EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
The PS-1 antenna power supply unit is used to supply DC 12 V to antenna amplifiers with a maximum current consumption of 300 mA.
• DC 12 V / max. 300 mA
• LED monitoring
• Easy connection via F-type connectors
• LED monitoring
• Easy connection via F-type connectors
The WWK Maestro is a new generation channel amplifier with 4 inputs for DVB-T2 digital terrestrial antennas.
• Maximum output level 93 dBµV
• 4 UHF+VHF inputs
• 32 digital channel filters with high selectivity and wide AGC range
• Automatic detection of appropriate signals
• 5G protected technology
• Compact dimensions and mast housing
• Remote power supply
• Self-installation for everyone
• 4 UHF+VHF inputs
• 32 digital channel filters with high selectivity and wide AGC range
• Automatic detection of appropriate signals
• 5G protected technology
• Compact dimensions and mast housing
• Remote power supply
• Self-installation for everyone
The active RTA-120 splitter is a high-quality element of the antenna installation, designed to split the signal between two television receivers.
• Splitting signal into 2 receivers without compromising picture and sound quality
• Operating frequency range: 47-862 MHz - stable operation over a wide frequency band
• Gain control
• High output separation to minimise interference between connected devices
• Low signal attenuation - stable reception of terrestrial DVB-T2 and cable TV
• Power supply via coaxial cable from the output side (OUT)
• Possibility to transfer power voltage from output (OUT) to input (IN)
• Robust, compact metal casing - easy installation even in limited space
• Operating frequency range: 47-862 MHz - stable operation over a wide frequency band
• Gain control
• High output separation to minimise interference between connected devices
• Low signal attenuation - stable reception of terrestrial DVB-T2 and cable TV
• Power supply via coaxial cable from the output side (OUT)
• Possibility to transfer power voltage from output (OUT) to input (IN)
• Robust, compact metal casing - easy installation even in limited space
The active RTA-140 splitter is a high-quality element of the antenna installation, designed to divide the signal into four television receivers.
• Splitting signal into 4 receivers without compromising picture and sound quality
• Operating frequency range: 47-862 MHz - stable operation over a wide frequency band
• Gain control
• High output separation to minimise interference between connected devices
• Low signal attenuation - stable reception of terrestrial DVB-T2 and cable TV
• Power supply via coaxial cable from the output side (OUT)
• Possibility to transfer power voltage from output (OUT) to input (IN)
• Robust, compact metal casing - easy installation even in limited space
• Operating frequency range: 47-862 MHz - stable operation over a wide frequency band
• Gain control
• High output separation to minimise interference between connected devices
• Low signal attenuation - stable reception of terrestrial DVB-T2 and cable TV
• Power supply via coaxial cable from the output side (OUT)
• Possibility to transfer power voltage from output (OUT) to input (IN)
• Robust, compact metal casing - easy installation even in limited space
The WWK ALPHA 2 is an advanced digital channel amplifier designed for professional SMATV antenna installations and extensive individual installations.
• Digital selective signal processing DVB-T2 (DSP)
• Channel conversion within the VHF and UHF bands
• Individual level control of each MUX and global output control
• DAB wideband mode (174-230 MHz) without channel programming
• Advanced LTE 700/LTE 800 filtering, SAW filter active in LTE 700 mode
• SMART SCAN function - automatic search for DVB-T2 signals
• Intelligent power control of preamplifiers (Auto Preamp Control)
• High immunity to overdrive and interference (IMD3 to 122 dBµV)
• Class A shielding according to EN 50083-2
• Compact metal casing
• Channel conversion within the VHF and UHF bands
• Individual level control of each MUX and global output control
• DAB wideband mode (174-230 MHz) without channel programming
• Advanced LTE 700/LTE 800 filtering, SAW filter active in LTE 700 mode
• SMART SCAN function - automatic search for DVB-T2 signals
• Intelligent power control of preamplifiers (Auto Preamp Control)
• High immunity to overdrive and interference (IMD3 to 122 dBµV)
• Class A shielding according to EN 50083-2
• Compact metal casing
The power supply is designed to supply DC 12 V to terrestrial TV antenna amplifiers and preamplifiers with a current consumption of up to 300 mA.
• Type: pulsed
• Input voltage: AC 230 V 50 Hz
• Output voltage: DC 12 V
• Max. output current: 300 mA
• TV output: IEC plug
• Cable connection: F-type connector
• Input voltage: AC 230 V 50 Hz
• Output voltage: DC 12 V
• Max. output current: 300 mA
• TV output: IEC plug
• Cable connection: F-type connector
RF amplifier HS-018T for small to medium-sized radio and television systems. Separate controls for FM/DAB+/VHF and UHF bands.
• Equipped with 1 input and 2 RF outputs
• Maximum gain 26 dB
• Separate adjustment for FM/DAB+/VHF bands in the range 0...15 dB and UHF in the range 0...12 dB
• Built-in cable characteristic pre-correction - achieving higher levels at higher frequencies
• Built-in LTE700 filter - reduces interference from 5G networks
• Signal amplification - improves the quality of terrestrial TV reception
• Application in home installations and small RTV networks
• Maximum gain 26 dB
• Separate adjustment for FM/DAB+/VHF bands in the range 0...15 dB and UHF in the range 0...12 dB
• Built-in cable characteristic pre-correction - achieving higher levels at higher frequencies
• Built-in LTE700 filter - reduces interference from 5G networks
• Signal amplification - improves the quality of terrestrial TV reception
• Application in home installations and small RTV networks
The PR-310 amplifier is used to amplify RTV/SAT signals in the 5 - 2400 MHz band.
• Gain 10 dB
• It amplifies all bands: FM/DAB+, DVB-T2, DVB-S/S2
• Frequency range 5-2400 MHz
• DC pass-through 13 V/18 V 500 mA
• It amplifies all bands: FM/DAB+, DVB-T2, DVB-S/S2
• Frequency range 5-2400 MHz
• DC pass-through 13 V/18 V 500 mA
ALCAD's CAD-824 programmable, multi-band, channel amplifier is designed for community antenna installations for reception of DVB-T2 digital terrestrial television.
• Amplifier dedicated for SMATV antenna systems
• 4 VHF+UHF inputs, 1 FM input
• Auto-configuration function
• DC feeding for preamplifiers 12 - 24 V
• High selectivity with 32 filters
• High gain with AGC
• Converter function
• Excellent output signal quality
• Easy installation and configuration
• 4 VHF+UHF inputs, 1 FM input
• Auto-configuration function
• DC feeding for preamplifiers 12 - 24 V
• High selectivity with 32 filters
• High gain with AGC
• Converter function
• Excellent output signal quality
• Easy installation and configuration
The DTT MCA101T TERRA masthead correction amplifier is dedicated to work with OTF30x transmitters
• Dedicated to work with TERRA's OTF30x optical transmitters
• Frequency converter
• Automatic Gain Control (AGC) circuit to ensure signal stability
• Built-in LTE700 filter
• Remote DC power supply
• Capable of outdoor mounting
• Frequency converter
• Automatic Gain Control (AGC) circuit to ensure signal stability
• Built-in LTE700 filter
• Remote DC power supply
• Capable of outdoor mounting
