20 V/1.5 A
• F-type connectors
• Open housing
• Amplification 14...24 dB
• Constant current pass max. 20 V/1.5 A
• F-type connectors
• Open housing
The PC102W programmer is a device designed to configure and manage TERRA multiswitches based on the dSCR/Unicable system.
• Programmer is used to configure and manage dSCR/Unicable TERRA multiswitches
• Wireless access via WiFi from any device - tablets, smartphones, laptops, computers
• Quick and intuitive configuration using a web browser
• Wireless access via WiFi from any device - tablets, smartphones, laptops, computers
• Quick and intuitive configuration using a web browser
Multiswitch SRQ564 5-in/6-out (quatro/wideband) without power supply and with active terrestrial TV path, dedicated for RTV/SAT installations supporting the dSCR/Unicable system.
• Multiswitch dedicated to work with Unicable I/II receivers
• Number of outputs: 6xdSCR/Legacy
• Built-in AGC in the RTV/SAT path
• Active terrestrial TV path
• Built-in LNB type switch: Quatro and WideBand - reducing the number of input cables
• Fully compliant with EN50494 - Unicable I, 8 UB - User Bands (8 channels)
• Fully compliant with EN50607 - Unicable II, 32 UB - User Bands (32 channels)
• It is possible to mix receivers supporting EN50607 and EN50494
• In dynamic mode, allows sharing to signal up to max. 32 receivers
• Number of outputs: 6xdSCR/Legacy
• Built-in AGC in the RTV/SAT path
• Active terrestrial TV path
• Built-in LNB type switch: Quatro and WideBand - reducing the number of input cables
• Fully compliant with EN50494 - Unicable I, 8 UB - User Bands (8 channels)
• Fully compliant with EN50607 - Unicable II, 32 UB - User Bands (32 channels)
• It is possible to mix receivers supporting EN50607 and EN50494
• In dynamic mode, allows sharing to signal up to max. 32 receivers
Multiswitch SRM581 5-in/8-out (quatro/wideband) without power supply and active terrestrial TV path dedicated for RTV/SAT installations supporting dSCR/Unicable system.
• Multiswitch dSCR/Unicable
• Compatible with WideBand converters
• 2 satellite positions - 4 coaxial cables
• 4 pairs Legacy or Unicable outputs
• Capable of connecting up to 128 receivers
• Built-in AGC system
• Possibility to use programmer to change default settings
• Screening class A
• Compatible with WideBand converters
• 2 satellite positions - 4 coaxial cables
• 4 pairs Legacy or Unicable outputs
• Capable of connecting up to 128 receivers
• Built-in AGC system
• Possibility to use programmer to change default settings
• Screening class A
Multiswitch SRM584 5-in/8-out (quatro/wideband) without power supply and with active terrestrial TV path, dedicated for RTV/SAT installations supporting the dSCR/Unicable system.
• Multiswitch dedicated to work with Unicable I/II receivers
• Number of outputs: 8xdSCR/Legacy
• Built-in AGC in the RTV/SAT path
• Active terrestrial TV path
• Built-in LNB type switch: Quatro and WideBand - reducing the number of input cables
• Fully compliant with EN50494 - Unicable I, 8 UB - User Bands (8 channels)
• Fully compliant with EN50607 - Unicable II, 32 UB - User Bands (32 channels)
• It is possible to mix receivers supporting EN50607 and EN50494
• In dynamic mode, allows division to signal up to max. 32 receivers
• Number of outputs: 8xdSCR/Legacy
• Built-in AGC in the RTV/SAT path
• Active terrestrial TV path
• Built-in LNB type switch: Quatro and WideBand - reducing the number of input cables
• Fully compliant with EN50494 - Unicable I, 8 UB - User Bands (8 channels)
• Fully compliant with EN50607 - Unicable II, 32 UB - User Bands (32 channels)
• It is possible to mix receivers supporting EN50607 and EN50494
• In dynamic mode, allows division to signal up to max. 32 receivers
The HSA001R6 is a satellite amplifier with an active terrestrial TV path equipped with a passive return channel.
• Strengthening of terrestrial and satellite TV signals
• DiSEqC and DC voltage transmission possible
• Adjustable gain for each TV channel
• Open casing inside a compact plastic housing
• DiSEqC and DC voltage transmission possible
• Adjustable gain for each TV channel
• Open casing inside a compact plastic housing
3U voltage distribution panel with DIN rail, for mounting S-type electrical modules and other modular equipment components.
• Height: 3U
• DIN rail
• Possible to install up to 23 "S" type modules
• DIN rail
• Possible to install up to 23 "S" type modules
The active RTA-120 splitter is a high-quality element of the antenna installation, designed to split the signal between two television receivers.
• Splitting signal into 2 receivers without compromising picture and sound quality
• Operating frequency range: 47-862 MHz - stable operation over a wide frequency band
• Gain control
• High output separation to minimise interference between connected devices
• Low signal attenuation - stable reception of terrestrial DVB-T2 and cable TV
• Power supply via coaxial cable from the output side (OUT)
• Possibility to transfer power voltage from output (OUT) to input (IN)
• Robust, compact metal casing - easy installation even in limited space
• Operating frequency range: 47-862 MHz - stable operation over a wide frequency band
• Gain control
• High output separation to minimise interference between connected devices
• Low signal attenuation - stable reception of terrestrial DVB-T2 and cable TV
• Power supply via coaxial cable from the output side (OUT)
• Possibility to transfer power voltage from output (OUT) to input (IN)
• Robust, compact metal casing - easy installation even in limited space
The active RTA-140 splitter is a high-quality element of the antenna installation, designed to divide the signal into four television receivers.
• Splitting signal into 4 receivers without compromising picture and sound quality
• Operating frequency range: 47-862 MHz - stable operation over a wide frequency band
• Gain control
• High output separation to minimise interference between connected devices
• Low signal attenuation - stable reception of terrestrial DVB-T2 and cable TV
• Power supply via coaxial cable from the output side (OUT)
• Possibility to transfer power voltage from output (OUT) to input (IN)
• Robust, compact metal casing - easy installation even in limited space
• Operating frequency range: 47-862 MHz - stable operation over a wide frequency band
• Gain control
• High output separation to minimise interference between connected devices
• Low signal attenuation - stable reception of terrestrial DVB-T2 and cable TV
• Power supply via coaxial cable from the output side (OUT)
• Possibility to transfer power voltage from output (OUT) to input (IN)
• Robust, compact metal casing - easy installation even in limited space
The AWS-1036 (1 input) is designed for RTV installations. The unit has 4 independently adjustable outputs.
• Inputs: 1: 87-790 MHz
• Number of outputs: 4
• Maximum gain: 23 dB
• Maximum output signal level: 100 dBμV
• Gain adjustment range: 14 dB
• Capable of feeding an antenna preamplifier
• Number of outputs: 4
• Maximum gain: 23 dB
• Maximum output signal level: 100 dBμV
• Gain adjustment range: 14 dB
• Capable of feeding an antenna preamplifier
The AWS-1141 (1 input, 1 output) is intended for use in RTV installations. The unit has the capability of supplying the preamplifiers with 12 V DC.
• Inputs: 1: 47-790 MHz
• Number of outputs: 1
• Maximum gain: 21 dB
• Maximum output signal level: 106 dBμV
• Gain adjustment range: 10 dB
• Capable of feeding an antenna preamplifier
• Number of outputs: 1
• Maximum gain: 21 dB
• Maximum output signal level: 106 dBμV
• Gain adjustment range: 10 dB
• Capable of feeding an antenna preamplifier
The AWS-1142 (1 input, 2 outputs) is intended for use in RTV installations. The unit has the capability of supplying the preamplifiers with 12 V DC.
• Inputs: 1: 87-790 MHz
• Number of outputs: 2
• Maximum gain: 19 dB
• Maximum output signal level: 104 dBμV
• Gain adjustment range: 10 dB
• Capable of feeding an antenna preamplifier
• Number of outputs: 2
• Maximum gain: 19 dB
• Maximum output signal level: 104 dBμV
• Gain adjustment range: 10 dB
• Capable of feeding an antenna preamplifier
The AWS-1143 (1 input, 3 outputs) is intended for use in RTV installations. It is capable of supplying preamplifiers with 12 V DC.
• Inputs: 1: 87-790 MHz
• Number of outputs: 3
• Max. gain: 19 dB
• Max. output level power: 104 dBμV
• Gain adjustment: 10 dB
• Preamplifier power supply
• Number of outputs: 3
• Max. gain: 19 dB
• Max. output level power: 104 dBμV
• Gain adjustment: 10 dB
• Preamplifier power supply
The AWS-1144 (1 input, 4 outputs) is intended for use in RTV installations. The unit has the capability of supplying the preamplifiers with 12 V DC.
• Inputs: 1: 87-790 MHz
• Number of outputs: 4
• Maximum gain: 15 dB
• Maximum output signal level: 100 dBμV
• Gain adjustment range: 10 dB
• Capable of feeding an antenna preamplifier
• Number of outputs: 4
• Maximum gain: 15 dB
• Maximum output signal level: 100 dBμV
• Gain adjustment range: 10 dB
• Capable of feeding an antenna preamplifier
The AWS-141M (1 input, 1 output) is designed for RTV installations. Automatic power supply function for 12 V DC preamplifiers.
• Inputs: 1: 87-774 MHz
• Number of outputs: 1
• Maximum gain: 20 dB
• Maximum output signal level: 112 dBμV
• Gain adjustment range: 14 dB
• Capable of feeding an antenna preamplifier
• Number of outputs: 1
• Maximum gain: 20 dB
• Maximum output signal level: 112 dBμV
• Gain adjustment range: 14 dB
• Capable of feeding an antenna preamplifier
The AWS-142M (1 input, 2 outputs) is intended for use in RTV installations. Automatic power supply function for 12 V DC preamplifiers.
• Inputs: 1: 87-774 MHz
• Number of outputs: 2
• Maximum gain: 20 dB
• Maximum output signal level: 101 dBμV
• Gain adjustment range: 15 dB
• Capable of feeding an antenna preamplifier
• Number of outputs: 2
• Maximum gain: 20 dB
• Maximum output signal level: 101 dBμV
• Gain adjustment range: 15 dB
• Capable of feeding an antenna preamplifier
The AWS-143M (1 input, 3 outputs) is intended for use in RTV installations. Automatic power supply function for 12 V DC preamplifiers.
• Inputs: 1: 87-774 MHz
• Number of outputs: 3
• Maximum gain: 20 dB
• Maximum output signal level: 103 dBμV
• Gain adjustment range: 15 dB
• Capable of feeding an antenna preamplifier
• Number of outputs: 3
• Maximum gain: 20 dB
• Maximum output signal level: 103 dBμV
• Gain adjustment range: 15 dB
• Capable of feeding an antenna preamplifier
The AWS-144M (1 input, 4 outputs) is intended for use in RTV installations. Automatic power supply function for 12 V DC preamplifiers.
• Inputs: 1: 87-774 MHz
• Number of outputs: 4
• Maximum gain: 17 dB
• Maximum output level: 100 dBμV
• Gain adjustment range: 14 dB
• Possibility to power an antenna preamplifier
• Number of outputs: 4
• Maximum gain: 17 dB
• Maximum output level: 100 dBμV
• Gain adjustment range: 14 dB
• Possibility to power an antenna preamplifier
The AWS-1241 (1 input, 1 output) is intended for use in RTV installations. The device has a possibility of powering preamplifiers with 12 V DC. Gain 28...31 dB.
• Inputs: 1: 87-790 MHz
• Number of outputs: 1
• Maximum gain: 31 dB
• Maximum output signal level: 109 dBμV
• Gain adjustment range: 12 dB
• Capable of feeding an antenna preamplifier
• Number of outputs: 1
• Maximum gain: 31 dB
• Maximum output signal level: 109 dBμV
• Gain adjustment range: 12 dB
• Capable of feeding an antenna preamplifier
The AWS-1242 (1 input, 2 outputs) is intended for use in RTV installations. The device has the possibility of supplying preamplifiers with 12 V DC. Gain 25...27 dB.
• Inputs: 1: 87-790 MHz
• Number of outputs: 2
• Maximum gain: 27 dB
• Maximum output signal level: 105 dBμV
• Gain adjustment range: 12 dB
• Capable of feeding an antenna preamplifier
• Number of outputs: 2
• Maximum gain: 27 dB
• Maximum output signal level: 105 dBμV
• Gain adjustment range: 12 dB
• Capable of feeding an antenna preamplifier
The AWS-1243 (1 input, 3 outputs) is intended for use in RTV installations. The device has a possibility of powering preamplifiers with 12 V DC. Gain 24...26 dB.
• Inputs: 1: 87-790 MHz
• Number of outputs: 3
• Maximum gain: 26 dB
• Maximum output signal level: 104 dBμV
• Gain adjustment range: 12 dB
• Capable of feeding an antenna preamplifier
• Number of outputs: 3
• Maximum gain: 26 dB
• Maximum output signal level: 104 dBμV
• Gain adjustment range: 12 dB
• Capable of feeding an antenna preamplifier
The AWS-1244 (1 input, 4 outputs) is intended for use in RTV installations. The device has a possibility of supplying preamplifiers with 12 V DC. Gain 21...23 dB.
• Inputs: 1: 47-862 MHz
• Number of outputs: 4
• Maximum gain: 23 dB
• Maximum output signal level: 101 dBμV
• Gain adjustment range: 12 dB
• Capable of feeding an antenna preamplifier
• Number of outputs: 4
• Maximum gain: 23 dB
• Maximum output signal level: 101 dBμV
• Gain adjustment range: 12 dB
• Capable of feeding an antenna preamplifier
The APL-102 amplifier is designed to amplify weak FM/DAB+ and VHF DVB-T/T2 signals. Gain 25 dB. Powered by 12 V DC.
• Suitable for outdoor use
• Number of inputs: 1
• Number of outputs: 1
• Band: 87 - 230 MHz
• Gain: 25 dB
• Max. signal output level: 97 dBμV
• Number of inputs: 1
• Number of outputs: 1
• Band: 87 - 230 MHz
• Gain: 25 dB
• Max. signal output level: 97 dBμV
The LNA169-5G 24 dB antenna box amplifier is designed for the reception of DVB-T2 digital terrestrial television signals.
• Suitable for all antennas manufactured by DIPOL
• Operating band: 174 - 694 MHz
• Max. gain: 24 dB
• High resistance to interfering signals: FM radio, CB, GSM telephony, LTE800, GSM900, Wi-Fi, Bluetooth, LTE
• Operating band: 174 - 694 MHz
• Max. gain: 24 dB
• High resistance to interfering signals: FM radio, CB, GSM telephony, LTE800, GSM900, Wi-Fi, Bluetooth, LTE
The LNA177-5G 27 dB antenna box amplifier is designed for reception of DVB-T2 digital terrestrial television signals.
• Suitable for all antennas manufactured by DIPOL
• Operating band: 174 - 694 MHz
• Max. gain: 27 dB
• High resistance to interfering signals: FM radio, CB, GSM telephony, LTE800, GSM900, Wi-Fi, Bluetooth, LTE
• Operating band: 174 - 694 MHz
• Max. gain: 27 dB
• High resistance to interfering signals: FM radio, CB, GSM telephony, LTE800, GSM900, Wi-Fi, Bluetooth, LTE
The LNA188-5G 32 dB antenna box amplifier is designed for the reception of DVB-T2 digital terrestrial television signals.
• Suitable for all antennas manufactured by DIPOL
• Operating band: 174 - 694 MHz
• Max. gain: 32 dB
• High resistance to interfering signals: FM radio, CB, GSM telephony, LTE800, GSM900, Wi-Fi, Bluetooth, LTE
• Operating band: 174 - 694 MHz
• Max. gain: 32 dB
• High resistance to interfering signals: FM radio, CB, GSM telephony, LTE800, GSM900, Wi-Fi, Bluetooth, LTE
The APL-109e amplifier is designed to amplify weak DAB+ and DVB-T/T2 signals. Gain 27/29 dB. Powered by 12 V DC.
• Capable of being mounted outdoors
• Number of inputs: 1
• Number of outputs: 1
• Operating band: 174 - 790 MHz
• Maximum gain: 28 dB
• Maximum output signal level: 100 dBμV
• Number of inputs: 1
• Number of outputs: 1
• Operating band: 174 - 790 MHz
• Maximum gain: 28 dB
• Maximum output signal level: 100 dBμV
The APL-107e amplifier is designed to amplify weak DAB+ and DVB-T/T2 signals. Gain 21/23 dB. Powered by 12 V DC.
• Capable of being mounted outdoors
• Number of inputs: 1
• Number of outputs: 1
• Operating band: 174 - 790 MHz
• Maximum gain: 23 dB
• Maximum output signal level: 100 dBμV
• Number of inputs: 1
• Number of outputs: 1
• Operating band: 174 - 790 MHz
• Maximum gain: 23 dB
• Maximum output signal level: 100 dBμV
The APL-103e amplifier is designed to amplify weak DAB+ and DVB-T/T2 signals. Gain 10/14 dB. Powered by 12 V DC.
• Capable of being mounted outdoors
• Number of inputs: 1
• Number of outputs: 1
• Operating band: 174 - 790 MHz
• Maximum gain: 14 dB
• Maximum output signal level: 100 dBμV
• Number of inputs: 1
• Number of outputs: 1
• Operating band: 174 - 790 MHz
• Maximum gain: 14 dB
• Maximum output signal level: 100 dBμV
The APL-104 amplifier is designed to amplify weak FM/DAB+ and DVB-T/T2 signals. Gain of 18...23 dB. Powered with 12 V DC.
• Can be mounted outdoors
• Number of inputs: 1
• Number of outputs: 1
• Operating band: 87-790 MHz
• Maximum gain: 23 dB
• Maximum output signal level: 95 dBμV
• Number of inputs: 1
• Number of outputs: 1
• Operating band: 87-790 MHz
• Maximum gain: 23 dB
• Maximum output signal level: 95 dBμV
Amplifier designed for FM signals in the 88-108 MHz range.
• Capable of being mounted outdoors
• Number of inputs: 1
• Number of outputs: 1
• Operating band: 88 - 108 MHz
• Maximum gain: 18 dB
• Maximum output signal level: 100 dBμV
• Number of inputs: 1
• Number of outputs: 1
• Operating band: 88 - 108 MHz
• Maximum gain: 18 dB
• Maximum output signal level: 100 dBμV
The PR-310 amplifier is used to amplify RTV/SAT signals in the 5 - 2400 MHz band.
• Gain 10 dB
• It amplifies all bands: FM/DAB+, DVB-T2, DVB-S/S2
• Frequency range 5-2400 MHz
• DC pass-through 13 V/18 V 500 mA
• It amplifies all bands: FM/DAB+, DVB-T2, DVB-S/S2
• Frequency range 5-2400 MHz
• DC pass-through 13 V/18 V 500 mA
The AZS-02 separator supplies DC power to antenna amplifier/s in situations when it is not possible using a typical power supply with a built-in DC injector.
• Bandwidth: 5 - 1000 MHz
• Maximum voltage value: 24 V
• Maximum current value: 300 mA
• 3.5 mm JACK socket
• Maximum voltage value: 24 V
• Maximum current value: 300 mA
• 3.5 mm JACK socket
The PS-1 antenna power supply unit is used to supply DC 12 V to antenna amplifiers with a maximum current consumption of 300 mA.
• DC 12 V / max. 300 mA
• LED monitoring
• Easy connection via F-type connectors
• LED monitoring
• Easy connection via F-type connectors
This power supply unit is designed to supply 12 VDC to terrestrial TV antenna amplifiers and preamplifiers with a current draw of up to 100 mA.
• Type: switched-mode
• Input voltage: AC 100-230 V 50/60 Hz
• Output voltage: DC 12 V
• Max. output current: 100 mA
• TV output: IEC plug
• Input voltage: AC 100-230 V 50/60 Hz
• Output voltage: DC 12 V
• Max. output current: 100 mA
• TV output: IEC plug
The power supply is designed to supply DC 12 V to terrestrial TV antenna amplifiers and preamplifiers with a current consumption of up to 100 mA.
• Type: transformer
• Input voltage: AC 230 V 50 Hz
• Output voltage: DC 12 V
• Max. output current: 100 mA
• Power supply: AC 13 V/20 mA
• TV output: IEC plug
• Input voltage: AC 230 V 50 Hz
• Output voltage: DC 12 V
• Max. output current: 100 mA
• Power supply: AC 13 V/20 mA
• TV output: IEC plug
Switched-mode power supply used to power antenna amplifiers via power separators.
• Type: switched-mode
• Input voltage: AC 100...230 V 50/60 Hz
• Output voltage: DC 12 V
• Max. output current: 300 mA
• Input voltage: AC 100...230 V 50/60 Hz
• Output voltage: DC 12 V
• Max. output current: 300 mA
The power supply is designed to supply DC 12 V to terrestrial TV antenna amplifiers and preamplifiers with a current consumption of up to 300 mA.
• Type: pulsed
• Input voltage: AC 230 V 50 Hz
• Output voltage: DC 12 V
• Max. output current: 300 mA
• TV output: IEC plug
• Cable connection: F-type connector
• Input voltage: AC 230 V 50 Hz
• Output voltage: DC 12 V
• Max. output current: 300 mA
• TV output: IEC plug
• Cable connection: F-type connector
Terra's HS-004T house amplifier is dedicated for use in shared antenna systems with several tens outlets.
• Integrated filter for LTE 700 signal
• 39 dB gain in the FM and BIII bands; 44 dB gain in UHF band
• Switching between gain stages using discrete switches
• Additional, smooth gain control with potentiometers
• Smooth slope adjustment for the gain pattern
• Switchable (ON/OFF) 12 VDC/100 mA power supply to a preamplifier
• Die-cast housing for highly efficient screening to prevent the penetration of interfering signals into the unit
• 39 dB gain in the FM and BIII bands; 44 dB gain in UHF band
• Switching between gain stages using discrete switches
• Additional, smooth gain control with potentiometers
• Smooth slope adjustment for the gain pattern
• Switchable (ON/OFF) 12 VDC/100 mA power supply to a preamplifier
• Die-cast housing for highly efficient screening to prevent the penetration of interfering signals into the unit
The AB011T mast amplifier is a device designed for individual installations or small community installations for a dozen or so outlets, e.g. in single-family houses.
• Power supply 4.5-12 V 60 mA
• LTE signal attenuation (> 694 MHz)
• 26 dB gain in the 470-694 MHz band
• Gain control (switch)
• Small size cast metal case put into compact size plastic housing
• LTE signal attenuation (> 694 MHz)
• 26 dB gain in the 470-694 MHz band
• Gain control (switch)
• Small size cast metal case put into compact size plastic housing
The MA-049T house amplifier is a device designed for individual or community installations, e.g. in single-family houses, multi-family buildings.
• Integrated filter LTE 700 signal attenuation
• 30 dB gain in the FM and VHF bands; 34 dB gain in UHF band
• Switchable (ON/OFF) 12 VDC/60 mA power supply to a preamplifier
• Die-cast housing for highly efficient screening to prevent the penetration of interfering signals into the unit
• 30 dB gain in the FM and VHF bands; 34 dB gain in UHF band
• Switchable (ON/OFF) 12 VDC/60 mA power supply to a preamplifier
• Die-cast housing for highly efficient screening to prevent the penetration of interfering signals into the unit
Terra's MA050T house amplifier is dedicated for use in shared antenna systems with several outlets, for example in single- or multi-family buildings.
• Built-in cable pre-correction
• integrated LTE 700 signal attenuation filter
• 30 dB gain in FM, BIII band and 34 dB gain in UHF band
• On/Off switch allowing 12 volts and 60 mA current to be sent to the antenna preamplifier
• The die-cast housing provides high efficiency shielding to prevent interfering signals from penetrating inside the unit
• integrated LTE 700 signal attenuation filter
• 30 dB gain in FM, BIII band and 34 dB gain in UHF band
• On/Off switch allowing 12 volts and 60 mA current to be sent to the antenna preamplifier
• The die-cast housing provides high efficiency shielding to prevent interfering signals from penetrating inside the unit
Terra’s MA-075T FM/TV house amplifier is dedicated to individual antenna systems and small SMATV systems distributing the signal to tens of outlets.
• Integrated filter LTE 700 signal attenuation
• 35 dB gain in the FM and VHF bands; 47 dB gain in UHF band
• Switchable (ON/OFF) 12 VDC/100 mA power supply to a preamplifier
• Die-cast housing for highly efficient screening to prevent the penetration of interfering signals into the unit
• 35 dB gain in the FM and VHF bands; 47 dB gain in UHF band
• Switchable (ON/OFF) 12 VDC/100 mA power supply to a preamplifier
• Die-cast housing for highly efficient screening to prevent the penetration of interfering signals into the unit
Terra’s MA-076T TERRA FM/TV house amplifier is dedicated large SMATV systems.
• Integrated filter LTE 700 signal attenuation
• Inputs: FM, VHF, 2 x UHF
• 35 dB gain in the FM and VHF bands; 47 dB gain in UHF band
• Switchable (ON/OFF) 12 VDC/100 mA power supply to a preamplifier
• Die-cast housing for highly efficient screening to prevent the penetration of interfering signals into the unit
• Inputs: FM, VHF, 2 x UHF
• 35 dB gain in the FM and VHF bands; 47 dB gain in UHF band
• Switchable (ON/OFF) 12 VDC/100 mA power supply to a preamplifier
• Die-cast housing for highly efficient screening to prevent the penetration of interfering signals into the unit
Masthead antenna amplifier Terra MA080T R81080 is dedicated for outdoor applications in individual antenna systems and small MATV systems distributing the signal to tens of outlets.
• Power supply 12 V 60 mA
• LTE signal attenuation LTE 700 (> 694 MHz)
• 20 dB gain in the FM, VHF band, and 30 dB in UHF band
• Gain control with a potentiometer
• Small size cast metal case put into compact size plastic housing
• LTE signal attenuation LTE 700 (> 694 MHz)
• 20 dB gain in the FM, VHF band, and 30 dB in UHF band
• Gain control with a potentiometer
• Small size cast metal case put into compact size plastic housing
Terra's MA081L mast amplifier is a device designed for individual installations or small community installations for several dozen outlets.
• Power supply 12 V 60 mA
• LTE signal attenuation LTE 700 (> 694 MHz)
• 20 dB gain in the FM, VHF band, and 30 dB in UHF band
• Gain control with a potentiometer
• Small size cast metal case put into compact size plastic housing
• LTE signal attenuation LTE 700 (> 694 MHz)
• 20 dB gain in the FM, VHF band, and 30 dB in UHF band
• Gain control with a potentiometer
• Small size cast metal case put into compact size plastic housing
Terra's MA082T mast amplifier is a device designed for individual installations or small community installations for several dozen outlets.
• Power supply 12 V 60 mA
• LTE signal attenuation LTE 700 (> 694 MHz)
• 20 dB gain in the FM, VHF band, and 30 dB in UHF band
• Gain control with a potentiometer
• Small size cast metal case put into compact size plastic housing
• LTE signal attenuation LTE 700 (> 694 MHz)
• 20 dB gain in the FM, VHF band, and 30 dB in UHF band
• Gain control with a potentiometer
• Small size cast metal case put into compact size plastic housing
The high-power HA-131T house amplifier is designed to amplify radio and TV signals. It is characterised by a high gain of 36 dB.
• 36 dB gain in the 88-694 MHz band
• LTE 700 signal attenuation: (> 694 MHz)
• Die-cast housing
• Smooth gain control
• Smooth slope adjustment for the gain pattern
• Built-in test input -20 dB
• Built-in test output -30 dB
• LTE 700 signal attenuation: (> 694 MHz)
• Die-cast housing
• Smooth gain control
• Smooth slope adjustment for the gain pattern
• Built-in test input -20 dB
• Built-in test output -30 dB
AB010 mast amplifier designed for individual installations or small community installations for several outlets. Gain of 15 dB in the UHF band.
• Ideal for the amplification of strongly noisy signals
• UHF 15 dB boost
• Universal DC 5 V or 12 V power supply
• UHF 15 dB boost
• Universal DC 5 V or 12 V power supply
AB011 mast amplifier designed for individual installations or small community installations for several outlets. Gain of 27 dB in the UHF band.
• Ideal for the amplification of strongly noisy signals
• UHF boost of 27 dB
• Universal DC 5 V or 12 V power supply
• UHF boost of 27 dB
• Universal DC 5 V or 12 V power supply
AB012 mast amplifier designed for individual installations or small community installations for several outlets. Gain of 22 dB in the UHF band.
• Ideal for the amplification of strongly noisy signals
• UHF 22 dB boost
• Universal DC 5 V or 12 V power supply
• UHF 22 dB boost
• Universal DC 5 V or 12 V power supply
MX062 mast amplifier (inputs: FM+VHF, 2xUHF) designed for RF installations. Gain 30...34 dB.
• 12 V / 80 mA power supply
• 30 dB amplification in FM+VHF band
• 34 dB gain in the UHF band
• On/Off switch allowing 12 V to be sent to the antenna preamplifier
• 30 dB amplification in FM+VHF band
• 34 dB gain in the UHF band
• On/Off switch allowing 12 V to be sent to the antenna preamplifier
HS013 amplifier (1 input/2 output) for the FM/VHF/UHF band intended for small and medium-sized RTV installations. 22 dB gain, 12 V DC switch.
• DVB-T antenna amplifier proven in thousands of locations
• Optional 12 VDC supply voltage for an preamplifier
• Max gain of 22 dB
• Gain adjustment range of 12 dB (UHF)
• Maximum output level of 105 dBμV
• Low noise level
• Built-in two way splitter
• Optional 12 VDC supply voltage for an preamplifier
• Max gain of 22 dB
• Gain adjustment range of 12 dB (UHF)
• Maximum output level of 105 dBμV
• Low noise level
• Built-in two way splitter
AB011L mast amplifier with LTE filter designed for RTV installations for several outlets. Gain of 26 dB in the UHF band.
• Flexible supply voltage: 4.5-12 VDC, 60 mA
• 26 dB gain in 470-790 MHz band
• LTE filter (>790 MHz)
• Low noise <1 dB
• Gain switch
• Small size cast metal case put into compact size plastic housing
• 26 dB gain in 470-790 MHz band
• LTE filter (>790 MHz)
• Low noise <1 dB
• Gain switch
• Small size cast metal case put into compact size plastic housing
RF amplifier HS-018T for small to medium-sized radio and television systems. Separate controls for FM/DAB+/VHF and UHF bands.
• Equipped with 1 input and 2 RF outputs
• Maximum gain 26 dB
• Separate adjustment for FM/DAB+/VHF bands in the range 0...15 dB and UHF in the range 0...12 dB
• Built-in cable characteristic pre-correction - achieving higher levels at higher frequencies
• Built-in LTE700 filter - reduces interference from 5G networks
• Signal amplification - improves the quality of terrestrial TV reception
• Application in home installations and small RTV networks
• Maximum gain 26 dB
• Separate adjustment for FM/DAB+/VHF bands in the range 0...15 dB and UHF in the range 0...12 dB
• Built-in cable characteristic pre-correction - achieving higher levels at higher frequencies
• Built-in LTE700 filter - reduces interference from 5G networks
• Signal amplification - improves the quality of terrestrial TV reception
• Application in home installations and small RTV networks
HS016 amplifier (1 in/2 out) for the FM/VHF/UHF band intended for small and medium-sized RF installations. Gain 20...22 dB
• Ideal for amplification of DVB-T and DAB digital radio signals
• Maximum gain 22 dB
• Adjustable gain for VHF and UHF channels
• Maximum output signal level 104 dBμV
• Maximum gain 22 dB
• Adjustable gain for VHF and UHF channels
• Maximum output signal level 104 dBμV
HS004L building amplifier for the VHF (88-230 MHz)/UHF (470-790 MHz) bands. The maximum gain in the VHF band is 39 dB, in the UHF band it is 44 dB.
• Universal amplifier with high gain
• Integrated LTE signal filter
• 39 dB of gain in the VHF band and 44 dB of gain in the UHF band
• Switching between gain stages using discrete switches
• Additional stepless gain adjustment with potentiometers
• Smooth slope adjustment for gain characteristics
• Possibility to power the preamplifier with 12 V
• Open casing
• Integrated LTE signal filter
• 39 dB of gain in the VHF band and 44 dB of gain in the UHF band
• Switching between gain stages using discrete switches
• Additional stepless gain adjustment with potentiometers
• Smooth slope adjustment for gain characteristics
• Possibility to power the preamplifier with 12 V
• Open casing
HS005L building amplifier for the VHF (88-230 MHz)/UHF (470-790 MHz) bands. The maximum gain in the VHF band is 30 dB, in the UHF band it is 34 dB.
• Universal Terra TV amplifier for use in buildings
• Integrated 4G LTE filter - attenuation of signals above 791 MHz
• Split-band circuitry with separate gain adjustments in VHF (30 dB) and UHF (34 dB) ranges
• Switchable (ON/OFF) 12 VDC / 60 mA supply for a preamplifier
(through the RF input)
• Die-cast housing providing high screening efficiency by preventing the penetration of interfering signals to the unit
• Test output (-30 dB)
• 4-year warranty
• Integrated 4G LTE filter - attenuation of signals above 791 MHz
• Split-band circuitry with separate gain adjustments in VHF (30 dB) and UHF (34 dB) ranges
• Switchable (ON/OFF) 12 VDC / 60 mA supply for a preamplifier
(through the RF input)
• Die-cast housing providing high screening efficiency by preventing the penetration of interfering signals to the unit
• Test output (-30 dB)
• 4-year warranty
The AS038R65 amplifier (1-in/4-out) is designed for cable TV installations providing services also in the return channel band (Internet).
• For use in CATV and DVB-T antenna systems
• Return channel connectivity (Internet)
• Passive return channel is compatible with any CATV network
• Maximum output level of 100 dBμV
• Built-in 4-way splitter
• Max gain of 23 dB, with adjustment range of 16 dB
• Low power consumption (below 3 W)
• Return channel connectivity (Internet)
• Passive return channel is compatible with any CATV network
• Maximum output level of 100 dBμV
• Built-in 4-way splitter
• Max gain of 23 dB, with adjustment range of 16 dB
• Low power consumption (below 3 W)
The MA044M building amplifier is designed for community antenna installations. The amplification in VHFI/FM, VHFIII bands is 30 dB, in the UHF band it is 34 dB.
• Built-in cable pre-correction
• 30 dB gain on FM, BIII and 34 dB gain for each UHF input
On/Off switch enabling sending 12 V voltage and 60 mA current to the antenna preamplifier
• The cast housing ensures high shielding effectiveness, preventing interference signals from penetrating inside the device
• 30 dB gain on FM, BIII and 34 dB gain for each UHF input
On/Off switch enabling sending 12 V voltage and 60 mA current to the antenna preamplifier
• The cast housing ensures high shielding effectiveness, preventing interference signals from penetrating inside the device
The MA045M building amplifier is designed for community antenna installations. The amplification in VHFI/FM, VHFIII bands is 30 dB, in 2xUHF band it is 34 dB.
• Multi-input building amplifier
• Built-in cable pre-correction
• 30/34 dB gain
• Maximum output level 115 dBμV
• Capable of supplying DC 12 V to the antenna preamplifier
• The die-cast housing for effective shielding
• Built-in cable pre-correction
• 30/34 dB gain
• Maximum output level 115 dBμV
• Capable of supplying DC 12 V to the antenna preamplifier
• The die-cast housing for effective shielding
The MA050L building amplifier is designed for small and medium-sized RTV installations. The amplification in the FM/VHFIII bands is 30 dB, in the UHF band it is 34 dB.
• Built-in cable pre-correction
• Integrated LTE attenuation filter
• 30 dB gain in FM, BIII band and 34 dB gain in UHF band
• On/Off switch allowing 12 volts and 60 mA current to be sent to the antenna preamplifier
• Open housing provides high efficiency shielding to prevent interfering signals from penetrating inside the unit
• Integrated LTE attenuation filter
• 30 dB gain in FM, BIII band and 34 dB gain in UHF band
• On/Off switch allowing 12 volts and 60 mA current to be sent to the antenna preamplifier
• Open housing provides high efficiency shielding to prevent interfering signals from penetrating inside the unit
The DTT MCA101T TERRA masthead correction amplifier is dedicated to work with OTF30x transmitters
• Dedicated to work with TERRA's OTF30x optical transmitters
• Frequency converter
• Automatic Gain Control (AGC) circuit to ensure signal stability
• Built-in LTE700 filter
• Remote DC power supply
• Capable of outdoor mounting
• Frequency converter
• Automatic Gain Control (AGC) circuit to ensure signal stability
• Built-in LTE700 filter
• Remote DC power supply
• Capable of outdoor mounting
House amplifier used in SMATV and cable systems with return channel.
• Building amplifier
• Dedicated to cable installations
• Frequency range: 5...65 MHz/87...862 MHz
• Push-pull output stage, made of gallium arsenide GaAs
• Characteristics corrector on input of feedforward and return channel
• Outside housing
• Amplification of 40 dB (forward channel) and -5/27 dB (return channel)
• Dedicated to cable installations
• Frequency range: 5...65 MHz/87...862 MHz
• Push-pull output stage, made of gallium arsenide GaAs
• Characteristics corrector on input of feedforward and return channel
• Outside housing
• Amplification of 40 dB (forward channel) and -5/27 dB (return channel)
House amplifier used in SMATV and cable systems with return channel.
• House amplifier
• Dedicated to cable systems
• Frequency range: 5...65 MHz/87...1218 MHz
• Push-pull output stage, made of gallium arsenide GaAs
• Waveform correction filter at input of the transmission and return channel
• Die-cast housing
• Gain of 40 dB (transmission channel) and -5/27 dB (return channel)
• Dedicated to cable systems
• Frequency range: 5...65 MHz/87...1218 MHz
• Push-pull output stage, made of gallium arsenide GaAs
• Waveform correction filter at input of the transmission and return channel
• Die-cast housing
• Gain of 40 dB (transmission channel) and -5/27 dB (return channel)
HA024 building amplifier for use in small and medium-sized RTV installations. Built-in gain switch 18...20/27...30 dB.
• Ideal for amplification of DVB-T and cable TV signals
• Maximum gain 30 dB
• Attenuation correction - recommended for long antenna cable lengths
• Double gain control
• Maximum output signal level 97 dBμV
• Maximum gain 30 dB
• Attenuation correction - recommended for long antenna cable lengths
• Double gain control
• Maximum output signal level 97 dBμV
HA-126 building amplifier (1 in/1 out) for use in community antenna installations to compensate for attenuation of RTV signals. Gain 34 dB.
• Broadband amplifier
• Maximum gain 34 dB
• One of the most popular amplifiers on the market
• Maximum output signal level 117 dBμV
• Gain control within 20 dB
• Cable attenuation correction in the range of 18 dB
• Maximum gain 34 dB
• One of the most popular amplifiers on the market
• Maximum output signal level 117 dBμV
• Gain control within 20 dB
• Cable attenuation correction in the range of 18 dB
HA-131L amplifier with LTE filter for large RTV installations. It is characterised by a high gain of 36 dB.
• High power amplifier designed for TV installations
• 36 dB amplification
• Maximum output level 122 dBμV
• Built-in LTE filter - suppression of unwanted signals above 791 MHz
• Smooth gain adjustment
• Smooth slope adjustment for gain characteristics
• Open housing
• 36 dB amplification
• Maximum output level 122 dBμV
• Built-in LTE filter - suppression of unwanted signals above 791 MHz
• Smooth gain adjustment
• Smooth slope adjustment for gain characteristics
• Open housing
The HA-210 amplifier for large radio frequency installations. It is characterised by a high gain of 36 dB.
• Zero-band TV amplifier
• Open housing for highest screening efficiency
• High gain - up to 36 dB
• 20 dB gain adjustment
• Maximum output signal level 107 dBμV
• Cable attenuation correction 20 dB
• Test input and output
• Open housing for highest screening efficiency
• High gain - up to 36 dB
• 20 dB gain adjustment
• Maximum output signal level 107 dBμV
• Cable attenuation correction 20 dB
• Test input and output
The SA003 amplifier is designed to amplify satellite TV signals in the 950 MHz - 2400 MHz band in RTV/SAT installations.
• Signal amplifier for DVB-T/T2+SAT lines
• Power supply from receiver
• Increase max. 22 dB
• Max. output level 118 dBμV
• Passive terrestrial TV path
• Small dimensions
• Power supply from receiver
• Increase max. 22 dB
• Max. output level 118 dBμV
• Passive terrestrial TV path
• Small dimensions
MA-049L building amplifier with LTE filter. The gain in the FM and BIII bands is 30 dB, while in the UHF band it is 34 dB.
• Integrated LTE attenuation filter
• 30 dB gain in the FM, BIII band and 34 dB gain in the UHF band
• On/Off switch allowing 12 V and 60 mA current to be sent to the antenna preamplifier
• Open housing provides high efficiency shielding to prevent interfering signals from penetrating inside the unit
• 30 dB gain in the FM, BIII band and 34 dB gain in the UHF band
• On/Off switch allowing 12 V and 60 mA current to be sent to the antenna preamplifier
• Open housing provides high efficiency shielding to prevent interfering signals from penetrating inside the unit
The MA075L R82330 house amplifier with an LTE filter is used for FM and TV systems, ensuring gain up to 35 dB (in the FM and VHFIII bands) and 47 dB (in the UHF band).
• Integrated LTE filter
• 35 dB gain in FM and VHFIII bands, and 47 dB gain in UHF band
• On-off switch to divert power supply voltage 12 VDC at 100 mA to an optional preamp in the UHF path
• Die-cast housing for high screening efficiency, preventing the external interference from reaching the device
• 35 dB gain in FM and VHFIII bands, and 47 dB gain in UHF band
• On-off switch to divert power supply voltage 12 VDC at 100 mA to an optional preamp in the UHF path
• Die-cast housing for high screening efficiency, preventing the external interference from reaching the device
The MA076L building amplifier with LTE filter is used in RTV installations. The amplification in the FM and VHFIII bands is 35 dB, while in the 2xUHF band it is 47 dB.
• Integrated LTE filter
• 35 dB gain in FM and VHFIII bands, and 47 dB gain in UHF band
• Switch connecting supply voltage (12 VDC, max. 100 mA) to optional preamplifier in the UHF path
• Die-cast housing with high screening efficiency, blocking external interference signals
• 35 dB gain in FM and VHFIII bands, and 47 dB gain in UHF band
• Switch connecting supply voltage (12 VDC, max. 100 mA) to optional preamplifier in the UHF path
• Die-cast housing with high screening efficiency, blocking external interference signals
The ma400 amplifier is a top-of-the-range device designed to amplify signals from the FM, VHF and UHF bands.
• Three independent amplification paths for FM, VHF/DAB, UHF
• Built-in crossover
• Smooth gain control -15...0 dB
• Additional attenuator -10 dB
• Power supply for preamplifiers DC 12 V 0.1A
• Gain 30dB
• Maximum signal level of IMD3 VHF 116
• Built-in crossover
• Smooth gain control -15...0 dB
• Additional attenuator -10 dB
• Power supply for preamplifiers DC 12 V 0.1A
• Gain 30dB
• Maximum signal level of IMD3 VHF 116
The DR-60-12 power supply is designed to power Terra channel amplifiers, transmodulators, IP streamers mounted on universal DIN rails.
• 12 V DC power supply
• Current capacity 4.5 A
• Designed for TERRA channel amplifiers, transmodulators, IP streamers
• Mounted on universal DIN rails for rack cabinets
• Current capacity 4.5 A
• Designed for TERRA channel amplifiers, transmodulators, IP streamers
• Mounted on universal DIN rails for rack cabinets
The UP-413 power supply is designed to provide redundant power to Terra channel amplifiers, transmodulators, IP streamers mounted on universal DIN rails.
• 12 V DC power supply for TERRA panels
• Current capacity 4.5 A
• DIN rail mounting
• Includes tapes for power distribution between panels
• Current capacity 4.5 A
• DIN rail mounting
• Includes tapes for power distribution between panels
The UP413S power supply is designed to supply power to Terra channel amplifiers, transmodulators, IP streamers mounted on universal DIN rails.
• Power supply designed for TERRA headend panels
• Convenient and aesthetically pleasing implementation of the headend power supply
• Output voltage DC 12 V
• Current capacity 4.5 A
• Multiple mounting options (wall, DIN, RACK)
• Built-in RF signal combiner
• Convenient and aesthetically pleasing implementation of the headend power supply
• Output voltage DC 12 V
• Current capacity 4.5 A
• Multiple mounting options (wall, DIN, RACK)
• Built-in RF signal combiner
The ribbon supply cable 699.20 is used to distribute power between panels of transmodulators, TERRA IP streamers with a width of 36 mm.
• The 699.20 ribbon cable is used to distribute power between panels of TERRA devices
• It allows transmission of 12 VDC between 4 devices
• Designed to connect devices with a width of 36 mm
• It allows transmission of 12 VDC between 4 devices
• Designed to connect devices with a width of 36 mm
The ribbon supply cable 780.20 is used to distribute power between panels of transmodulators, TERRA IP streamers with a width of 48.5 mm.
• The 780.20 ribbon cable is used to distribute power between panels of TERRA devices
• It allows transmission of 12 VDC between 4 devices
• Designed to connect devices with a width of 48 mm
• It allows transmission of 12 VDC between 4 devices
• Designed to connect devices with a width of 48 mm
The 699.20 bridge is used to pass the signal between successive panels of TERRA 36 mm wide channel amplifiers, transmodulators, IP streamers.
• For the transmission of signals between the inputs and outputs of TERRA devices
• Terminated with 2 F-type plugs
• Designed to connect devices with a width of 36 mm
• Terminated with 2 F-type plugs
• Designed to connect devices with a width of 36 mm
ALCAD's CAD-824 programmable, multi-band, channel amplifier is designed for community antenna installations for reception of DVB-T2 digital terrestrial television.
• Amplifier dedicated for SMATV antenna systems
• 4 VHF+UHF inputs, 1 FM input
• Auto-configuration function
• DC feeding for preamplifiers 12 - 24 V
• High selectivity with 32 filters
• High gain with AGC
• Converter function
• Excellent output signal quality
• Easy installation and configuration
• 4 VHF+UHF inputs, 1 FM input
• Auto-configuration function
• DC feeding for preamplifiers 12 - 24 V
• High selectivity with 32 filters
• High gain with AGC
• Converter function
• Excellent output signal quality
• Easy installation and configuration
The WWK Maestro is a new generation channel amplifier with 4 inputs for DVB-T2 digital terrestrial antennas.
• Maximum output level 93 dBµV
• 4 UHF+VHF inputs
• 32 digital channel filters with high selectivity and wide AGC range
• Automatic detection of appropriate signals
• 5G protected technology
• Compact dimensions and mast housing
• Remote power supply
• Self-installation for everyone
• 4 UHF+VHF inputs
• 32 digital channel filters with high selectivity and wide AGC range
• Automatic detection of appropriate signals
• 5G protected technology
• Compact dimensions and mast housing
• Remote power supply
• Self-installation for everyone
The Johansson PROFINO Revolution 6711 FM-DAB/VHF-2xUHF is a channel amplifier for use in large collective RTV installations.
• Amplifier designed for community antenna installations
• Automatic gain control (AGC) in real time
• Independent, selective amplification for 30 channel paths/filters in the VHF/UHF band
• Converter function
• Appropriate for transmission of digital terrestrial television signals DVB-T
• LTE signal attenuation switch (4G band > 790 MHz, 5G band > 694 MHz)
• Low power consumption
• Easy installation and configuration
• Automatic gain control (AGC) in real time
• Independent, selective amplification for 30 channel paths/filters in the VHF/UHF band
• Converter function
• Appropriate for transmission of digital terrestrial television signals DVB-T
• LTE signal attenuation switch (4G band > 790 MHz, 5G band > 694 MHz)
• Low power consumption
• Easy installation and configuration
The WWK ALPHA 2 is an advanced digital channel amplifier designed for professional SMATV antenna installations and extensive individual installations.
• Digital selective signal processing DVB-T2 (DSP)
• Channel conversion within the VHF and UHF bands
• Individual level control of each MUX and global output control
• DAB wideband mode (174-230 MHz) without channel programming
• Advanced LTE 700/LTE 800 filtering, SAW filter active in LTE 700 mode
• SMART SCAN function - automatic search for DVB-T2 signals
• Intelligent power control of preamplifiers (Auto Preamp Control)
• High immunity to overdrive and interference (IMD3 to 122 dBµV)
• Class A shielding according to EN 50083-2
• Compact metal casing
• Channel conversion within the VHF and UHF bands
• Individual level control of each MUX and global output control
• DAB wideband mode (174-230 MHz) without channel programming
• Advanced LTE 700/LTE 800 filtering, SAW filter active in LTE 700 mode
• SMART SCAN function - automatic search for DVB-T2 signals
• Intelligent power control of preamplifiers (Auto Preamp Control)
• High immunity to overdrive and interference (IMD3 to 122 dBµV)
• Class A shielding according to EN 50083-2
• Compact metal casing
The WWK-951 amplifier is designed for antenna installations in single-family houses, residences, hotels, boarding houses, holiday homes, schools, hospitals.
• Amplifier designed for community antenna installations
• Independent, selective amplification for 5 channel paths/filters in the UHF band
• Adjustable channel path width: 1...6 channels (8...48 MHz)
• Power for antenna preamplifiers for UHF1-UHF2 inputs
• Built-in indication of antenna preamplifiers power supply operating status
• Adapted for transmission of analogue and digital terrestrial television signals DVB-T/T2
• Low power consumption
• Easy installation and configuration
• Independent, selective amplification for 5 channel paths/filters in the UHF band
• Adjustable channel path width: 1...6 channels (8...48 MHz)
• Power for antenna preamplifiers for UHF1-UHF2 inputs
• Built-in indication of antenna preamplifiers power supply operating status
• Adapted for transmission of analogue and digital terrestrial television signals DVB-T/T2
• Low power consumption
• Easy installation and configuration
Masthead antenna amplifier AM-346 dedicated for RF systems powered by 24 VDC.
• Supply voltage 24 V
• Number of inputs: 3
• Number of outputs: 1
• 20 dB of gain in the FM+VHF band and 32 dB gain in the UHF band
• 2 On/Off potentiometers that allow 24 VDC voltage and 50 mA current to be sent to antenna preamplifiers through each of the two UHF inputs
• Die-cast housing inside a compact plastic case
• Number of inputs: 3
• Number of outputs: 1
• 20 dB of gain in the FM+VHF band and 32 dB gain in the UHF band
• 2 On/Off potentiometers that allow 24 VDC voltage and 50 mA current to be sent to antenna preamplifiers through each of the two UHF inputs
• Die-cast housing inside a compact plastic case
The AL-105 power supply is used to supply power to Alcad mast-mounted antenna amplifiers supplied with 12 V DC.
• Applied to power Alcad mast-mounted amplifiers supplied with 12 V DC
• Current capacity 100 mA
• Number of outputs: 2
• Current capacity 100 mA
• Number of outputs: 2
Antenna amplifier AI-200 VHF/UHF (1 in/2 output) used in small and medium TV installations to distribute the signal to several receivers.
• Home amplifier with built-in splitter
• Maximum gain 24 dB
• Gain adjustment for VHF/FM and UHF band
• Maximum output signal level 105 dBμV
• Maximum gain 24 dB
• Gain adjustment for VHF/FM and UHF band
• Maximum output signal level 105 dBμV
The AI-223 amplifier is used as a subscriber amplifier to distribute the signal from cable TV or a collective installation to several receivers.
• Amplifier for home antenna systems with two outputs
• Passive return channel 0-65 MHz
• Max gain of 25 dB
• Gain adjustment in VHF/FM range
• 12 VDC power option for a preamplifier
• Max output level of 105 dBμV
• Passive return channel 0-65 MHz
• Max gain of 25 dB
• Gain adjustment in VHF/FM range
• 12 VDC power option for a preamplifier
• Max output level of 105 dBμV
CA-215 VHF/UHF antenna amplifier (1 in/2 output) for small and medium TV installations. The preamplifier can be supplied with 12 V DC.
• Amplifier for home antenna systems with two outputs
• Max gain of 25 dB
• Separate gain adjustment in VHF/FM and UHF bands
• 12 VDC power option for a preamplifier
• Max output level of 105 dBμV
• Max gain of 25 dB
• Separate gain adjustment in VHF/FM and UHF bands
• 12 VDC power option for a preamplifier
• Max output level of 105 dBμV
The OTM302T optical transmitter is used to create fiber optic RF/SAT systems and the implementation of transmissions at a wavelength of 1310 nm.
• FP laser
• 1310 nm wavelength
• +6 dBm optical output power
• Built-in RF converter
• Die-cast housing guarantees high level of screening – class A
• AGC – automatic gain control stabilizes the signal level
• LEDs on the housing make it much easier to properly configure the entire system
• 1310 nm wavelength
• +6 dBm optical output power
• Built-in RF converter
• Die-cast housing guarantees high level of screening – class A
• AGC – automatic gain control stabilizes the signal level
• LEDs on the housing make it much easier to properly configure the entire system
The OTF302 6F31 E TERRA optical transmitter is used to create TV/SAT systems using optical fibre technology and transmission at 1310 nm wavelength (transmission window II).
• FP type laser
• Wavelength 1310 nm
• Power at optical output +6 dBm
• Open housing ensuring high level of shielding – class A
• AGC – automatic gain control stabilizing signal level
• LEDs on the housing for much easier configuration of the entire system
• Wavelength 1310 nm
• Power at optical output +6 dBm
• Open housing ensuring high level of shielding – class A
• AGC – automatic gain control stabilizing signal level
• LEDs on the housing for much easier configuration of the entire system
The ORQ302 E optical receiver allows the conversion of the optical signal coming from the OTF302 6F31 E A3031 or OTF302 6F55 E A3055 transmitter into an electrical signal. QUATRO + DVB-T2 type output.
• Wavelength 1100...1650 nm
• Acceptable power level at optical input -15...-5 dBm
• Open casing guaranteeing high level of shielding - class A
• OLC - automatic control to stabilise signal level
• LEDs on the casing greatly facilitating proper configuration of the whole system
• DC power supply is provided directly from the connected multiswitch or from an external DC 10...20 V power supply, which is not standard equipment
• Acceptable power level at optical input -15...-5 dBm
• Open casing guaranteeing high level of shielding - class A
• OLC - automatic control to stabilise signal level
• LEDs on the casing greatly facilitating proper configuration of the whole system
• DC power supply is provided directly from the connected multiswitch or from an external DC 10...20 V power supply, which is not standard equipment
The ORD301F E optical receiver allows the conversion of the optical signal coming from the OTF302 6F31 E or OTF302 6F55 E transmitter into an electrical signal
• Wavelength 1100...1650 nm
• Acceptable power level at the optical input -15...-5 dBm
• Open housing ensuring high level of shielding – class A
• OLC – automatic control stabilizing signal level
• Acceptable power level at the optical input -15...-5 dBm
• Open housing ensuring high level of shielding – class A
• OLC – automatic control stabilizing signal level
The ORL302F E optical receiver enables the conversion of optical signals into Legacy, Wideband and Radio/DVB-T2 electrical signals.
• Wavelength 1100...1650 nm
• Acceptable power level at the optical input -15...-5 dBm
• Open casing to ensure a high level of shielding – class A
• OLC - automatic control to stabilize the signal level
• LEDs on the casing greatly facilitating the proper configuration of the entire system
• Acceptable power level at the optical input -15...-5 dBm
• Open casing to ensure a high level of shielding – class A
• OLC - automatic control to stabilize the signal level
• LEDs on the casing greatly facilitating the proper configuration of the entire system
The QUATRO converter has been designed for output replication of satellite IF signals and DVB-T/T2 and FM/DAB digital terrestrial TV antennas. It is powered from a multiswitch.
• Receiver works with TOU 232 KIT and LNB TOL32
• Converts optical signal to electrical signal (4x SAT + DVB-T)
• Sensitivity: -15...0 dBm
• Converts optical signal to electrical signal (4x SAT + DVB-T)
• Sensitivity: -15...0 dBm
The QUAD converter has been designed for output replication of satellite IF signals and DVB-T/T2 and FM/DAB digital terrestrial antennas.
• Receiver works with TOU 232 KIT and LNB TOL32
• Converts optical signal to electrical signal (4x SAT + DVB-T)
• Sensitivity: -15...0 dBm
• Converts optical signal to electrical signal (4x SAT + DVB-T)
• Sensitivity: -15...0 dBm
FOS 102 E optical splitter is an element used to divide the optical signal into 2 paths.
• Dividing the signal into 2 paths
• FC/PC sockets
• Box type housing
• Attenuation of 3.9 dB
• FC/PC sockets
• Box type housing
• Attenuation of 3.9 dB
FOS 104 E optical splitter is an element used to divide the optical signal into 4 paths.
• Dividing the signal into 4 paths
• FC/PC sockets
• Box type housing
• Attenuation of 7.4 dB
• FC/PC sockets
• Box type housing
• Attenuation of 7.4 dB
FOS 108 E optical splitter is an element used to divide the optical signal into 8 paths.
• Dividing the signal into 8 paths
• FC/PC sockets
• Box type housing
• Attenuation of 10.8 dB
• FC/PC sockets
• Box type housing
• Attenuation of 10.8 dB
SIGNAL PRO optical transmitter TR-501 is used for the transmission of RTV/SAT signals using optical fibre technology. Input type 1xQUATRO + radio/DVB-T2.
• Conversion of DVB-S/S2 (1 satellite position) and radio/DVB-T2 signals
• Input type 1xQUATRO + radio/DVB-T2
• Compatible with QUAD or QUATRO converter
• Output power 4 x +3 dBm
• Connector type SC/APC
• WDM technology (all signals in 1 fibre)
• AGC - automatic gain control stabilising signal level
• LEDs for easy diagnostics
• Single-mode fibre optic transmission
• Maximum signal splitting up to 16 QUATRO REC-105 receivers
• Input type 1xQUATRO + radio/DVB-T2
• Compatible with QUAD or QUATRO converter
• Output power 4 x +3 dBm
• Connector type SC/APC
• WDM technology (all signals in 1 fibre)
• AGC - automatic gain control stabilising signal level
• LEDs for easy diagnostics
• Single-mode fibre optic transmission
• Maximum signal splitting up to 16 QUATRO REC-105 receivers
The REC-105 optical receiver enables the conversion of the optical signal from the TR-901 transmitter into an electrical signal. Output type 1xQUATRO + radio/DVB-T2.
• Output type 1xQUATRO + radio/DVB-T2
• Compatible with TR-501 SIGNAL PRO optical transmitter
• Built-in AGC circuit, which ensures signal stability at the output of the device
• Supported wavelengths: 1550-1570 nm
• Conversion of optical signal to full band 1x SAT IF (VL/VH/HL/HH) in QUATRO circuit and radio/DVB-T2 signals
• High noise immunity and stable operation over a wide input power range
• High sensitivity for multi-point installations
• SC/APC optical connector
• Compatible with TR-501 SIGNAL PRO optical transmitter
• Built-in AGC circuit, which ensures signal stability at the output of the device
• Supported wavelengths: 1550-1570 nm
• Conversion of optical signal to full band 1x SAT IF (VL/VH/HL/HH) in QUATRO circuit and radio/DVB-T2 signals
• High noise immunity and stable operation over a wide input power range
• High sensitivity for multi-point installations
• SC/APC optical connector
The TR-901 SIGNAL PRO optical transmitter is used for the transmission of RTV/SAT signals using optical fibre technology. Input type 2xQUATRO + radio/DVB-T2.
• Conversion of DVB-S/S2 (2 satellite positions) and radio/DVB-T2 signals
• Input type: 2xQUATRO + radio/DVB-T2
• Compatible with QUAD and QUATRO LNBs
• Output power: 8 x +5 dBm
• Connector type SC/APC
• WDM technology (all signals in 1 fibre)
• AGC - automatic gain control to stabilise the signal level
• LEDs for easy diagnostics
• Single-mode fibre optic transmission
• Maximum signal splitting up to 16 QUATRO REC-109 receivers
• Input type: 2xQUATRO + radio/DVB-T2
• Compatible with QUAD and QUATRO LNBs
• Output power: 8 x +5 dBm
• Connector type SC/APC
• WDM technology (all signals in 1 fibre)
• AGC - automatic gain control to stabilise the signal level
• LEDs for easy diagnostics
• Single-mode fibre optic transmission
• Maximum signal splitting up to 16 QUATRO REC-109 receivers
The REC-109 optical receiver enables the conversion of the optical signal from the TR-901 transmitter into an electrical signal. Output type 2xQUATRO + radio/DVB-T2.
• 2xQUATRO + radio/DVB-T2 type output
• Compatible with TR-901 SIGNAL PRO optical transmitter
• Built-in AGC circuit, which ensures signal stability at the output of the device
• Supported wavelengths: 1330-1570 nm
• Conversion of optical signal to full bandwidth 2x SAT IF (VL/VH/HL/HH) in QUATRO system and radio/DVB-T2 signals
• High noise immunity and stable operation over a wide input power range
• High sensitivity for multi-point installations
• SC/APC optical connector
• Compatible with TR-901 SIGNAL PRO optical transmitter
• Built-in AGC circuit, which ensures signal stability at the output of the device
• Supported wavelengths: 1330-1570 nm
• Conversion of optical signal to full bandwidth 2x SAT IF (VL/VH/HL/HH) in QUATRO system and radio/DVB-T2 signals
• High noise immunity and stable operation over a wide input power range
• High sensitivity for multi-point installations
• SC/APC optical connector
The FTTH OD-012 H optical receiver (SC/APC optical connector) is designed to convert optical signals into electrical signals in the 47-862/1006 MHz band.
• Optical connector: SC/APC
• Open housing for high screening efficiency
• Output bandwidth 47-862/1006 MHz
• Microprocessor-based AGC (automatic gain control) based on optical signal level
• Range of signal level at optical input: -9...2 dBm
• Maximum output level: 108 dBµV
• Open housing for high screening efficiency
• Output bandwidth 47-862/1006 MHz
• Microprocessor-based AGC (automatic gain control) based on optical signal level
• Range of signal level at optical input: -9...2 dBm
• Maximum output level: 108 dBµV
The OD-004A optical node (SC/APC optical connector) is designed to convert an optical signal into an electrical signal in the 47-2400 MHz band.
• Compact dimensions
• Output bandwidth 47-2400 MHz
• Microprocessor-based AGC (automatic gain control) based on optical signal level
• Connector: optical: SC/APC
• Output bandwidth 47-2400 MHz
• Microprocessor-based AGC (automatic gain control) based on optical signal level
• Connector: optical: SC/APC
The OD-003 optical node (SC/APC optical connector) is designed to convert an optical signal into an electrical signal in the 47-1002 MHz band.
• Compact size
• Expanded output bandwidth 47-1002 MHz
• Very high sensitivity: -10...3 dBm
• Microprocessor-based automatic gain control (AGC)
• Maximum output signal level: 80 dBμV
• LED display
• Connectors: optical - SC/APC
• Expanded output bandwidth 47-1002 MHz
• Very high sensitivity: -10...3 dBm
• Microprocessor-based automatic gain control (AGC)
• Maximum output signal level: 80 dBμV
• LED display
• Connectors: optical - SC/APC
The OD-005P optical receiver (SC/APC optical connector) is designed to convert an optical signal into an electrical signal in the 47-862 MHz band.
• Compact size
• Die-cast housing provides high efficiency shielding to prevent interfering signals from penetrating inside the unit
• Output bandwidth 47-862 MHz
• Sensitivity -6 ... 0 dBm
• Maximum output level 107 dBμV
• Microprocessor-based AGC (automatic gain control) based on signal level
• Die-cast housing provides high efficiency shielding to prevent interfering signals from penetrating inside the unit
• Output bandwidth 47-862 MHz
• Sensitivity -6 ... 0 dBm
• Maximum output level 107 dBμV
• Microprocessor-based AGC (automatic gain control) based on signal level
The OD-006 compact optical receiver (SC/APC optical connector) is designed to convert an optical signal into an electrical signal in the 47-1006 MHz band.
• Compact-size (7 cm long) optical DVB-T/DVB-C receiver
• Die-cast housing providing high screening efficiency by preventing the penetration of interfering signals to the unit
• Output RF range: 47-1006 MHz
• Sensitivity: -6...0 dBm
• Max output level: 80 dBμV
• AGC based on optical input level
• Die-cast housing providing high screening efficiency by preventing the penetration of interfering signals to the unit
• Output RF range: 47-1006 MHz
• Sensitivity: -6...0 dBm
• Max output level: 80 dBμV
• AGC based on optical input level
The OD-007 H compact optical receiver (SC/APC optical connector) is designed to convert an optical signal into an electrical signal in the 47-2400 MHz band.
• Compact size
• Remotely powered from a 10 V...20 V / 60 mA source
• Die-cast housing providing high screening efficiency by preventing the penetration of interfering signals to the unit
• Output RF range: 47-2400 MHz
• AGC based on optical input level
• Optical connector: SC/APC
• Remotely powered from a 10 V...20 V / 60 mA source
• Die-cast housing providing high screening efficiency by preventing the penetration of interfering signals to the unit
• Output RF range: 47-2400 MHz
• AGC based on optical input level
• Optical connector: SC/APC
The mo418 4D31 optical transmitter with a power of 1x6 dBm is used to transmit RTV/SAT TV signals using the optical fibre medium for wavelengths of 1310 nm.
• The transmitter allows the distribution of DVB-S/S2 and CATV signals
• Input frequency range: 47-2400 MHz
• Optical output power 6 dBm
• AGC function (automatic gain control)
• Digitally programmable with buttons located on the front panel
• Two-position display
• Multiple mounting options (DIN rail, façade)
• Connectors: 3xRF - input/output and test output - type F, 1x optical - SC/APC
• Input frequency range: 47-2400 MHz
• Optical output power 6 dBm
• AGC function (automatic gain control)
• Digitally programmable with buttons located on the front panel
• Two-position display
• Multiple mounting options (DIN rail, façade)
• Connectors: 3xRF - input/output and test output - type F, 1x optical - SC/APC
The mo428 4D31 optical transmitter with a power of 2x6 dBm is used for the transmission of RTV/SAT TV signals using the optical fibre medium for wavelengths of 1310 nm.
• The transmitter allows the distribution of DVB-S/S2 and CATV signals
• Input frequency range: 47-2400 MHz
• Optical output power 2x6 dBm
• AGC function (automatic control of signal amplification)
• Digitally programmable with buttons located on the front panel
• Two-position display
• Multiple mounting options (DIN rail, façade)
• Connectors: 3xRF - input/output and test output - type F, 2x optical - SC/APC
• Input frequency range: 47-2400 MHz
• Optical output power 2x6 dBm
• AGC function (automatic control of signal amplification)
• Digitally programmable with buttons located on the front panel
• Two-position display
• Multiple mounting options (DIN rail, façade)
• Connectors: 3xRF - input/output and test output - type F, 2x optical - SC/APC
The mo418 4F31 TERRA optical transmitter is designed for transmitting TV signals via fiber optic medium.
• Transmitter enables distribution of DVB-S/S2 and CATV signals
• Laser type - FP (Fabry-Perot)
• Input frequency range: 47-2400 MHz
• RF signal loop input
• AGC function (automatic signal gain control)
• Maximum input level: 85 dBμV
• Input level adjustment 0...-15 dB in 1 dB steps
• Device programmable digitally using buttons located on the front panel
• Two-position display
• Several mounting options (DIN rail, facade)
• Connectors: 3xRF: input/output and test output - type F, 1x optical - SC/APC
• Laser type - FP (Fabry-Perot)
• Input frequency range: 47-2400 MHz
• RF signal loop input
• AGC function (automatic signal gain control)
• Maximum input level: 85 dBμV
• Input level adjustment 0...-15 dB in 1 dB steps
• Device programmable digitally using buttons located on the front panel
• Two-position display
• Several mounting options (DIN rail, facade)
• Connectors: 3xRF: input/output and test output - type F, 1x optical - SC/APC
DVB-T2 digital terrestrial and DVB-S/S2 FTA (Free to air) satellite receiver.
• Supports DVB-T2 (terrestrial) and DVB-S/S2 (satellite) signals.
• Full HD quality: H.265/HEVC decoding and SPDIF digital audio.
• Recording and pausing of programmes: PVR and TimeShift functions.
• USB multimedia (MP3, JPEG, BMP, OGG): movies, photos, music.
• Intuitive interface and remote control with learning function (RCU 161)
• Full HD quality: H.265/HEVC decoding and SPDIF digital audio.
• Recording and pausing of programmes: PVR and TimeShift functions.
• USB multimedia (MP3, JPEG, BMP, OGG): movies, photos, music.
• Intuitive interface and remote control with learning function (RCU 161)
The Signal T2-MINI receiver receives free-to-air channels broadcast on DVB-T2 digital terrestrial television in HEVC (H.265/MPEG-H) and H.264/MPEG-4 video coding technology with Dolby E-AC-3 audio.
• DVB-T2 standard terrestrial TV reception
• HEVC (H.265 /MPEG-H) encoding support
• Reception of audio in MPEG-2 Audio and Dolby E-AC-3 standard
• Hotel mode
• HDMI CEC function – turning on the tuner turns on the TV and vice versa (when using AC power)
• Program list copying
• Power supply from TV USB port or 5V power adapter
• Universal, learning remote control
• Semi-Twin Tuner – it is possible to record one channel and watch another at the same time, provided they are on the same multiplex
• Multilingual menu: Polish, English, German, Czech, Hungarian, Slovak, Croatian, Portuguese, Italian
• Reception of high definition channels (High Definition)
• Programmable timer support
• Teletext and subtitle support
• Logical Channel Number (LCN) support
• Possibility to manually change the order of programs and numbering
• Teletext and subtitle support
• Electronic Program Guide (EPG)
• PVR Ready function
• TimeShift
• Multimedia player
• Very high sensitivity DVB- head
• Low heat emission
• HEVC (H.265 /MPEG-H) encoding support
• Reception of audio in MPEG-2 Audio and Dolby E-AC-3 standard
• Hotel mode
• HDMI CEC function – turning on the tuner turns on the TV and vice versa (when using AC power)
• Program list copying
• Power supply from TV USB port or 5V power adapter
• Universal, learning remote control
• Semi-Twin Tuner – it is possible to record one channel and watch another at the same time, provided they are on the same multiplex
• Multilingual menu: Polish, English, German, Czech, Hungarian, Slovak, Croatian, Portuguese, Italian
• Reception of high definition channels (High Definition)
• Programmable timer support
• Teletext and subtitle support
• Logical Channel Number (LCN) support
• Possibility to manually change the order of programs and numbering
• Teletext and subtitle support
• Electronic Program Guide (EPG)
• PVR Ready function
• TimeShift
• Multimedia player
• Very high sensitivity DVB- head
• Low heat emission
The Ariva T45 is a compact and powerful terrestrial TV receiver, fully compliant with the current DVB-T2 HEVC standard.
• Full DVB-T2/HEVC (H.265) compatibility.
• High picture quality - PAL upscaling to 720p/1080p, sharp and clear picture on any TV
• Extensive connectivity - HDMI, SCART, USB, Ethernet and COAXIAL ports.
• Multimedia from USB - play movies, music and photos directly on the TV.
• Network functions - Ethernet and Wi-Fi Ready for updates and additional online services
• Intelligent remote - learning function allows you to control the decoder and TV with one device
• High picture quality - PAL upscaling to 720p/1080p, sharp and clear picture on any TV
• Extensive connectivity - HDMI, SCART, USB, Ethernet and COAXIAL ports.
• Multimedia from USB - play movies, music and photos directly on the TV.
• Network functions - Ethernet and Wi-Fi Ready for updates and additional online services
• Intelligent remote - learning function allows you to control the decoder and TV with one device
Power adapter with 5 VDC voltage and 2 A current output, equipped with USB type A connector.
• Output voltage 5 VDC
• Output current 2 A
• USB type A port
• Color: black
• Output current 2 A
• USB type A port
• Color: black
Remote control for DVB-T2 receivers: Signal T2-MINI and Signal T2-BOX. It allows simultaneous control of a receiver and TV set (after a simple procedure of programming the remote control).
• Universal learning remote control
• Compatible with Signal T2-MINI and Signal T2-BOX receivers
• Power supply: 2x 1.5 V AAA
• Compatible with Signal T2-MINI and Signal T2-BOX receivers
• Power supply: 2x 1.5 V AAA
Opticum HD AX150 is a DVB-S/S2 digital satellite TV receiver, allowing you to receive free, free-to-air FTA channels.
• Supports SD/HD (MPEG2/MPEG4 H.264), DVB-S/S2 systems
• Reception of free, FTA channels
• Low power consumption in standby mode, below 1 W
• Automatic entry into standby mode after 3 hours
• Supports DiSEqC 1.0, 1.1, 1.2 and USALS systems
• Electronic program guide – EPG
• Multilingual on-screen menus
• Reception of free, FTA channels
• Low power consumption in standby mode, below 1 W
• Automatic entry into standby mode after 3 hours
• Supports DiSEqC 1.0, 1.1, 1.2 and USALS systems
• Electronic program guide – EPG
• Multilingual on-screen menus
The mix440 trans modulator enables conversion of IP streams of up to 200 Mbps in UDP/RTP technology to 4 DVB-T COFDM MUXes.
• The modulator enables conversion of IP stream (200 Mbps) to 4 DVB-T MUXes
• UDP/RTP support for unicast/multicast transmissions (SPTS/MPTS) to DVB-T COFDM standard
• USB connection enabling playback of source material in .ts format
• Possibility of introducing into signal from IP cameras to the DVB-T system
• 4 DVB-T multiplexes at the output
• Supports H.264 and H.265 codecs
• Web-based management
• AGC function (automatic control of signal gain)
• UDP/RTP support for unicast/multicast transmissions (SPTS/MPTS) to DVB-T COFDM standard
• USB connection enabling playback of source material in .ts format
• Possibility of introducing into signal from IP cameras to the DVB-T system
• 4 DVB-T multiplexes at the output
• Supports H.264 and H.265 codecs
• Web-based management
• AGC function (automatic control of signal gain)
The WS-8901U modulator enables conversion of audio/video signal fed to HDMI/CVBS to DVB-T COFDM standard. Mounting in a 19" rack.
• Single channel DVB-T modulator for RACK rack
• H.264 codec compression and maximum bitrate of 20 Mbit/s
• Conversion of signal from any HDMI source
• High quality digital signal of HD standard
• Ideal for SMATV systems, hotels, TV stores, galleries, pubs, etc.
• Easy installation, intuitive configuration.
• H.264 codec compression and maximum bitrate of 20 Mbit/s
• Conversion of signal from any HDMI source
• High quality digital signal of HD standard
• Ideal for SMATV systems, hotels, TV stores, galleries, pubs, etc.
• Easy installation, intuitive configuration.
Single-channel digital HDMI - DVB-T modulator dedicated to small systems.
• Digital HDMI-DVB-T modulator
• Dedicated to small systems
• Distribution of A/V signal in coaxial cable
• High-quality digital signal of Full HD standard (1080P/60 Hz)
• Excellent alternative for splitters and dozens of HDMI cables
• Easy system, intuitive setup
• Dedicated to small systems
• Distribution of A/V signal in coaxial cable
• High-quality digital signal of Full HD standard (1080P/60 Hz)
• Excellent alternative for splitters and dozens of HDMI cables
• Easy system, intuitive setup
The SIGNAL-4K modulator is a professional device that enables the conversion of an HDMI signal in 4K Ultra HD/Full HD resolution to a DVB-T2 digital terrestrial television signal.
• Supports HDMI input up to 4K UHD 2160p
• H.264 or H.265 (HEVC) compression
• RF output in DVB-T2/T/C standard in 4K UHD 2160p resolution
• Programmable channel number and LCN
• Configurable PID, NIT, SID
• Easy installation, intuitive configuration via RJ-45 port (web browser) or buttons located on the front casing
• Ideal for collective TV installations, hotels, RTV shops, galleries, pubs, etc.
• The device is an excellent alternative to installations based on splitters and HDMI cables
• H.264 or H.265 (HEVC) compression
• RF output in DVB-T2/T/C standard in 4K UHD 2160p resolution
• Programmable channel number and LCN
• Configurable PID, NIT, SID
• Easy installation, intuitive configuration via RJ-45 port (web browser) or buttons located on the front casing
• Ideal for collective TV installations, hotels, RTV shops, galleries, pubs, etc.
• The device is an excellent alternative to installations based on splitters and HDMI cables
Modulator Signal-420 HDMI – 1×COFDM (DVB-T) enables the conversion of signals from one HDMI source to the DVB-T standard.
• Proven HDMI-DVB-T modulator in many installations
• Converts signal from any HDMI source
• High quality digital signal in HD/SD standard
• Ideal for collective TV installations, hotels, RTV shops, galleries, pubs, etc.
• Simple installation, intuitive configuration
• Configurable parameters such as LCN, SID, PID, NIT
• Converts signal from any HDMI source
• High quality digital signal in HD/SD standard
• Ideal for collective TV installations, hotels, RTV shops, galleries, pubs, etc.
• Simple installation, intuitive configuration
• Configurable parameters such as LCN, SID, PID, NIT
Signal WS-6990 modulator allows you to convert the signal from a single RCA/HDMI source to the DVB-T/C standard.
• Digital single-channel DVB-T/C modulator
• Adjustable bitrate from 1...20 Mbps or Auto function
• Can connect one HDMI source and modulate it to a DVB-T or DVB-C or ISDB-T multiplex
• Proven in many installations HDMI-DVB-T/C modulator
• Converts signal from any HDMI source
• High quality digital signal in HD/SD standard
• Ideal for collective TV installations, hotels, RTV shops, galleries, pubs, etc.
• Easy installation, intuitive configuration
• Adjustable bitrate from 1...20 Mbps or Auto function
• Can connect one HDMI source and modulate it to a DVB-T or DVB-C or ISDB-T multiplex
• Proven in many installations HDMI-DVB-T/C modulator
• Converts signal from any HDMI source
• High quality digital signal in HD/SD standard
• Ideal for collective TV installations, hotels, RTV shops, galleries, pubs, etc.
• Easy installation, intuitive configuration
Modulator ST-7992 2×HDMI – 2×COFDM (DVB-T)/ 2×QAM(DVB-C) enables the conversion of signals from two HDMI sources to 2 DVB-T/C MUX-es.
• Digital dual channel DVB-T/C modulator
• Capable of connecting two HDMI signal sources and modulating them into two digital DVB-T/C multiplexes
• Proven in many installations HDMI-DVB-T/C modulator
• Converts signal from any HDMI source
• High quality digital signal in HD/SD standard
• Ideal for collective TV installations, hotels, RTV shops, galleries, pubs, etc.
• Easy installation, intuitive configuration
• Capable of connecting two HDMI signal sources and modulating them into two digital DVB-T/C multiplexes
• Proven in many installations HDMI-DVB-T/C modulator
• Converts signal from any HDMI source
• High quality digital signal in HD/SD standard
• Ideal for collective TV installations, hotels, RTV shops, galleries, pubs, etc.
• Easy installation, intuitive configuration
The ST-7990 4×HDMI modulator – 4×COFDM (DVB-T)/4×QAM (DVB-C) enables the conversion of signals from four HDMI sources to 4 DVB-T/C MUX-es.
• Digital four-channel DVB-T/C modulator
• Capable of connecting four HDMI signal sources and modulating them into four digital DVB-T/C multiplexes
• Proven HDMI-DVB-T/C modulator in many installations
• Converts signal from any HDMI source
• High quality digital signal in HD/SD standard
• Ideal for collective TV installations, hotels, RTV shops, galleries, pubs, etc.
• Easy installation, intuitive configuration
• Capable of connecting four HDMI signal sources and modulating them into four digital DVB-T/C multiplexes
• Proven HDMI-DVB-T/C modulator in many installations
• Converts signal from any HDMI source
• High quality digital signal in HD/SD standard
• Ideal for collective TV installations, hotels, RTV shops, galleries, pubs, etc.
• Easy installation, intuitive configuration
The MT41 analogue modulator (dual-band) allows low-frequency signals (RCA connectors) to be converted into high-frequency RF signals.
• Use in individual and community installations
• Output level 85 dBμV
• DSB modulation
• Wide range of output level regulation
• Output level 85 dBμV
• DSB modulation
• Wide range of output level regulation
The MT47 analogue modulator (dual-band) allows low-frequency signals (RCA connectors) to be converted into high-frequency RF signals.
• Use in individual and community installations
• Output level 85 dBμV
• DSB modulation
• Wide range of output level regulation
• Output level 85 dBμV
• DSB modulation
• Wide range of output level regulation
The converter enables HDMI signals to be transmitted using CAT 6 or higher twisted-pair cables. The device is equipped with an IR extender.
• HDMI transmission over a single Cat. 6/6A/7 cable
• Up to 10.2 Gbps data transmission
• 1080p picture mode
• Range over CAT 6/6A/7 twisted pair cable up to 70 m
• IR remote control extender
• Up to 10.2 Gbps data transmission
• 1080p picture mode
• Range over CAT 6/6A/7 twisted pair cable up to 70 m
• IR remote control extender
The converter allows for transmission of HDMI signal over longer distances via minimum cat. 6 twisted pair cable. A USB control extension is provided.
• Transmission via a single cat 6 cable
• Video mode 1080p
• Range over CAT 6 cable up to 70 m
• USB extender
• Video mode 1080p
• Range over CAT 6 cable up to 70 m
• USB extender
The converter enables HDMI (4K) signals to be transmitted using CAT5 or higher twisted-pair cables. The device is equipped with an IR extender.
• Transmission via a single Cat. 6/6A/7 cable
• Data transmission rate of up to 18 Gbps
• 4K x 2K 60 Hz picture mode
• Range over CAT 6/6A/7 up to 60 m - 4K x 2K 30 Hz
• Range over twisted pair cable 6/6A/7 up to 30 m - 4K x 2K 60 Hz
• IR remote control extender
• Data transmission rate of up to 18 Gbps
• 4K x 2K 60 Hz picture mode
• Range over CAT 6/6A/7 up to 60 m - 4K x 2K 30 Hz
• Range over twisted pair cable 6/6A/7 up to 30 m - 4K x 2K 60 Hz
• IR remote control extender
The HDMI to IP converter enables a high-definition (HD) signal to be connected to a receiver (TV, monitor) via an IP network. IR extender.
• Transmission via a single Cat 5e/6 cable
• Low data load on the network
• UDP/IP transmission (multicast)
• Point-to-multipoint connections possible
• 1080p picture mode
• IR remote control extender
• Maximum cable length 100 m
• Low data load on the network
• UDP/IP transmission (multicast)
• Point-to-multipoint connections possible
• 1080p picture mode
• IR remote control extender
• Maximum cable length 100 m
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network. IR extender.
• Transmission via a single cat. 5e/6 cable
• Low data stream load to the network
• UDP/IP transmission (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• IR extender
• Maximum cable length: 100 meters
• Low data stream load to the network
• UDP/IP transmission (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• IR extender
• Maximum cable length: 100 meters
The HDMI fiber optic converter allows for connection of HD signal to a receiver (TV, monitor) via optical network. IR extender.
• Transmission of HDMI signal via one single-mode fiber
• Max. range of 20 km
• Signal source remote control possible - IR signal transmission
• Transmission of SD and HD signals and HD 1080p
• Support for HDCP
• Max. range of 20 km
• Signal source remote control possible - IR signal transmission
• Transmission of SD and HD signals and HD 1080p
• Support for HDCP
The HDMI to IP converter enables the high definition (4K) signal connection to the receiver (TV, monitor) via the IP network. USB extender.
• HDMI transmission using a single cable cat. 5e/6
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 4K
• Maximum cable length 100 m
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 4K
• Maximum cable length 100 m
The HDMI to IP converter enables the high definition (4K) signal connection to the receiver (TV, monitor) via the IP network. USB extender
• HDMI transmission using a single cable cat. 5e/6
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 4K
• Maximum cable length 100 m
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 4K
• Maximum cable length 100 m
The HDMI to IP converter enables a high-definition (HD) signal to be connected to a receiver (TV, monitor) via an IP network. USB extender.
• HDMI transmission over a single CAT 5e/6 cable
• USB extender - DVR control capability
• UDP/IP transmission
• 1080p video mode
• Maximum cable length 100 m
• USB extender - DVR control capability
• UDP/IP transmission
• 1080p video mode
• Maximum cable length 100 m
The HDMI to IP converter enables a high-definition (HD) signal to be connected to a receiver (TV, monitor) via an IP network. USB extender.
• HDMI transmission via one cat 5e/6 cable
• USB extender - DVR control capability
• UDP/IP transmission
• 1080p video mode
• Maximum cable length 100 m
• USB extender - DVR control capability
• UDP/IP transmission
• 1080p video mode
• Maximum cable length 100 m
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network.
• Transmission via a single Cat. 5e/6 cable
• Minimised data stream in the network
• UDP/IP protocol (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• Maximum length of cable: 100 meters
• Minimised data stream in the network
• UDP/IP protocol (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• Maximum length of cable: 100 meters
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network.
• Transmission via a single Cat. 5e/6 cable
• Low data stream load to the network
• UDP/IP transmission (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• Maximum cable length: 100 meters
• Low data stream load to the network
• UDP/IP transmission (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• Maximum cable length: 100 meters
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network. USB extender.
• HDMI transmission using a single cable cat. 5e/6
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 1080p
• Maximum cable length 100 m
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 1080p
• Maximum cable length 100 m
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network. USB extender.
• HDMI transmission using a single cable cat. 5e/6
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 1080p
• Maximum cable length 100 m
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 1080p
• Maximum cable length 100 m
The Signal H3644 HDMI converter enables HDMI signals to be transmitted over long distances using Category 6 or higher twisted-pair cables.
• Transmission via a single Cat. 5/5e/6 6/6A/7 cable
• Transmission speed up to 18 Gbps
• Image type 4K x 2K 60 Hz
• No delays
• Support for DTS, Dolby
• Support for Audio Return Channel (ARC) and S/PDIF
• Bidirectional IR remote control extender
• Transmission speed up to 18 Gbps
• Image type 4K x 2K 60 Hz
• No delays
• Support for DTS, Dolby
• Support for Audio Return Channel (ARC) and S/PDIF
• Bidirectional IR remote control extender
The Etrix GR-24K HDMI Grabber captures video and audio from the HDMI output, converting it into a USB signal seen as a camera on the system.
• HDMI signal capture up to 1080p@60fps
• Low latency ideal for configuring DVRs and rack-mounted devices.
• Plug & Play without installing drivers
• Works with OBS, VLC and other recording software
• USB-C connector for smartphone viewing
• Aluminium casing for effective heat dissipation
• Stable operation without jams or frame loss
• Low latency ideal for configuring DVRs and rack-mounted devices.
• Plug & Play without installing drivers
• Works with OBS, VLC and other recording software
• USB-C connector for smartphone viewing
• Aluminium casing for effective heat dissipation
• Stable operation without jams or frame loss
This HDMI male to HDMI male cable allows the connection of HDMI devices (sat receiver, Blu-ray player, computer, game console etc.) to HD-enabled projector, plasma or LCD TV. The cable transmits both digital video and audio, without any loss in quality.
• Length: 0.5 m
• AWG: 28 (0.321 mm)
• HDMI specification: v1.4
• Max. video resolution 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• AWG: 28 (0.321 mm)
• HDMI specification: v1.4
• Max. video resolution 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
The HDMI Slim cable has small dimensions and reduced minimum bending radius. The use of the cable solves problems such as limited space behind the connected device or dense packing of HDMI inputs, as well can improve the aesthetic qualities of the connection. The cable transmits both digital video a...
• Length: 0.5 m
• Cable diameter: 4 mm
• Plug width (max): 18 mm
• HDMI specification: v1.4
• Max. video resolution ///4096x2160///
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• Cable diameter: 4 mm
• Plug width (max): 18 mm
• HDMI specification: v1.4
• Max. video resolution ///4096x2160///
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
This HDMI male to HDMI male cable allows the connection of HDMI devices (sat receiver, Blu-ray player, computer, game console etc.) to HD-enabled projector, plasma or LCD TV. The cable transmits both digital video and audio, without any loss in quality.
• High quality HDMI cable 1.4 standard compatible
• Max. video resolution 4096x2160
• Two filters
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• Max. video resolution 4096x2160
• Two filters
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
The HDMI Slim cable has small dimensions and reduced minimum bending radius. The use of the cable solves problems such as limited space behind the connected device or dense packing of HDMI inputs, as well can improve the aesthetic qualities of the connection. The cable transmits both digital video a...
• Length: 1 m
• Cable diameter: 4 mm
• Plug width (max): 18 mm
• HDMI specification: v1.4
• Max. video resolution ///4096x2160///
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• Cable diameter: 4 mm
• Plug width (max): 18 mm
• HDMI specification: v1.4
• Max. video resolution ///4096x2160///
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
The HDMI Signal cable meets all the requirements of the HDMI 2.1 standard. It has a small diameter (4 mm) and a short bending radius.
• Length: 1 m,
• HDMI v2.1 standard,
• Cable thickness is 4 mm,
• Plug size 18 mm at the widest point,
• Image transmission at a maximum resolution of 7680×4320p,
• Image transmission at FullHD, UltraHD, 8K,
• Support for dynamic HDR (HDR10+),
• Support for enhanced audio return channel (eARC),
• Maximum bandwidth up to 48Gbps,
• Ethernet channel.
• HDMI v2.1 standard,
• Cable thickness is 4 mm,
• Plug size 18 mm at the widest point,
• Image transmission at a maximum resolution of 7680×4320p,
• Image transmission at FullHD, UltraHD, 8K,
• Support for dynamic HDR (HDR10+),
• Support for enhanced audio return channel (eARC),
• Maximum bandwidth up to 48Gbps,
• Ethernet channel.
This HDMI male to HDMI male cable allows the connection of HDMI devices (sat receiver, Blu-ray player, computer, game console etc.) to HD-enabled projector, plasma or LCD TV. The cable transmits both digital video and audio, without any loss in quality.
• High quality HDMI v1.4 cable
• Max. video resolution of 4096x2160 pixels
• Two RFI filters
• 2-meter long
• Max. video resolution of 4096x2160 pixels
• Two RFI filters
• 2-meter long
The HDMI Slim cable has small dimensions and reduced minimum bending radius. The use of the cable solves problems such as limited space behind the connected device or dense packing of HDMI inputs, as well can improve the aesthetic qualities of the connection. The cable transmits both digital video a...
• Length: 2 m
• Cable diameter: 4 mm
• Plug width (max): 18 mm
• HDMI specification: v1.4
• Max. video resolution 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• Cable diameter: 4 mm
• Plug width (max): 18 mm
• HDMI specification: v1.4
• Max. video resolution 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
This HDMI male to HDMI male cable allows the connection of HDMI devices (sat receiver, Blu-ray player, computer, game console etc.) to HD-enabled projector, plasma or LCD TV. The cable transmits both digital video and audio, without any loss in quality.
• Flat cable, length of 2 m
• HDMI specification v1.4
• Max. video resolution of 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• HDMI specification v1.4
• Max. video resolution of 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
The HDMI Slim cable meets all the requirements of the HDMI 2.1 standard. It has a small diameter (4 mm) and a short bending radius (40 mm).
• Length: 2 m,
• HDMI v2.1 standard,
• Cable thickness is 4 mm,
• Plug size 18 mm at the widest point,
• Image transmission at a maximum resolution of 7680×4320p,
• Image transmission at FullHD, UltraHD, 8K,
• Support for dynamic HDR (HDR10+),
• Support for enhanced audio return channel (eARC),
• Maximum bandwidth
• HDMI v2.1 standard,
• Cable thickness is 4 mm,
• Plug size 18 mm at the widest point,
• Image transmission at a maximum resolution of 7680×4320p,
• Image transmission at FullHD, UltraHD, 8K,
• Support for dynamic HDR (HDR10+),
• Support for enhanced audio return channel (eARC),
• Maximum bandwidth
This HDMI male to HDMI male cable allows the connection of HDMI devices (sat receiver, Blu-ray player, computer, game console etc.) to HD-enabled projector, plasma or LCD TV. The cable transmits both digital video and audio, without any loss in quality.
• High quality HDMI cable v1.4
• Two RFI filters
• Length: 3 m (we also offer cables with other lengths)
• Two RFI filters
• Length: 3 m (we also offer cables with other lengths)
Cable designed to connect HD satellite receivers, game consoles and computers to TV sets. The cable transmits both video and audio.
• Length: 3 m
• Cable diameter: 4 mm
• Plug width (max): 18 mm
• HDMI specification: v1.4
• Max. video resolution 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• Cable diameter: 4 mm
• Plug width (max): 18 mm
• HDMI specification: v1.4
• Max. video resolution 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
Cable designed to connect HD satellite receivers, game consoles and computers to TV sets. The cable transmits both video and audio.
• Flat cable, length of 3 m
• HDMI specification v1.4
• Max. video resolution of 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• HDMI specification v1.4
• Max. video resolution of 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
Cable designed to connect HD satellite receivers, game consoles and computers to TV sets. The cable transmits both video and audio.
• High quality HDMI cable with v1.4 standard
• Transmits video at a maximum resolution of 4096x2160
• Fitted with anti-interference filters
• Length of 5 m
• FullHD video transmission
• Vibrant and natural colors through the use of Deep Color function - image transmission in 48 bit
• 3D image transmission
• Reverse audio channel
• Ethernet channel
• Transmits video at a maximum resolution of 4096x2160
• Fitted with anti-interference filters
• Length of 5 m
• FullHD video transmission
• Vibrant and natural colors through the use of Deep Color function - image transmission in 48 bit
• 3D image transmission
• Reverse audio channel
• Ethernet channel
Cable designed to connect HD satellite receivers, game consoles and computers to TV sets. The cable transmits both video and audio.
• Flat cable, length of 5 m
• HDMI specification v1.4
• Max. video resolution of 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• HDMI specification v1.4
• Max. video resolution of 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
Cable designed to connect HD satellite receivers, games consoles and computers to televisions. The cable transmits both video and audio.
• Length 5 m
• Supports HDMI 2.0 standard - 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10
• AUDIO return channel
• Ethernet channel
• Supports HDMI 2.0 standard - 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10
• AUDIO return channel
• Ethernet channel
Cable designed to connect HD satellite receivers, game consoles and computers to TV sets. The cable transmits both video and audio.
• 7m HDMI flat cable
• HDMI v1.4 standard
• Image transmission at a maximum resolution of 4096x2160
• FullHD video transmission
• Vibrant and natural colors through the use of Deep Color function - image transmission in 48 bit
• 3D image transmission
• Reverse audio channel
• Ethernet channel
• HDMI v1.4 standard
• Image transmission at a maximum resolution of 4096x2160
• FullHD video transmission
• Vibrant and natural colors through the use of Deep Color function - image transmission in 48 bit
• 3D image transmission
• Reverse audio channel
• Ethernet channel
Cable designed to connect HD satellite receivers, games consoles and computers to televisions. The cable transmits both video and audio.
• 7 m length
• Supports HDMI 2.0 standard - 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10
• AUDIO return channel
• Ethernet channel
• Supports HDMI 2.0 standard - 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10
• AUDIO return channel
• Ethernet channel
Cable designed to connect HD satellite receivers, game consoles and computers to TV sets. The cable transmits both video and audio.
• Length: 10 m
• AWG: 28 (0.321 mm)
• Two filters
• HDMI specification: v1.4
• Max. video resolution: 4096x2160
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• AWG: 28 (0.321 mm)
• Two filters
• HDMI specification: v1.4
• Max. video resolution: 4096x2160
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
Cable designed to connect HD satellite receivers, game consoles and computers to TV sets. The cable transmits both video and audio.
• 10m HDMI flat cable
• HDMI v1.4 standard
• Image transmission at a maximum resolution of 4096x2160
• FullHD image transmission
• Vibrant and natural colors through the use of Deep Color function - image transmission in 48 bit
• 3D image transmission
• Reverse audio channel
• Ethernet channel
• HDMI v1.4 standard
• Image transmission at a maximum resolution of 4096x2160
• FullHD image transmission
• Vibrant and natural colors through the use of Deep Color function - image transmission in 48 bit
• 3D image transmission
• Reverse audio channel
• Ethernet channel
Cable designed to connect HD satellite receivers, games consoles and computers to televisions. The cable transmits both video and audio.
• 10 m length
• Supports HDMI 2.0 standard - 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10
• AUDIO return channel
• Ethernet channel
• Supports HDMI 2.0 standard - 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10
• AUDIO return channel
• Ethernet channel
Cable designed to connect HD satellite receivers, game consoles and computers to TV sets. The cable transmits both video and audio.
• High quality HDMI cable with v1.4 standard
• Transmits video at a maximum resolution of 4096x2160
• Fitted with anti-interference filters
• Length of 15 m
• FullHD video transmission
• Vibrant and natural colors through the use of Deep Color function - image transmission in 48 bit
• 3D image transmission
• Reverse audio channel
• Ethernet channel
• Transmits video at a maximum resolution of 4096x2160
• Fitted with anti-interference filters
• Length of 15 m
• FullHD video transmission
• Vibrant and natural colors through the use of Deep Color function - image transmission in 48 bit
• 3D image transmission
• Reverse audio channel
• Ethernet channel
Cable designed to connect HD satellite receivers, game consoles and computers to TV sets. The cable transmits both video and audio.
• High quality HDMI cable with v1.4 standard
• Transmits video at a maximum resolution of 4096x2160
• Fitted with anti-interference filters
• Length of 20 m
• FullHD video transmission
• Vibrant and natural colors through the use of Deep Color function - image transmission in 48 bit
• 3D image transmission
• Reverse audio channel
• Ethernet channel
• Transmits video at a maximum resolution of 4096x2160
• Fitted with anti-interference filters
• Length of 20 m
• FullHD video transmission
• Vibrant and natural colors through the use of Deep Color function - image transmission in 48 bit
• 3D image transmission
• Reverse audio channel
• Ethernet channel
The cable is designed to connect HD satellite receivers, game consoles and computers to TVs. The cable transmits both video and sound.
• Length: 30 m
• Support for HDMI 2.0 – 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10
• AUDIO return channel
• Ethernet channel
• High flexibility
• Support for HDMI 2.0 – 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10
• AUDIO return channel
• Ethernet channel
• High flexibility
Cable designed to connect HD satellite receivers, game consoles and computers to TV sets. The cable transmits both video and audio.
• Length: 50 m
• Support for HDMI 2.0 – 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10, HDCP 2.2
• AUDIO return channel
• Ethernet channel
• High flexibility
• Support for HDMI 2.0 – 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10, HDCP 2.2
• AUDIO return channel
• Ethernet channel
• High flexibility
Cable designed to connect HD satellite receivers, game consoles and computers to TV sets. The cable transmits both video and audio.
• Length: 70 m
• Support for HDMI 2.0 – 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10
• AUDIO return channel
• Ethernet channel
• High flexibility
• Support for HDMI 2.0 – 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10
• AUDIO return channel
• Ethernet channel
• High flexibility
The HDMI female to HDMI female adapter (gender changer) allows to connect two typical HDMI cables.
• For connecting two HDMI cables
• High quality
• High quality
The HDMI plug to HDMI socket adapter is used to connect the signal cable to the HDMI receiver (transmitter).
• Possibility to change the angle (180º) between inlet and outlet
• Ideal for connecting devices in hard-to-reach places
• Ideal for connecting devices in hard-to-reach places
The HDMI socket to HDMI plug adapter enables the cable to be easily connected to the connector on the receiver at a 90-degree angle.
• Possibility to change the angle (90º) between input and outlet
• Ideal for connecting devices in hard-to-reach places
• Ideal for connecting devices in hard-to-reach places
Cable with a lenght of 2 m enabling audio/video transmission between devices equipped with a DisplayPort connector.
• Length: 2 m
• Connectors: DP-DP
• Max. resolution: 4K
• Connectors: DP-DP
• Max. resolution: 4K
Cable with a lenght of 2m for audio/video transmission between DisplayPort and HDMI devices.
• Length: 2 m
• Connectors: DisplayPort - HDMI
• Connectors: DisplayPort - HDMI
Signal HD's 3x1 Maki HDMI switch enables 3 high definition (HD) devices to be connected to a TV set equipped with an HDMI connector.
• Connection of 3 sources of high-definition signals to one HDMI input
• Support for HDMI 2.0
• Support for 4K x 2K resolution
• Support for 3D
• Remote control
• Support for HDMI 2.0
• Support for 4K x 2K resolution
• Support for 3D
• Remote control
Signal HD's HDMI 1x2 splitter allows HDMI signals to be distributed to two TV sets simultaneously.
• Signal distribution to 2 TVs
• Supports HDMI 2.0 standard
• Supports 4Kx2K 60 Hz resolution
• Supports DTS Digital, Dolby Digital, DTS-HD audio compression
• Supports HDMI 2.0 standard
• Supports 4Kx2K 60 Hz resolution
• Supports DTS Digital, Dolby Digital, DTS-HD audio compression
The HDMI 1x4 splitter makes it possible to distribute the HDMI signal to four TV sets at the same time. In addition, the device supports EDID functions.
• Signal distribution to 4 TVs
• EDID function
• Supports HDMI 2.0 standard
• Supports 4Kx2K 60 Hz resolution
• Supports DTS Digital, Dolby Digital, DTS-HD, Dolby True HD audio compression
• EDID function
• Supports HDMI 2.0 standard
• Supports 4Kx2K 60 Hz resolution
• Supports DTS Digital, Dolby Digital, DTS-HD, Dolby True HD audio compression
Signal HD's HDMI 1x8 splitter allows HDMI signals to be distributed to up to eight TV sets simultaneously.
• Signal distribution to up to 8 TVs
• Supports HDMI 2.0 standard
• Supports 4Kx2K 60 Hz resolution
• Supports DTS Digital, Dolby Digital, DTS-HD audio compression
• Supports HDMI 2.0 standard
• Supports 4Kx2K 60 Hz resolution
• Supports DTS Digital, Dolby Digital, DTS-HD audio compression
The Signal Repeater makes it possible to create long connections via HDMI cable. The devices must be installed between the long cables.
• HDMI regeneration
• Possibility of transmitting HDMI signals over distances up to 45 m
• Transmission of HD video up to 1080p
• Quick and easy installation
• Possibility of transmitting HDMI signals over distances up to 45 m
• Transmission of HD video up to 1080p
• Quick and easy installation
The sti441C streamer enables conversion of DVB-T/T2/C signals from 4 multiplexes to IP standard (multicast) with a maximum throughput of 200 Mbps.
• Conversion of 4xDVB-T/T2/C signals to IP stream
• Conversion of 4 digital multiplexes (1 panel)
• USB connector for playback of source material in .ts format
• Built-in 2 CI slots for decoding encrypted channels
• IP multicast stream with maximum bandwidth of 200 Mbps – low use of LAN resources
• Possibility to create thematic (or e.g. language) lists of channels automatically detected by receivers
• Possibility of watching TV on PCs and laptops with free software installed
• Receivers equipped with recording functions and other multimedia functions (Youtube, etc.)
• Use of twisted-pair cable as a transmission medium
• Easy transmission of TV signal over long distances (fiber optic cable)
• Conversion of 4 digital multiplexes (1 panel)
• USB connector for playback of source material in .ts format
• Built-in 2 CI slots for decoding encrypted channels
• IP multicast stream with maximum bandwidth of 200 Mbps – low use of LAN resources
• Possibility to create thematic (or e.g. language) lists of channels automatically detected by receivers
• Possibility of watching TV on PCs and laptops with free software installed
• Receivers equipped with recording functions and other multimedia functions (Youtube, etc.)
• Use of twisted-pair cable as a transmission medium
• Easy transmission of TV signal over long distances (fiber optic cable)
The VSA N5 WiFi 4K H.265/HEVC IPTV Digital Receiver enables reception of TV signals on IP-based broadband networks broadcast in MPEG-2, H.264 and H.265/HEVC technologies, both in high definition 4K UHD with HDR.
• Receiver dedicated for IPTV systems
• Resolution: 4K/p60 HDR
• HDMI CEC function support
• PAL upscaling to 720p, 1080i, 1080p
• Functional and clear Electronic Program Guide (EPG)
• Separate lists of favorite, TV, and radio channels
• Recording option, access to selected web services (YouTube etc.)
• Support for teletext and subtitles
• Support for MPEG-2 and MPEG-4 AVC/H.264
• Built-in multimedia player (including HD movies, music, pictures)
• Resolution: 4K/p60 HDR
• HDMI CEC function support
• PAL upscaling to 720p, 1080i, 1080p
• Functional and clear Electronic Program Guide (EPG)
• Separate lists of favorite, TV, and radio channels
• Recording option, access to selected web services (YouTube etc.)
• Support for teletext and subtitles
• Support for MPEG-2 and MPEG-4 AVC/H.264
• Built-in multimedia player (including HD movies, music, pictures)
The 8xDVB-S/S2 (8PSK, QPSK) - 4xDVB-T (COFDM) tdx441 FTA transmodulator allows the conversion of DVB-S/S2 signals from 8 satellite transponders to 4 DVB-T MUXes.
• DVB-S/S2 signal conversion from 8 satellite transponders to 4 DVB-T COFDM multiplexes
• FTA free-to-air programmes
• Reception of 8 satellite transponders and conversion to any 4 DVB-T multiplexes
• Channel selection and filtering of unnecessary services in the digital stream
• Compatible with dSCR/Unicable multiswitch series
• Control via RJ-45 port, which greatly simplifies the installation procedure
• Internet management
• Reading the history of events (logs) from the panel
• AGC function (automatic control of signal amplification)
• FTA free-to-air programmes
• Reception of 8 satellite transponders and conversion to any 4 DVB-T multiplexes
• Channel selection and filtering of unnecessary services in the digital stream
• Compatible with dSCR/Unicable multiswitch series
• Control via RJ-45 port, which greatly simplifies the installation procedure
• Internet management
• Reading the history of events (logs) from the panel
• AGC function (automatic control of signal amplification)
The 2xDVB-T/T2/C - 2xDVB-T (COFDM) ttx420 FTA transmodulator enables the conversion of DVB-T/T2/C signals from 2 MUXes to 2 DVB-T COFDM MUXes.
• Conversion of DVB-T/T2/C signal from 2 MUX to 2 DVB-T COFDM multiplexes
• Choice of operation: transparent or multiplexed
• Channel selection and filtering of unnecessary services in the digital stream
• Control via RJ-45 port, which greatly simplifies the installation procedure
• Internet management
• Reading the history of events (logs) from the panel
• AGC function (automatic control of signal amplification)
• Choice of operation: transparent or multiplexed
• Channel selection and filtering of unnecessary services in the digital stream
• Control via RJ-45 port, which greatly simplifies the installation procedure
• Internet management
• Reading the history of events (logs) from the panel
• AGC function (automatic control of signal amplification)
The tdx420 2xDVB-S/S2 (8PSK, QPSK) - 2xDVB-T (COFDM) FTA transmodulator enables the conversion of DVB-S/S2 signals from 2 satellite transponders to 2 DVB-T MUXes.
• Conversion of DVB-S/S2 signals to DVB-T COFDM standard
• 2 SAT transponders for 2 DVB-T MUXes
• FTA non-coded programs
• Possibility to create one DVB-T MUX from two SAT transponders
• Channel selection and filtering of unnecessary services in the digital stream
• Simple control interface via RJ-45 port, which greatly simplifies the installation procedure
• Internet management
• Reading of event history (logs) from the panel
• AGC function (automatic signal gain control)
• 2 SAT transponders for 2 DVB-T MUXes
• FTA non-coded programs
• Possibility to create one DVB-T MUX from two SAT transponders
• Channel selection and filtering of unnecessary services in the digital stream
• Simple control interface via RJ-45 port, which greatly simplifies the installation procedure
• Internet management
• Reading of event history (logs) from the panel
• AGC function (automatic signal gain control)
The tdx420c 2xDVB-S/S2 (8PSK, QPSK) - 2xDVB-T (COFDM) transmodulator with a double CI slot enables the conversion of DVB-S/S2 signals from 2 satellite transponders to 2 DVB-T MUXes.
• Conversion of DVB-S/S2 signals to DVB-T COFDM standard
• 2 SAT transponders for 2 DVB-T MUXes
• Possibility to create one DVB-T MUX from two SAT transponders
• Channel selection and filtering of unnecessary services in the digital stream
• Simple control interface via RJ-45 port, which greatly simplifies the installation procedure
• 2 CI ports (multidescrambling)
• Internet management
• Reading of event history (logs) from the panel
• AGC function (automatic signal gain control)
• 2 SAT transponders for 2 DVB-T MUXes
• Possibility to create one DVB-T MUX from two SAT transponders
• Channel selection and filtering of unnecessary services in the digital stream
• Simple control interface via RJ-45 port, which greatly simplifies the installation procedure
• 2 CI ports (multidescrambling)
• Internet management
• Reading of event history (logs) from the panel
• AGC function (automatic signal gain control)
The 8xDVB-S/S2 (8PSK, QPSK) - 8xDVB-T (COFDM) tdx481 FTA transmodulator allows the conversion of DVB-S/S2 signals from 8 satellite transponders to 8 DVB-T MUXes.
• Conversion of DVB-S/S2 signal from 8 satellite transponders to 8 DVB-T COFDM multiplexes
• FTA free-to-air programmes
• Reception of 8 satellite transponders and conversion to any 8 DVB-T multiplexes
• Channel selection and filtering of unnecessary services in the digital stream
• Compatible with dSCR/Unicable multiswitch series
• Control via RJ-45 port, which greatly simplifies the installation procedure
• Internet management
• Reading the history of events (logs) from the panel
• AGC function (automatic control of signal amplification)
• FTA free-to-air programmes
• Reception of 8 satellite transponders and conversion to any 8 DVB-T multiplexes
• Channel selection and filtering of unnecessary services in the digital stream
• Compatible with dSCR/Unicable multiswitch series
• Control via RJ-45 port, which greatly simplifies the installation procedure
• Internet management
• Reading the history of events (logs) from the panel
• AGC function (automatic control of signal amplification)
The mix440 trans modulator enables conversion of IP streams of up to 200 Mbps in UDP/RTP technology to 4 DVB-C QAM MUXes.
• Modulator enables conversion of IP stream (200 Mbit/s) to 4 DVB-C MUX
• UDP/RTP support for unicast/multicast transmissions (SPTS/MPTS) to DVB-C QAM standard
• USB connection enabling playback of source material in .ts format
• Ability to integrate signals from IP cameras into a DVB-C installation
• 4 DVB-C multiplexes at the output
• Supports H.264 and H.265 codecs
• Internet management
• AGC function (automatic control of signal amplification)
• UDP/RTP support for unicast/multicast transmissions (SPTS/MPTS) to DVB-C QAM standard
• USB connection enabling playback of source material in .ts format
• Ability to integrate signals from IP cameras into a DVB-C installation
• 4 DVB-C multiplexes at the output
• Supports H.264 and H.265 codecs
• Internet management
• AGC function (automatic control of signal amplification)
The tdq 4202xDVB-S/S2 (8PSK, QPSK) - 2xDVB-C (QAM) FTA transmodulator enables the conversion of DVB-S/S2 signals from 2 satellite transponders to 2 DVB-C MUXes.
• Conversion of DVB-S/S2 signals to DVB-C QAM standard
• Conversion of the whole package of signals from two satellite transponders to 2 adjacent DVB-C multiplexes
• Possibility to create one DVB-C multiplex from two different satellite transponders
• Channel selection and filtering of unnecessary services in the digital stream
• Simple control interface via RJ-45 port, which greatly simplifies the installation procedure
• Management via the Internet
• Reading of event history (logs) from the panel
• AGC function (automatic signal gain control)
• Conversion of the whole package of signals from two satellite transponders to 2 adjacent DVB-C multiplexes
• Possibility to create one DVB-C multiplex from two different satellite transponders
• Channel selection and filtering of unnecessary services in the digital stream
• Simple control interface via RJ-45 port, which greatly simplifies the installation procedure
• Management via the Internet
• Reading of event history (logs) from the panel
• AGC function (automatic signal gain control)
The tdq420c 2xDVB-S/S2 (8PSK, QPSK) - 2xDVB-C (QAM) transmodulator with a double CI slot enables the conversion of DVB-S/S2 signals from 2 satellite transponders to 2 DVB-C MUXes.
• Conversion of DVB-S/S2 signals to DVB-C QAM standard
• 2 SAT transponders for 2 DVB-C MUXes
• Possibility to create one DVB-C MUX from two SAT transponders
• Channel selection and filtering of unnecessary services in the digital stream
• Simple control interface via RJ-45 port, which greatly simplifies the installation procedure
• 2 CI ports (multidescrambling)
• Internet management
• Reading of event history (logs) from the panel
• AGC function (automatic signal gain control)
• 2 SAT transponders for 2 DVB-C MUXes
• Possibility to create one DVB-C MUX from two SAT transponders
• Channel selection and filtering of unnecessary services in the digital stream
• Simple control interface via RJ-45 port, which greatly simplifies the installation procedure
• 2 CI ports (multidescrambling)
• Internet management
• Reading of event history (logs) from the panel
• AGC function (automatic signal gain control)
The tdq441 transmodulator converts the DVB-S/S2(8PSK, QPSK) signal to 4 DVB-C QAM MUXes.
• DVB-S/S2 signal conversion from 8 satellite transponders to 4 DVB-C QAM multiplexes
• FTA free-to-air programmes
• Reception of 8 satellite transponders and conversion to any 4 DVB-C multiplexes
• Channel selection and filtering of unnecessary services in the digital stream
• Compatible with dSCR/Unicable multiswitch series
• Control via RJ-45 port, which greatly simplifies the installation procedure
• Internet management
• Reading the history of events (logs) from the panel
• AGC function (automatic control of signal amplification)
• FTA free-to-air programmes
• Reception of 8 satellite transponders and conversion to any 4 DVB-C multiplexes
• Channel selection and filtering of unnecessary services in the digital stream
• Compatible with dSCR/Unicable multiswitch series
• Control via RJ-45 port, which greatly simplifies the installation procedure
• Internet management
• Reading the history of events (logs) from the panel
• AGC function (automatic control of signal amplification)
The tdq481c8xDVB-S/S2 (8PSK, QPSK) - 8xDVB-C (QAM) FTA transmodulator enables the conversion of DVB-S/S2 signals from 8 satellite transponders to 8 DVB-C MUXes.
• DVB-S/S2 signal conversion from 8 satellite transponders to 8 DVB-C QAM multiplexes
• FTA free-to-air programmes
• Reception of 8 satellite transponders and conversion to any 8 DVB-C multiplexes
• Channel selection and filtering of unnecessary services in the digital stream.
• Compatible with dSCR/Unicable multiswitch series
• Control via RJ-45 port, which greatly simplifies the installation procedure
• Internet management
• Reading the history of events (logs) from the panel
• AGC function (automatic control of signal amplification)
• FTA free-to-air programmes
• Reception of 8 satellite transponders and conversion to any 8 DVB-C multiplexes
• Channel selection and filtering of unnecessary services in the digital stream.
• Compatible with dSCR/Unicable multiswitch series
• Control via RJ-45 port, which greatly simplifies the installation procedure
• Internet management
• Reading the history of events (logs) from the panel
• AGC function (automatic control of signal amplification)
Universal DIN rail mounting bracket matching 19-inch RACK cabinets. Height: 1U, color: white.
• Universal DIN rail for RACK cabinets
• Height: 1U
• Color: white
• Height: 1U
• Color: white
The 4U height mounting plate with DIN rail is designed for mounting DIN rail devices in the rear of a 19" RACK cabinet.
• DIN TH-35 rail
• RACK bracket
• Height: 4U
• RACK bracket
• Height: 4U
The CD001 metal housing with DIN rail BD001 mounted on the rear panel is designed for mounting devices, in particular TERRA headend components.
• Compact dimensions
• For TERRA headend
• For TERRA headend
The fan panel is used to cool the equipment housed in the CD001 metal housing for the TERRA headend.
• Fan panel designed to cool the devices in the CD001 metal housing
• 3 fans
• Thermostat
• 3 fans
• Thermostat
The mounting plate ID001 with DIN rail mounting is designed for mounting additional devices (multiswitches srm-522, ethernet switches) in metal housing CD001 with the DIN rail BD001.
• Accessory for the CD001 housing with BD001 DIN rail Terra
• Intended for mounting additional devices (srm-522 multiswitches, ethernet switches)
• Intended for mounting additional devices (srm-522 multiswitches, ethernet switches)
![Coaxial cable 75 Ohm TRISET 302 Eca class A+ 1.02/4.6/7.0 110 dB [100 m]](https://www.dipol.com.pl/img/thumbnails/e1005_100+.jpg/3485ddf65185708132bcd177ab8bdd94.jpg)
TRISET 302 Eca Tri-shield type in PVC jacket intended for the construction of TV/SAT systems. Fire reaction class in accordance with CPR - Eca.
• Conforms to class A+ standard
• Flammability class Eca
• Cable type RG-6
• Copper core 1.02 mm
• Conductor of tri-shield construction
• Made in PVC sheath
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the requirement of class A++
• Min. 77% braid coverage
• Flammability class Eca
• Cable type RG-6
• Copper core 1.02 mm
• Conductor of tri-shield construction
• Made in PVC sheath
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the requirement of class A++
• Min. 77% braid coverage
![Coaxial cable 75 Ohm TRISET 302 Eca class A+ 1.02/4.6/7.0 110 dB [250 m]](https://www.dipol.com.pl/img/thumbnails/e1005_250+.jpg/f551947d3c11807563d82b17a636d7cd.jpg)
TRISET 302 Eca Tri-shield type made in PVC jacket intended for the construction of RTV/SAT installations. Fire reaction class in accordance with CPR - Eca.
• Conforms to class A+ standard
• Flammability class Eca
• Cable type RG-6
• Copper core 1.02 mm
• Conductor of tri-shield construction
• Made in PVC sheath
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the requirement of class A++
• Min. 77% braid coverage
• Flammability class Eca
• Cable type RG-6
• Copper core 1.02 mm
• Conductor of tri-shield construction
• Made in PVC sheath
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the requirement of class A++
• Min. 77% braid coverage
![Coaxial cable 75 Ohm TRISET 302 Eca class A+ 1.02/4.6/7.0 110 dB [500 m]](https://www.dipol.com.pl/img/thumbnails/e1005_500+.jpg/2c64860f51cff4dcded36ce1f3dbeaeb.jpg)
TRISET 302 Eca Tri-shield type made in PVC jacket intended for the construction of RTV/SAT installations. Fire reaction class in accordance with CPR - Eca.
• Compliant with class A+ standard
• Flammability class Eca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PVC jacket
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
• Flammability class Eca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PVC jacket
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
![Coaxial cable 75 Ohm TRISET 302 Dca class A+ 1.02/4.6/7.0 110 dB [500 m]](https://www.dipol.com.pl/img/thumbnails/e1006_500+.jpg/e99b5303bd58db2e71d6f663ec303518.jpg)
TRISET 302 Dca, Tri-shield type, made with LSZH jacket, intended for the construction of RTV/SAT installations. Reaction to fire class according to CPR - Dca-s2, d1, a1.
• Compliant with the class A+ standard
• Flammability class Dca-s2, d1, a1
• 1.02 mm copper core
• Cable with tri-shield construction - triple screen
• Made in LSZH (LS0H) jacket - halogen-free insulation
• Low attenuation
• Excellent fit
• High shielding effectiveness - in the frequency band up to 2 GHz it meets the requirement of class A++
• Min. 77% braid coverage
• Flammability class Dca-s2, d1, a1
• 1.02 mm copper core
• Cable with tri-shield construction - triple screen
• Made in LSZH (LS0H) jacket - halogen-free insulation
• Low attenuation
• Excellent fit
• High shielding effectiveness - in the frequency band up to 2 GHz it meets the requirement of class A++
• Min. 77% braid coverage
![Coaxial cable 75 Ohm TRISET 302 B2ca class A+ 1.02/4.6/7.0 110 dB [500 m]](https://www.dipol.com.pl/img/thumbnails/e1007_500+.jpg/dbcf7cbabe1881edb010590046b3e334.jpg)
TRISET 302 B2ca, Tri-shield type, made with LSZH jacket, intended for the construction of RTV/SAT installations. Reaction to fire class according to CPR - B2ca-s1a, d1, a1.
• Compliant with the class A+ standard
• Flammability class B2ca-s1a, d1, a1
• 1.02 mm copper core
• Cable with tri-shield construction - triple screen
• Made in LSZH (LS0H) jacket - halogen-free insulation
• Low attenuation
• Excellent fit
• High shielding effectiveness - in the frequency band up to 2 GHz it meets the requirement of class A++
• Min. 77% braid coverage
• Flammability class B2ca-s1a, d1, a1
• 1.02 mm copper core
• Cable with tri-shield construction - triple screen
• Made in LSZH (LS0H) jacket - halogen-free insulation
• Low attenuation
• Excellent fit
• High shielding effectiveness - in the frequency band up to 2 GHz it meets the requirement of class A++
• Min. 77% braid coverage
![Coaxial cable 75 Ohm TRISET 302 Fca class A+ 1.02/4.6/7.0 110 dB [100 m]](https://www.dipol.com.pl/img/thumbnails/e1008_100+.jpg/b86956f9c39f6480aa44d79932f2a4a2.jpg)
TRISET 302 Fca Tri-shield type, external made in PE jacket intended for the construction of RTV/SAT installations. Fire reaction class in accordance with CPR - Fca.
• Compliant with class A+ standard
• Flammability class Fca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PE jacket
• External cable
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
• Flammability class Fca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PE jacket
• External cable
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
![Coaxial cable 75 Ohm TRISET 302 Fca class A+ 1.02/4.6/7.0 110 dB [250 m]](https://www.dipol.com.pl/img/thumbnails/e1008_250+.jpg/753ed42ed78da9dd670a0377e49b1f70.jpg)
TRISET 302 Fca Tri-shield type, external made in PE jacket intended for the construction of RTV/SAT installations. Fire reaction class in accordance with CPR - Fca.
• Compliant with class A+ standard
• Flammability class Fca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PE jacket
• External cable
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
• Flammability class Fca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PE jacket
• External cable
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
![Coaxial cable 75 Ohm TRISET 302 Fca class A+ 1.02/4.6/7.0 110 dB [500 m]](https://www.dipol.com.pl/img/thumbnails/e1008_500+.jpg/8bce782df80cc7d49b4dcb3f97ca1df6.jpg)
TRISET 302 Fca Tri-shield type, external made in PE casing intended for the construction of RTV/SAT installations. Fire reaction class in accordance with CPR - Fca.
• Compliant to class A+ standard
• Flammability class Fca
• Copper core 1.02 mm
• Conductor of tri-shield construction
• Made in PE sheath
• Outdoor cable
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the requirement of class A+++
• Min. 77% braid coverage
• Flammability class Fca
• Copper core 1.02 mm
• Conductor of tri-shield construction
• Made in PE sheath
• Outdoor cable
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the requirement of class A+++
• Min. 77% braid coverage
![Coaxial Cable (75 ohm, class A): TRISET-113 1.13/4.8/6.8 100 dB [1 m]](https://www.dipol.com.pl/img/thumbnails/e1015+++.jpg/0d08ac94851f35a0e1e5b02f5f7afe44.jpg)
TRISET-113 (internal) double shielded RG6 type coaxial cable has the inner conductor made of 1.13 mm diameter copper wire.
• Designed for all kinds of systems, particularly for terrestrial and satellite TV systems
• PVC sheath - inner cable
• Screening class: A
• Copper core 1.13 mm
• Aluminum braid 81%
• Double screen: foil/sheath
• CPR Class: Eca
• Sold per meters
• PVC sheath - inner cable
• Screening class: A
• Copper core 1.13 mm
• Aluminum braid 81%
• Double screen: foil/sheath
• CPR Class: Eca
• Sold per meters
![Coaxial Cable (75 ohm, class A): TRISET-113 1.13/4.8/6.8 [100 m]](https://www.dipol.com.pl/img/thumbnails/e1015_100+.jpg/2e94b5d9ca3b921cde798644fb9d48d5.jpg)
TRISET-113 (internal) double shielded RG6 type coaxial cable has the inner conductor made of 1.13 mm diameter copper wire.
• Designed for all kinds of systems, particularly for terrestrial and satellite TV systems
• PVC sheath - inner cable
• Screening class: A
• Copper core 1.13 mm
• Aluminum braid 81%
• Double screen: foil/sheath
• CPR Class: Eca
• 100 meters
• PVC sheath - inner cable
• Screening class: A
• Copper core 1.13 mm
• Aluminum braid 81%
• Double screen: foil/sheath
• CPR Class: Eca
• 100 meters
![Coaxial Cable (75 ohm, class A): TRISET-113 1.13/4.8/6.8 100 dB [200 m]](https://www.dipol.com.pl/img/thumbnails/e1015_200+.jpg/7d2b29aae19d7398dd79d3c23fff19fe.jpg)
TRISET-113 (internal) double shielded RG6 type coaxial cable has the inner conductor made of 1.13 mm diameter copper wire.
• Designed for all kinds of systems, particularly for terrestrial and satellite TV systems
• PVC sheath - inner cable
• Screening class: A
• Copper core 1,13 mm
• Aluminum braid 81%
• Double screen: foil/sheath
• CPR Class: Eca
• 200 meters
• PVC sheath - inner cable
• Screening class: A
• Copper core 1,13 mm
• Aluminum braid 81%
• Double screen: foil/sheath
• CPR Class: Eca
• 200 meters
![Coaxial Cable (75 ohm, class A): TRISET-113 1.13/4.8/6.8 100 dB [500 m]](https://www.dipol.com.pl/img/thumbnails/e1015_500+.jpg/5cbcfe3443448c1c49311d7f0f0c1713.jpg)
TRISET-113 (internal) double shielded RG6 type coaxial cable has the inner conductor made of 1.13 mm diameter copper wire.
• Designed for all kinds of systems, particularly for terrestrial and satellite TV systems
• PVC sheath - inner cable
• Screening class: A
• Copper core 1,13 mm
• Aluminum braid 81%
• Double screen: foil/sheath
• CPR Class: Eca
• 500 meters
• PVC sheath - inner cable
• Screening class: A
• Copper core 1,13 mm
• Aluminum braid 81%
• Double screen: foil/sheath
• CPR Class: Eca
• 500 meters
![Coaxial cable (75 ohm, class A+): TRISET PLUS Dca LSZH<br>1,13/4,8/6,8 110 dB [100 m]](https://www.dipol.com.pl/img/thumbnails/e1016_100+.jpg/2eedcd00a5cb9c30d78c338d11e8dae0.jpg)
High quality TRISET PLUS coaxial cable is dedicated for individual and community antenna systems. Complies with A+ class requirements.
• Complies with A+ class requirements
• Reaction to fire class compliant with CPR - Dca-s2, d1, a1
• Triple shield Al/PET/SY foil (first) bonded to the dielectric + 81% density braid + Al/PET foil (second) bonded to the sheath
• Passed IEC 68-2-3 Steady State Damp Heat test
• 1.13 mm copper core
• Low loss
• Excellent impedance matching
• High screening efficiency - meeting the class A++ requirements in most of the range
• 81% braid coverage
• 5-year warranty
• Reaction to fire class compliant with CPR - Dca-s2, d1, a1
• Triple shield Al/PET/SY foil (first) bonded to the dielectric + 81% density braid + Al/PET foil (second) bonded to the sheath
• Passed IEC 68-2-3 Steady State Damp Heat test
• 1.13 mm copper core
• Low loss
• Excellent impedance matching
• High screening efficiency - meeting the class A++ requirements in most of the range
• 81% braid coverage
• 5-year warranty
![Coaxial cable (75 ohm, class A+): TRISET PLUS Dca LSZH<br>1,13/4,8/6,8 110 dB [500 m]](https://www.dipol.com.pl/img/thumbnails/e1016_500+.jpg/99096c8956274c118003137e395dd9ab.jpg)
High quality TRISET PLUS coaxial cable is dedicated for individual and community antenna systems. Complies with A+ class requirements.
• Conforms to Class A+ standard
• Reaction to fire class in accordance with CPR - Dca-s2, d1, a1
• Made in LSZH jacket (LS0H) - halogen-free insulation
• Triple screen - first Al/PET/SY foil bonded to dielectric + 81% braid + second Al/PET foil bonded to jacket
• Conforms to IEC68-2 part 3 accelerated ageing standard
• Copper core 1.13 mm
• Low attenuation
• Excellent fit
• High screening efficiency - fulfils class A+++ requirement in most of the range
• 81% braid coverage
• 5 year warranty
• Reaction to fire class in accordance with CPR - Dca-s2, d1, a1
• Made in LSZH jacket (LS0H) - halogen-free insulation
• Triple screen - first Al/PET/SY foil bonded to dielectric + 81% braid + second Al/PET foil bonded to jacket
• Conforms to IEC68-2 part 3 accelerated ageing standard
• Copper core 1.13 mm
• Low attenuation
• Excellent fit
• High screening efficiency - fulfils class A+++ requirement in most of the range
• 81% braid coverage
• 5 year warranty
![Coaxial Cable (75 ohm, class A): TRISET-113 PE (gel-filled) Fca [1 m]](https://www.dipol.com.pl/img/thumbnails/e1017+++++.jpg/782994682fbddbafd1bb9347813dd94e.jpg)
High-quality TV/satellite coax (A-class, 16.65 dB/100 m at 860 MHz) in PE sheath, gel-filled. For outdoor applications.
• Suitable for all types of installations - especially for terrestrial and satellite TV networks
• PE-coated outer cable
• Resistant to UV radiation
• Gel to hinder the spread of moisture inside the cable
• Shielding class: A
• Copper core: 1,13 mm
• 81% aluminium braid
• Double screen: foil/sheath
• CPR class: Fca
• Sale by the metre
• PE-coated outer cable
• Resistant to UV radiation
• Gel to hinder the spread of moisture inside the cable
• Shielding class: A
• Copper core: 1,13 mm
• 81% aluminium braid
• Double screen: foil/sheath
• CPR class: Fca
• Sale by the metre
![Coaxial Cable (75 ohm, class A): TRISET-113 PE (gel-filled) Fca 1,13/4,8/6,8 100 dB [100 m]](https://www.dipol.com.pl/img/thumbnails/e1017_100+.jpg/c61841699c220bcc8e47b237c6988d24.jpg)
TRISET-113 PE (outdoor) double-shielded RG6 type coaxial cable has the core made of copper wire with a diameter of 1.13 mm.
• Designed for all types of systems, particularly for terrestrial and satellite TV systems
• PE-coated outdoor cable
• Resistant to UV radiation
• Gel that prevents the spread of moisture inside
• Screening class: A
• Copper core: 1,13 mm
• Aluminum braid 81%
• Double shield: foil/braid
• CPR Class: Fca
• 100 meters
• PE-coated outdoor cable
• Resistant to UV radiation
• Gel that prevents the spread of moisture inside
• Screening class: A
• Copper core: 1,13 mm
• Aluminum braid 81%
• Double shield: foil/braid
• CPR Class: Fca
• 100 meters
![Coaxial Cable (75 ohm, class A): TRISET-113 PE (gel-filled) Fca 1,13/4,8/6,8 100 dB [200 m]](https://www.dipol.com.pl/img/thumbnails/e1017_200+.jpg/c9c81b6521075a285f88726b86d7ebb1.jpg)
TRISET-113 PE (outdoor) double-shielded RG6 type coaxial cable has the core made of copper wire with a diameter of 1.13 mm.
• Designed for all types of systems, particularly for terrestrial and satellite TV systems
• PE-coated outdoor cable
• Resistant to UV radiation
• Gel that prevents the spread of moisture inside
• Screening class: A
• Copper core: 1,13 mm
• Aluminum braid 81%
• Double shield: foil/braid
• CPR Class: Fca
• 200 meters
• PE-coated outdoor cable
• Resistant to UV radiation
• Gel that prevents the spread of moisture inside
• Screening class: A
• Copper core: 1,13 mm
• Aluminum braid 81%
• Double shield: foil/braid
• CPR Class: Fca
• 200 meters
![Coaxial Cable (75 ohm, class A): TRISET-113 PE (gel-filled) Fca 1,13/4,8/6,8 100 dB [500 m]](https://www.dipol.com.pl/img/thumbnails/e1017_500+.jpg/be4b32041c6ba5e4995497236dd2560c.jpg)
TRISET-113 PE (outdoor) double-shielded RG6 type coaxial cable has the core made of copper wire with a diameter of 1.13 mm.
• Designed for all types of systems, particularly for terrestrial and satellite TV systems
• PE-coated outdoor cable
• Resistant to UV radiation
• Gel that prevents the spread of moisture inside
• Screening class: A
• Copper core: 1,13 mm
• Aluminum braid 81%
• Double shield: foil/braid
• CPR Class: Fca
• 500 meters
• PE-coated outdoor cable
• Resistant to UV radiation
• Gel that prevents the spread of moisture inside
• Screening class: A
• Copper core: 1,13 mm
• Aluminum braid 81%
• Double shield: foil/braid
• CPR Class: Fca
• 500 meters
![Coaxial Cable (75 ohm, class A++): TRISET B2CA 120 dB 1.05/4.6/6.9 [1 m]](https://www.dipol.com.pl/img/thumbnails/e1020_1+.jpg/fd33a05505d1af3532b6403cb0144100.jpg)
TRISET B2CA is suitable for MATV/SMATV antenna systems in public buildings. Reaction to fire class acc. to CPR - B2ca-s1a,d1,a1.
• Compliant with class A+++ standard
• Braided 82% tinned copper
• 10 dB higher interference suppression compared to class A+
• Tin-plated copper braid resistant to oxidation
• Copper core 1.05 mm
• Low attenuation
• High screening efficiency
• 82% braid coverage
• 10-year warranty
• LSOH-coated cable
• CPR-compliant reaction to fire class - B2ca-s1a,d1,a1
• Braided 82% tinned copper
• 10 dB higher interference suppression compared to class A+
• Tin-plated copper braid resistant to oxidation
• Copper core 1.05 mm
• Low attenuation
• High screening efficiency
• 82% braid coverage
• 10-year warranty
• LSOH-coated cable
• CPR-compliant reaction to fire class - B2ca-s1a,d1,a1
![TRISET B2CA LSZH 75 ohm coaxial cable class A++ 1.05/4.6/6.9 120 dB [500 m].](https://www.dipol.com.pl/img/thumbnails/e1020_500+.jpg/783223e5fce8cf9a0a929918207856a6.jpg)
TRISET B2CA is suitable for MATV/SMATV antenna systems in public buildings. Reaction to fire class acc. to CPR - B2ca-s1a,d1,a1.
• Complies with Class A++ standard
• Braid coverage 82% - tinned copper
• Interference attenuation 10 dB higher than Class A+
• Copper tinned braid resistant to oxidation
• Complies with requirements of MTBiGM regulation
• Copper core 1,05 mm
• Low attenuation
• High shielding effectiveness
• 82% braid coverage
• 10 year warranty
• SoH coated cable
• Fire response class in accordance with CPR - B2ca-s1a,d1,a1
• Braid coverage 82% - tinned copper
• Interference attenuation 10 dB higher than Class A+
• Copper tinned braid resistant to oxidation
• Complies with requirements of MTBiGM regulation
• Copper core 1,05 mm
• Low attenuation
• High shielding effectiveness
• 82% braid coverage
• 10 year warranty
• SoH coated cable
• Fire response class in accordance with CPR - B2ca-s1a,d1,a1
![Coaxial Cable (75 ohm): Triset-11 PE 1.63/7.2/10.2, 100 dB (Fca, class A, gel-filled) [100 m]](https://www.dipol.com.pl/img/thumbnails/e1025_100+.jpg/5529721acf4446b7459fa06d9274e37c.jpg)
TRISET-11 PE (outdoor) double-shielded coaxial cable type RG11 with the internal conductor made of copper wire with a diameter 1.65 mm.
• Bus cable
• PE sheath outer cable
• Resistant to UV radiation
• Gel to impede the spread of moisture inside the cable
• Shielding class: A
• Copper core: 1.63 mm
• 86% aluminium braid
• Double screen: foil/sheath
• CPR class: Fca
• 100 metres
• PE sheath outer cable
• Resistant to UV radiation
• Gel to impede the spread of moisture inside the cable
• Shielding class: A
• Copper core: 1.63 mm
• 86% aluminium braid
• Double screen: foil/sheath
• CPR class: Fca
• 100 metres
![Coaxial Cable (75 ohm): Triset-11 PE 1.65/7.2/10, 100 dB (Fca, class A, gel-filled) [300 m]](https://www.dipol.com.pl/img/thumbnails/e1025_300+.jpg/88c4672880815cdc20e35a3da5c0543a.jpg)
TRISET-11 PE (outdoor) double-shielded coaxial cable type RG11 with the internal conductor made of copper wire with a diameter 1.65 mm.
• Bus cable
• PE sheath outer cable
• Resistant to UV radiation
• Gel to impede the spread of moisture inside the cable
• Shielding class: A
• Copper core: 1.63 mm
• 86% aluminium braid
• Double screen: foil/sheath
• CPR class: Fca
• 300 metres
• PE sheath outer cable
• Resistant to UV radiation
• Gel to impede the spread of moisture inside the cable
• Shielding class: A
• Copper core: 1.63 mm
• 86% aluminium braid
• Double screen: foil/sheath
• CPR class: Fca
• 300 metres
![Coaxial Cable (75 ohm): TRISET-11 HF 1.65/7.2/10 [200 m] (class A+, halogen-free)](https://www.dipol.com.pl/img/thumbnails/e1027_200+.jpg/94ffd0895050e944df71237466f764eb.jpg)
RG-11/TRISET-11 HF (halogen-free insulation) designed for the construction of RTV/SAT installations. It does not spread flame, smoke emission is very low and emitted gases are not corrosive.
• Bus cable
• 100% copper core 1.63 mm
• Halogen-free HF coating - does not emit toxic substances during combustion
• Designed for public buildings
• UV resistant
• Gel that hinders the spread of moisture inside the cable
• Shielding class: A
• 86% aluminium braid
• Double screen: foil/sheath.
• CPR class: Cca
• 200 metres
• 100% copper core 1.63 mm
• Halogen-free HF coating - does not emit toxic substances during combustion
• Designed for public buildings
• UV resistant
• Gel that hinders the spread of moisture inside the cable
• Shielding class: A
• 86% aluminium braid
• Double screen: foil/sheath.
• CPR class: Cca
• 200 metres
![Coaxial Cable (75 ohm, class A): TRISET-11 Cca LSZH 1.63/7.2/10.2 100 dB [300 m]](https://www.dipol.com.pl/img/thumbnails/e1027_300+.jpg/93c52370aa00b0dab11bf791e03341b8.jpg)
TRISET-11 HF (halogen-free insulation) dedicated to SMATV systems. It does not spread flame, smoke emission is very low and the released gases are not corrosive.
• Bus cable
• 100% copper core 1.63 mm
• Halogen-free HF coating - does not emit toxic substances during combustion
• Designed for public buildings
• UV resistant
• Gel that hinders the spread of moisture inside the cable
• Shielding class: A
• 86% aluminium braid
• Double screen: foil/sheath
• CPR class: Cca
• 300 metres
• 100% copper core 1.63 mm
• Halogen-free HF coating - does not emit toxic substances during combustion
• Designed for public buildings
• UV resistant
• Gel that hinders the spread of moisture inside the cable
• Shielding class: A
• 86% aluminium braid
• Double screen: foil/sheath
• CPR class: Cca
• 300 metres
End-of-line RF outlet from Satel. The GAR-BG-DK outlet (flush wall plate) is dedicated for star-shaped installations with taps.
• Flush-mounted RTV socket
• Casing made of high quality plastic
• Colour: white
• Possibility to mount the socket on a double or triple frame
• Casing made of high quality plastic
• Colour: white
• Possibility to mount the socket on a double or triple frame
The GAR-2F-BG-DK flush-mounted socket outlet is recommended for installation in RTV systems.
• Flush-mounted RTV socket
• Casing made of high quality plastic
• Colour: white
• Possibility to mount the socket on a double or triple frame
• Casing made of high quality plastic
• Colour: white
• Possibility to mount the socket on a double or triple frame
The GAR-TVP8/RS5 flush-mounted socket outlet is recommended for installation in RTV systems.
• Flush-mounted RTV socket
• Casing made of high quality plastic
• Colour: white
• Possibility to mount the socket on a double or triple frame
• Casing made of high quality plastic
• Colour: white
• Possibility to mount the socket on a double or triple frame
• Category 5e/Class D
• LSA type slot connectors
• Tool mountable
• Colour coding according to 568A and 568B
• White colour
• LSA type slot connectors
• Tool mountable
• Colour coding according to 568A and 568B
• White colour
GMH-1NT single socket equipped with an HDMI connector meeting standard 1.4.
• Surface-mounted HDMI socket
• Housing made of high quality plastic
• Colour: white
• HDMI 1.4 standard
• Possibility to mount the socket on a double or triple frame
• Housing made of high quality plastic
• Colour: white
• HDMI 1.4 standard
• Possibility to mount the socket on a double or triple frame
The GAR-BG-DK N/T surface-mounted blind/terminal socket outlet is recommended for installation in RTV systems.
• Surface-mounted RTV socket
• Casing made of high quality plastic
• Colour: white
• Possibility to mount the socket on a double or triple frame
• Casing made of high quality plastic
• Colour: white
• Possibility to mount the socket on a double or triple frame
The GAR-TVP8/RS5 N/T surface-mounted blind/terminal socket is recommended for installation in RTV systems.
• Surface-mounted RTV socket
• Casing made of high quality plastic
• Colour: white
• Possibility to mount the socket on a double or triple frame
• Casing made of high quality plastic
• Colour: white
• Possibility to mount the socket on a double or triple frame
GIS-F1-1M surface-mounted socket for individual television installations.
• Socket for terminating a television installation
• Surface mounted
• F-type connector
• Possibility of connecting any TV signal
• Easy and quick installation
• Surface mounted
• F-type connector
• Possibility of connecting any TV signal
• Easy and quick installation
GIS-F1-1/N N/T surface-mounted socket for individual television installations.
• Socket for terminating a television installation
• Surface mounted
• F-type connector
• Possibility of connecting any TV signal
• Easy and quick installation
• Surface mounted
• F-type connector
• Possibility of connecting any TV signal
• Easy and quick installation
GIS-F1-1/P P/T flush-mounted socket for individual television installations.
• A socket at the end of the television installation
• Recessed installation
• Two F-type connectors
• Possibility of connecting any TV signal
• Easy and quick assembly
• Recessed installation
• Two F-type connectors
• Possibility of connecting any TV signal
• Easy and quick assembly
GIS-F1-2M surface-mounted socket for individual television installations.
• Socket for terminating a television installation
• Surface mounted
• Two F-type connectors
• Possibility of connecting any TV signal
• Easy and quick installation
• Surface mounted
• Two F-type connectors
• Possibility of connecting any TV signal
• Easy and quick installation
GIS-F1-2/N double-socket, surface-mounted for individual television installations.
• End-of-line TV outlet
• Surface-mounted
• Two F connectors
• Compatible with SAT and terrestrial TV signals
• Easy to mount
• Surface-mounted
• Two F connectors
• Compatible with SAT and terrestrial TV signals
• Easy to mount
GIS-F1-2/P double flush-mounted socket for individual television installations.
• Socket for terminating a television installation
• Flush mounting
• Two F-type connectors
• Possibility of connecting any TV signal
• Easy and quick installation
• Flush mounting
• Two F-type connectors
• Possibility of connecting any TV signal
• Easy and quick installation
GAR-BG-DK-SAT N/T surface-mounted terminal outlet for individual and community RTV/SAT installations.
• The outlet is designed for multiswitch installations
• Surface mounted
• Terminal type
• High screening efficiency
• Easy and quick installation
• Surface mounted
• Terminal type
• High screening efficiency
• Easy and quick installation
GAR-BG-DK-SAT R/T flush-mounted terminal outlet for individual and community RTV/SAT installations.
• The outlet is designed for multiswitch installations
• Flush mounting
• Type: terminal
• High screening efficiency
• Easy and quick installation
• Flush mounting
• Type: terminal
• High screening efficiency
• Easy and quick installation
GAR-3F-BG-DK SAT P/T flush-mounted socket outlet designed for individual and community RTV/SAT installations.
• The outlet is designed for multiswitch installations
• Flush mounting
• Type: terminal
• High screening efficiency
• Easy and quick installation
• Flush mounting
• Type: terminal
• High screening efficiency
• Easy and quick installation
GAR-3F-BG-DK SAT N/T surface-mounted terminal outlet designed for individual and community RTV/SAT installations.
• Socket designed for multiswitch systems
• 1 type of connector (F-socket)
• Attenuation in SAT path 2 dB
• High screening efficiency
• Easy and quick installation
• 1 type of connector (F-socket)
• Attenuation in SAT path 2 dB
• High screening efficiency
• Easy and quick installation
Optical outlet GMO-2PT R62202 equipped with two SC/PC sockets/adapters.
• Socket for terminating a fibre optic installation
• Flush mounting
• Two SC/PC connectors
• Easy and quick installation
• Flush mounting
• Two SC/PC connectors
• Easy and quick installation
GAP-10-BG-DK RTV pass-through socket outlet with 10 dB connection attenuation for RTV installations.
• Socket for terminating a television installation
• Surface mounted
• Type: pass-through
• Attenuation of the connection 10 dB
• Easy and quick installation
• Surface mounted
• Type: pass-through
• Attenuation of the connection 10 dB
• Easy and quick installation
GAP-14-BG-DK RTV pass-through socket outlet with 14 dB connection attenuation for RTV installations.
• Socket for terminating a television installation
• Surface mounted
• Type: pass-through
• Attenuation of the connection 14 dB
• Easy and quick installation
• Surface mounted
• Type: pass-through
• Attenuation of the connection 14 dB
• Easy and quick installation
GAP-16-BG-DK RTV pass-through socket outlet with 16 dB connection attenuation for RTV installations.
• Socket for terminating a television installation
• Surface mounted
• Type: pass-through
• Attenuation of the connection 16 dB
• Easy and quick installation
• Surface mounted
• Type: pass-through
• Attenuation of the connection 16 dB
• Easy and quick installation
Frame for integrating two Satel outlets.
• The frame is made of ABS plastic
• Mounting of two Satel sockets
• Mounting of two Satel sockets
Frame integrating three Satel sockets.
• The frame is made of ABS plastic
• Mounting three Satel sockets
• Mounting three Satel sockets
RTV-SAT+RJ45/11 end socket for integrating RTV/SAT systems with telephone and LAN. The RJ-45 port can be used for Ethernet, Fast Ethernet and Gigabit Ethernet.
• Universal multimedia socket
• Inputs: radio, terrestrial TV, satellite TV, Internet
• Flush-mounted
• Applicable for Ethernet, Fast Ethernet and Gigabit Ethernet
• Inputs: radio, terrestrial TV, satellite TV, Internet
• Flush-mounted
• Applicable for Ethernet, Fast Ethernet and Gigabit Ethernet
The RTV-SAT terminal socket (surface/plaster) is used in multiswitch installations.
• Outlet used in multiswitch installations
• Filtering of signals into 3 paths: radio, DVB-T/T2, TV-SAT
• Surface or flush mounting
• Easy to install
• Maximum attenuation 3.5 dB
• Filtering of signals into 3 paths: radio, DVB-T/T2, TV-SAT
• Surface or flush mounting
• Easy to install
• Maximum attenuation 3.5 dB
The RTV-SAT through socket outlet (surface/plaster) is used in RTV/SAT installations.
• Filtering of signals on 3 tracks: radio, DVB-T/T2, TV-SAT
• Surface or flush-mounted installation
• Easy to install
• Feed-through attenuation 3.5 dB
• Connection attenuation max. 14 dB
• Surface or flush-mounted installation
• Easy to install
• Feed-through attenuation 3.5 dB
• Connection attenuation max. 14 dB
The RTV terminal socket (surface/plaster) is used in RTV installations.
• Affordable high quality TV and FM outlet
• For flush or surface mounting
• Attenuation in TV path (UHF): 1.2 dB
• Attenuation in FM path 1.8 dB
• For flush or surface mounting
• Attenuation in TV path (UHF): 1.2 dB
• Attenuation in FM path 1.8 dB
The Signal RTV-SAT+PVR terminal outlet is used in RTV/SAT installations to provide signals to twin PVR receivers.
• For dual head PVR tuners with recording
• Outputs: radio, TV, 2x SAT
• Surface or flush-mounted installation
• Attenuation in the RTV band 3.5 dB
• Ambient attenuation at SAT1 output 3.5 dB, at SAT2 output 3 dB
• Outputs: radio, TV, 2x SAT
• Surface or flush-mounted installation
• Attenuation in the RTV band 3.5 dB
• Ambient attenuation at SAT1 output 3.5 dB, at SAT2 output 3 dB
Surface-mounted frame for Signal sockets.
• Surface-mounted frame
• Designed for Signal sockets
• White colour
• Designed for Signal sockets
• White colour
DC015T antenna diplexer that sums signals from three antennas – signals from FM+VHFI/II band (47-108 MHz), VHFIII (174-230 MHz) and UHF band (470-694 MHz).
• The diplexer enables summing of FM+VHFI/II band (47-108 MHz), VHFIII(174-230 MHz) and UHF band (470-694 MHz) signals
• It is mounted on the antenna tower, near the antenna set
• Die-cast housing inside a compact plastic case
• It is mounted on the antenna tower, near the antenna set
• Die-cast housing inside a compact plastic case
The ZWR-210DC crossover (2 inputs) is used as a summing element for FM/VHF and UHF band signals.
• Inputs: FM/VHF, UHF
• Attenuation: 1 dB
• Separately switchable current transitions in VHF and UHF paths (DC 12 V/100 mA)
• Shielded housing
• Mounting on mast in splash-proof housing by means of a clamp
• Attenuation: 1 dB
• Separately switchable current transitions in VHF and UHF paths (DC 12 V/100 mA)
• Shielded housing
• Mounting on mast in splash-proof housing by means of a clamp
The ZA-104Ms diplexer (3 inputs) is used as a combining element for FM, VHF and UHF band signals (max. DC 24 V/0.2 A).
• Inputs: FM, VHF, UHF
• Attenuation: 1 dB
• Current pass-through in UHF path (max. DC 24 V/ 200mA)
• Shielded housing
• Mounting on mast with cable tie
• F type connectors
• Attenuation: 1 dB
• Current pass-through in UHF path (max. DC 24 V/ 200mA)
• Shielded housing
• Mounting on mast with cable tie
• F type connectors
The ZA-204Ms crossover (3 inputs) is used as a combining element for FM, VHF and UHF band signals (auto DC 12 V/0.6 A).
• Inputs: FM, VHF, UHF
• Attenuation: 1 dB
• Auto DC circuit on all inputs (12 V/100 mA)
• Shielded housing
• Mounting on mast with cable tie
• F-type connectors
• Attenuation: 1 dB
• Auto DC circuit on all inputs (12 V/100 mA)
• Shielded housing
• Mounting on mast with cable tie
• F-type connectors
The ZA-106AMs crossover (2 inputs) is used as a summing element for FM and VHF/UHF band signals.
• Inputs: FM, VHF/UHF
• Attenuation: 1 dB
• Current pass-through in VHF/UHF path (max. DC 24 V/250 mA)
• Shielded housing
• Mounting on mast by means of clamp
• F-type connectors
• Attenuation: 1 dB
• Current pass-through in VHF/UHF path (max. DC 24 V/250 mA)
• Shielded housing
• Mounting on mast by means of clamp
• F-type connectors
The ZA-112Ms antenna diplexer (3 inputs) is used as a combining element for VHF, UHF1 (max. 24 VDC/0,2 A), UHF2.
• Inputs: VHF, UHF1, UHF2
• Attenuation: 1 dB
• Current pass in UHF1 path (max. DC 24 V/200 mA)
• Shielded housing
• Mast mounting with cable tie
• F type connectors
• Attenuation: 1 dB
• Current pass in UHF1 path (max. DC 24 V/200 mA)
• Shielded housing
• Mast mounting with cable tie
• F type connectors
The ZA-106Ms diplexer (2 inputs) is used as a combining element for VHF and UHF band signals (max. DC 24 V/0.25 A).
• Inputs: VHF, UHF
• Attenuation: 1 dB
• Current pass-through in UHF path (max. DC 24 V/250 mA)
• Shielded housing
• Mounting on mast by means of a clamp
• F type connectors
• Attenuation: 1 dB
• Current pass-through in UHF path (max. DC 24 V/250 mA)
• Shielded housing
• Mounting on mast by means of a clamp
• F type connectors
The ZA-206Ms crossover (2 inputs) is used as a combining element for VHF (auto. DC 12 V/0.6 A) and UHF (auto. DC 12 V/0.6 A) band signals.
• Inputs: VHF, UHF
• Attenuation: 1 dB
• Auto DC circuit on all inputs (12 V/60 mA)
• Shielded housing
• Mounting on mast with cable tie
• F-type connectors
• Attenuation: 1 dB
• Auto DC circuit on all inputs (12 V/60 mA)
• Shielded housing
• Mounting on mast with cable tie
• F-type connectors
The ZA-F10 in-duct diplexer is used as a combining element for FM/VHF (5-230 MHz) and UHF (470-790 MHz) antenna signals.
• Mounted directly in VHF antenna box
• 12 VDC pass-through between the output and UHF antenna connector (max. 100 mA)
• Insertion loss: 1.5 dB
• Attenuates LTE signals
• 12 VDC pass-through between the output and UHF antenna connector (max. 100 mA)
• Insertion loss: 1.5 dB
• Attenuates LTE signals
1.5 m TV-Video cable
• Length 1.5 m
• IEC plug - IEC socket
• IEC plug - IEC socket
1.5 m cable antenna plug - antenna socket
• Length 1.5 m
• IEC plug - IEC socket
• Angle connectors
• IEC plug - IEC socket
• Angle connectors
Antenna plug - antenna socket cable, 3 m long.
• Length 3 m
• IEC plug - IEC socket
• Angle connectors
• IEC plug - IEC socket
• Angle connectors
![Cable connector F male – F male compression connectors, Master [1.5 m]](https://www.dipol.com.pl/img/thumbnails/e0620+.jpg/1dfb43d329df1f1e42152745779c7a89.jpg)
Cable F-plug - F-plug compression connectors master, length 1.5 m
• Length 1.5 m
• F-plug - F-plug
• F-plug - F-plug
![Cablle connector F male – F male, compression-type Master connectors [3 m]](https://www.dipol.com.pl/img/thumbnails/e0622+.jpg/b25cc09d08d32df028668aaa827007f9.jpg)
Cable F-plug - F-plug compression connectors Master, length 3 m.
• Length 3 m
• F-plug - F-plug
• F-plug - F-plug
The product is useful when the only possible place to run a cable into the room is through a window.
• No need to drill into the wall or window frame
• Low signal attenuation
• Easy connection - 2 F-type connectors
• Small dimensions
• With adhesive tape underneath
• Low signal attenuation
• Easy connection - 2 F-type connectors
• Small dimensions
• With adhesive tape underneath
A high-quality window transition is useful when it is not possible to drill into the wall or window frame. Tape thickness not exceeding 0.2 mm.
• High quality
• Tape thickness 0.2 mm
• Resistant to multiple bending
• Plugs placed at the bottom of each F-plug
• Tape thickness 0.2 mm
• Resistant to multiple bending
• Plugs placed at the bottom of each F-plug
Surge protection protects the system from the effects of overvoltages and voltages induced in conductors due to lightning.
• Lightning protection of TV and SAT TV devices
• Pass band: 5-2400 MHz
• Insertion loss not higher than 1.5 dB
• Maximum current (8/20 µs): 8 kA
• Screening efficiency: A class
• Pass band: 5-2400 MHz
• Insertion loss not higher than 1.5 dB
• Maximum current (8/20 µs): 8 kA
• Screening efficiency: A class
A galvanic isolator is an element used in television installations to neutralise the negative effects of potential differences in the various branches of the network.
• Solves problems caused by potential differences between network segments, network and receivers etc.
• Operating band: 2400 MHz
• Low loss (<1.5 dB up to 1000 MHz)
• Full galvanic isolation (both of signal path and screen
• Breakdown voltage 3000 V for 1 minute test with current leak < 0.7 mA
• Operating band: 2400 MHz
• Low loss (<1.5 dB up to 1000 MHz)
• Full galvanic isolation (both of signal path and screen
• Breakdown voltage 3000 V for 1 minute test with current leak < 0.7 mA
Signal surge protection box has been designed to provide comprehensive protection of SMATV systems, especially multiswitch installations.
• Number of protectors 12
• Operating band 5-2400 MHz
• Maximum current for 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
• Operating band 5-2400 MHz
• Maximum current for 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
ZPZ-12 Signal has been designed to provide comprehensive protection of SMATV systems, in particular multiswitch installations.
• Interior/exterior box made of PA 11 aluminium alloy, powder-coated in RAL 7035
• The cable holes are placed through the box
• Number of interconnectors 12
• Operating bandwidth 5-2400 MHz
• Maximum current at 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
• The cable holes are placed through the box
• Number of interconnectors 12
• Operating bandwidth 5-2400 MHz
• Maximum current at 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
ZMZ-12 Signal is designed to provide comprehensive protection of SMATV systems, in particular multiswitch installations.
• Interior / exterior box made of PA 11 aluminium alloy, powder-coated in RAL 7035
• Cable entry points are located at the bottom of the box
• Number of protectors 12
• Operating band 5-2400 MHz
• Maximum current at 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
• Cable entry points are located at the bottom of the box
• Number of protectors 12
• Operating band 5-2400 MHz
• Maximum current at 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
ZMZ-13 Signal is designed to provide comprehensive protection of SMATV systems, in particular multiswitch installations.
• Interior / exterior box made of PA 11 aluminium alloy, powder-coated in RAL 7035
• Cable openings are at the bottom of the box
• Number of protectors 13
• Operating band 5-2400 MHz
• Maximum current at 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
• Cable openings are at the bottom of the box
• Number of protectors 13
• Operating band 5-2400 MHz
• Maximum current at 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
The LTE700 filter with 24 V Signal DC pass-through is used in RTV/SAT TV installations and is used to filter out unwanted signals in the 700 MHz band.
• LTE700 signal attenuation (band > 694 MHz)
• 24 V DC pass-through
• Very steep slope of attenuation characteristics at the band edge
• 24 V DC pass-through
• Very steep slope of attenuation characteristics at the band edge
The attenuator is intended to reduce RF signal level within 5-2400 MHz range in CATV antenna systems.
• Operating frequency range: 5-2400 MHz
• Attenuation: 10 dB
• DC pass-through: 30 V (max 1 A)
• Metal housing
• Connector: F plug, F socket
• Attenuation: 10 dB
• DC pass-through: 30 V (max 1 A)
• Metal housing
• Connector: F plug, F socket
Attenuator designed to reduce signal levels in CATV installations in the 5-1000 MHz band.
• Attenuation: 6 dB
• Operating band: 5-1000 MHz
• DC pass - none
• Operating band: 5-1000 MHz
• DC pass - none
Attenuator designed to reduce signal levels in CATV installations in the 5-1000 MHz band.
• Attenuation: 10 dB
• Operating band: 5-1000 MHz
• DC pass - none
• Operating band: 5-1000 MHz
• DC pass - none
Attenuator designed to reduce signal levels in CATV installations in the 5-1000 MHz band.
• Attenuation: 16 dB
• Operating bandwidth: 5-1000 MHz
• DC pass - none
• Operating bandwidth: 5-1000 MHz
• DC pass - none
Attenuator designed to reduce signal levels in CATV installations in the 5-1000 MHz band.
• Attenuation: 20 dB
• Operating band: 5-1000 MHz
• DC pass - none
• Operating band: 5-1000 MHz
• DC pass - none
The attenuator is intended to reduce RF signal level within 47-2150 MHz range in S/MATV antenna systems.
• Evaluation: 0...20 dB
• Operating band: 47-2150 MHz
• DC pass - max 24 V, 500 mA
• Operating band: 47-2150 MHz
• DC pass - max 24 V, 500 mA
The coaxial cable attenuation equalizer 4 dB EQF041 TERRA is used to compensate for differences in satellite signal attenuation through the coaxial cable in systems with Wideband LNBs.
• Attenuation equalizer for Wideband systems
• 15 m line extension
• 4 dB attenuation compensation
• 15 m line extension
• 4 dB attenuation compensation
The coaxial cable attenuation equalizer 8 dB EQF081 TERRA is used to compensate for differences in satellite signal attenuation through the coaxial cable in systems with Wideband LNBs.
• Attenuation equalizer for Wideband systems
• 30 m line extension
• 8 dB attenuation compensation
• 30 m line extension
• 8 dB attenuation compensation
The coaxial cable attenuation equalizer 12 dB EQF121 TERRA is used to compensate for differences in satellite signal attenuation through the coaxial cable in systems with Wideband LNBs.
• Attenuation equalizer for Wideband systems
• 45 m line extension
• 12 dB attenuation compensation
• 45 m line extension
• 12 dB attenuation compensation
The attenuator is intended to reduce RF signal level within 5-2400 MHz range in CATV antenna systems with the DC pass-through.
• Operating frequency range: 5-2400 MHz
• Smooth attenuation adjustment from 3 dB to 18 dB
• DC pass-through max. 500 mA
• Smooth attenuation adjustment from 3 dB to 18 dB
• DC pass-through max. 500 mA
The Signal R-2 signal splitter splits CATV signals in the 5-1000 MHz band.
• Splits DVB-T / FM signals into two paths
• Operating band: 5-1000 MHz
• F-f connectors
• Cast aluminum housing
• Operating band: 5-1000 MHz
• F-f connectors
• Cast aluminum housing
The Signal R-3 signal splitter splits CATV signals in the 5-1000 MHz band.
• DVB-T/T2 signal split into three channels
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
The Signal R-4 signal splitter allows the division of CATV signals in the 5-1000 MHz band.
• DVB-T/T2 signal splitting into four channels
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
The Signal R-6 signal splitter splits CATV signals in the 5-1000 MHz band.
• DVB-T/T2 signal splitting into six tracks
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
The Signal R-8 signal splitter splits CATV signals in the 5-1000 MHz band.
• DVB-T/T2 signal splitting into eight channels
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
The FAC-1-6 dB TV tapping unit allows the bus signal to be separated in a CATV installation in the 5-1000 MHz band.
• Operating bandwidth 5-1000 MHz
• Spur attenuation 6 dB
• F-type connectors
• Cast aluminium alloy housing
• Spur attenuation 6 dB
• F-type connectors
• Cast aluminium alloy housing
The FAC-1-10 dB TV tapping unit allows the bus signal to be separated in a CATV installation in the 5-1000 MHz band.
• Operating bandwidth 5-1000 MHz
• Spur attenuation 10 dB
• F-type connectors
• Cast aluminium alloy housing
• Spur attenuation 10 dB
• F-type connectors
• Cast aluminium alloy housing
The operating frequency range is 5-1000 MHz. The tap is equipped with F connectors and cast aluminum housing.
• Dedicated to FM and TV systems
• Die-cast enclosure
• High input/output separation
• Screening efficiency class A
• Die-cast enclosure
• High input/output separation
• Screening efficiency class A
The splitter operates from 5-1000 MHz and its performance is similar to other splitters in this class.
• Operating bandwidth 5-1000 MHz
• Spur attenuation 12 dB
• F-type connectors
• Cast aluminium alloy housing
• Spur attenuation 12 dB
• F-type connectors
• Cast aluminium alloy housing
The operating frequency range of the tap is 5-1218 MHz. The product ensures good quality and suitability for professional use.
• Die-cast casing made of aluminum alloy
• Operating frequency range: 5-1218 MHz
• Screening class: A
• Different attenuation on outputs
• Operating frequency range: 5-1218 MHz
• Screening class: A
• Different attenuation on outputs
The resistor is dedicated for mounting on unloaded outputs of taps, splitters, and amplifiers in order to terminate the line section.
• F-type connector
• Mounted on unloaded outputs of taps, splitters, multiswitches and amplifiers
• Mounted on unloaded outputs of taps, splitters, multiswitches and amplifiers
Terminating resistor with DC block, for closing unused RF inputs/outputs of SS-5xx taps and multiswitches.
• F-type connector
• DC lock
• Mounted on unloaded inputs of taps, splitters, multiswitches and amplifiers
• DC lock
• Mounted on unloaded inputs of taps, splitters, multiswitches and amplifiers
The FC37 RF/DC separator cuts off DC voltage at any point of the antenna system and passes the RF signal.
• DC voltage lock up to DC 48 V
• Metal housing
• Metal housing
The TF005 is used to filter out unwanted signals in the 700 MHz band (694 - 862 MHz frequencies) for data services (LTE).
• Rejection of LTE 700 band (> 694 MHz)
• Very steep slope, just at the band rejection limit
• DC pass (max: 24 V/100 mA) - can be used in an antenna system with an external amplifier
• Very steep slope, just at the band rejection limit
• DC pass (max: 24 V/100 mA) - can be used in an antenna system with an external amplifier
