EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
HS005L building amplifier for the VHF (88-230 MHz)/UHF (470-790 MHz) bands. The maximum gain in the VHF band is 30 dB, in the UHF band it is 34 dB.
• Universal Terra TV amplifier for use in buildings
• Integrated 4G LTE filter - attenuation of signals above 791 MHz
• Split-band circuitry with separate gain adjustments in VHF (30 dB) and UHF (34 dB) ranges
• Switchable (ON/OFF) 12 VDC / 60 mA supply for a preamplifier
(through the RF input)
• Die-cast housing providing high screening efficiency by preventing the penetration of interfering signals to the unit
• Test output (-30 dB)
• 4-year warranty
• Integrated 4G LTE filter - attenuation of signals above 791 MHz
• Split-band circuitry with separate gain adjustments in VHF (30 dB) and UHF (34 dB) ranges
• Switchable (ON/OFF) 12 VDC / 60 mA supply for a preamplifier
(through the RF input)
• Die-cast housing providing high screening efficiency by preventing the penetration of interfering signals to the unit
• Test output (-30 dB)
• 4-year warranty
The AS038R65 amplifier (1-in/4-out) is designed for cable TV installations providing services also in the return channel band (Internet).
• For use in CATV and DVB-T antenna systems
• Return channel connectivity (Internet)
• Passive return channel is compatible with any CATV network
• Maximum output level of 100 dBμV
• Built-in 4-way splitter
• Max gain of 23 dB, with adjustment range of 16 dB
• Low power consumption (below 3 W)
• Return channel connectivity (Internet)
• Passive return channel is compatible with any CATV network
• Maximum output level of 100 dBμV
• Built-in 4-way splitter
• Max gain of 23 dB, with adjustment range of 16 dB
• Low power consumption (below 3 W)
The MA044M building amplifier is designed for community antenna installations. The amplification in VHFI/FM, VHFIII bands is 30 dB, in the UHF band it is 34 dB.
• Built-in cable pre-correction
• 30 dB gain on FM, BIII and 34 dB gain for each UHF input
On/Off switch enabling sending 12 V voltage and 60 mA current to the antenna preamplifier
• The cast housing ensures high shielding effectiveness, preventing interference signals from penetrating inside the device
• 30 dB gain on FM, BIII and 34 dB gain for each UHF input
On/Off switch enabling sending 12 V voltage and 60 mA current to the antenna preamplifier
• The cast housing ensures high shielding effectiveness, preventing interference signals from penetrating inside the device
The MA045M building amplifier is designed for community antenna installations. The amplification in VHFI/FM, VHFIII bands is 30 dB, in 2xUHF band it is 34 dB.
• Multi-input building amplifier
• Built-in cable pre-correction
• 30/34 dB gain
• Maximum output level 115 dBμV
• Capable of supplying DC 12 V to the antenna preamplifier
• The die-cast housing for effective shielding
• Built-in cable pre-correction
• 30/34 dB gain
• Maximum output level 115 dBμV
• Capable of supplying DC 12 V to the antenna preamplifier
• The die-cast housing for effective shielding
The MA050L building amplifier is designed for small and medium-sized RTV installations. The amplification in the FM/VHFIII bands is 30 dB, in the UHF band it is 34 dB.
• Built-in cable pre-correction
• Integrated LTE attenuation filter
• 30 dB gain in FM, BIII band and 34 dB gain in UHF band
• On/Off switch allowing 12 volts and 60 mA current to be sent to the antenna preamplifier
• Open housing provides high efficiency shielding to prevent interfering signals from penetrating inside the unit
• Integrated LTE attenuation filter
• 30 dB gain in FM, BIII band and 34 dB gain in UHF band
• On/Off switch allowing 12 volts and 60 mA current to be sent to the antenna preamplifier
• Open housing provides high efficiency shielding to prevent interfering signals from penetrating inside the unit
House amplifier used in SMATV and cable systems with return channel.
• Building amplifier
• Dedicated to cable installations
• Frequency range: 5...65 MHz/87...862 MHz
• Push-pull output stage, made of gallium arsenide GaAs
• Characteristics corrector on input of feedforward and return channel
• Outside housing
• Amplification of 40 dB (forward channel) and -5/27 dB (return channel)
• Dedicated to cable installations
• Frequency range: 5...65 MHz/87...862 MHz
• Push-pull output stage, made of gallium arsenide GaAs
• Characteristics corrector on input of feedforward and return channel
• Outside housing
• Amplification of 40 dB (forward channel) and -5/27 dB (return channel)
House amplifier used in SMATV and cable systems with return channel.
• House amplifier
• Dedicated to cable systems
• Frequency range: 5...65 MHz/87...1218 MHz
• Push-pull output stage, made of gallium arsenide GaAs
• Waveform correction filter at input of the transmission and return channel
• Die-cast housing
• Gain of 40 dB (transmission channel) and -5/27 dB (return channel)
• Dedicated to cable systems
• Frequency range: 5...65 MHz/87...1218 MHz
• Push-pull output stage, made of gallium arsenide GaAs
• Waveform correction filter at input of the transmission and return channel
• Die-cast housing
• Gain of 40 dB (transmission channel) and -5/27 dB (return channel)
HA024 building amplifier for use in small and medium-sized RTV installations. Built-in gain switch 18...20/27...30 dB.
• Ideal for amplification of DVB-T and cable TV signals
• Maximum gain 30 dB
• Attenuation correction - recommended for long antenna cable lengths
• Double gain control
• Maximum output signal level 97 dBμV
• Maximum gain 30 dB
• Attenuation correction - recommended for long antenna cable lengths
• Double gain control
• Maximum output signal level 97 dBμV
HA-126 building amplifier (1 in/1 out) for use in community antenna installations to compensate for attenuation of RTV signals. Gain 34 dB.
• Broadband amplifier
• Maximum gain 34 dB
• One of the most popular amplifiers on the market
• Maximum output signal level 117 dBμV
• Gain control within 20 dB
• Cable attenuation correction in the range of 18 dB
• Maximum gain 34 dB
• One of the most popular amplifiers on the market
• Maximum output signal level 117 dBμV
• Gain control within 20 dB
• Cable attenuation correction in the range of 18 dB
HA-131L amplifier with LTE filter for large RTV installations. It is characterised by a high gain of 36 dB.
• High power amplifier designed for TV installations
• 36 dB amplification
• Maximum output level 122 dBμV
• Built-in LTE filter - suppression of unwanted signals above 791 MHz
• Smooth gain adjustment
• Smooth slope adjustment for gain characteristics
• Open housing
• 36 dB amplification
• Maximum output level 122 dBμV
• Built-in LTE filter - suppression of unwanted signals above 791 MHz
• Smooth gain adjustment
• Smooth slope adjustment for gain characteristics
• Open housing
