EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
The active RTA-120 splitter is a high-quality element of the antenna installation, designed to split the signal between two television receivers.
• Splitting signal into 2 receivers without compromising picture and sound quality
• Operating frequency range: 47-862 MHz - stable operation over a wide frequency band
• Gain control
• High output separation to minimise interference between connected devices
• Low signal attenuation - stable reception of terrestrial DVB-T2 and cable TV
• Power supply via coaxial cable from the output side (OUT)
• Possibility to transfer power voltage from output (OUT) to input (IN)
• Robust, compact metal casing - easy installation even in limited space
• Operating frequency range: 47-862 MHz - stable operation over a wide frequency band
• Gain control
• High output separation to minimise interference between connected devices
• Low signal attenuation - stable reception of terrestrial DVB-T2 and cable TV
• Power supply via coaxial cable from the output side (OUT)
• Possibility to transfer power voltage from output (OUT) to input (IN)
• Robust, compact metal casing - easy installation even in limited space
The active RTA-140 splitter is a high-quality element of the antenna installation, designed to divide the signal into four television receivers.
• Splitting signal into 4 receivers without compromising picture and sound quality
• Operating frequency range: 47-862 MHz - stable operation over a wide frequency band
• Gain control
• High output separation to minimise interference between connected devices
• Low signal attenuation - stable reception of terrestrial DVB-T2 and cable TV
• Power supply via coaxial cable from the output side (OUT)
• Possibility to transfer power voltage from output (OUT) to input (IN)
• Robust, compact metal casing - easy installation even in limited space
• Operating frequency range: 47-862 MHz - stable operation over a wide frequency band
• Gain control
• High output separation to minimise interference between connected devices
• Low signal attenuation - stable reception of terrestrial DVB-T2 and cable TV
• Power supply via coaxial cable from the output side (OUT)
• Possibility to transfer power voltage from output (OUT) to input (IN)
• Robust, compact metal casing - easy installation even in limited space
The AWS-1036 (1 input) is designed for RTV installations. The unit has 4 independently adjustable outputs.
• Inputs: 1: 87-790 MHz
• Number of outputs: 4
• Maximum gain: 23 dB
• Maximum output signal level: 100 dBμV
• Gain adjustment range: 14 dB
• Capable of feeding an antenna preamplifier
• Number of outputs: 4
• Maximum gain: 23 dB
• Maximum output signal level: 100 dBμV
• Gain adjustment range: 14 dB
• Capable of feeding an antenna preamplifier
The AWS-1141 (1 input, 1 output) is intended for use in RTV installations. The unit has the capability of supplying the preamplifiers with 12 V DC.
• Inputs: 1: 47-790 MHz
• Number of outputs: 1
• Maximum gain: 21 dB
• Maximum output signal level: 106 dBμV
• Gain adjustment range: 10 dB
• Capable of feeding an antenna preamplifier
• Number of outputs: 1
• Maximum gain: 21 dB
• Maximum output signal level: 106 dBμV
• Gain adjustment range: 10 dB
• Capable of feeding an antenna preamplifier
The AWS-1142 (1 input, 2 outputs) is intended for use in RTV installations. The unit has the capability of supplying the preamplifiers with 12 V DC.
• Inputs: 1: 87-790 MHz
• Number of outputs: 2
• Maximum gain: 19 dB
• Maximum output signal level: 104 dBμV
• Gain adjustment range: 10 dB
• Capable of feeding an antenna preamplifier
• Number of outputs: 2
• Maximum gain: 19 dB
• Maximum output signal level: 104 dBμV
• Gain adjustment range: 10 dB
• Capable of feeding an antenna preamplifier
The AWS-1143 (1 input, 3 outputs) is intended for use in RTV installations. It is capable of supplying preamplifiers with 12 V DC.
• Inputs: 1: 87-790 MHz
• Number of outputs: 3
• Max. gain: 19 dB
• Max. output level power: 104 dBμV
• Gain adjustment: 10 dB
• Preamplifier power supply
• Number of outputs: 3
• Max. gain: 19 dB
• Max. output level power: 104 dBμV
• Gain adjustment: 10 dB
• Preamplifier power supply
The AWS-1144 (1 input, 4 outputs) is intended for use in RTV installations. The unit has the capability of supplying the preamplifiers with 12 V DC.
• Inputs: 1: 87-790 MHz
• Number of outputs: 4
• Maximum gain: 15 dB
• Maximum output signal level: 100 dBμV
• Gain adjustment range: 10 dB
• Capable of feeding an antenna preamplifier
• Number of outputs: 4
• Maximum gain: 15 dB
• Maximum output signal level: 100 dBμV
• Gain adjustment range: 10 dB
• Capable of feeding an antenna preamplifier
The AWS-141M (1 input, 1 output) is designed for RTV installations. Automatic power supply function for 12 V DC preamplifiers.
• Inputs: 1: 87-774 MHz
• Number of outputs: 1
• Maximum gain: 20 dB
• Maximum output signal level: 112 dBμV
• Gain adjustment range: 14 dB
• Capable of feeding an antenna preamplifier
• Number of outputs: 1
• Maximum gain: 20 dB
• Maximum output signal level: 112 dBμV
• Gain adjustment range: 14 dB
• Capable of feeding an antenna preamplifier
The AWS-142M (1 input, 2 outputs) is intended for use in RTV installations. Automatic power supply function for 12 V DC preamplifiers.
• Inputs: 1: 87-774 MHz
• Number of outputs: 2
• Maximum gain: 20 dB
• Maximum output signal level: 101 dBμV
• Gain adjustment range: 15 dB
• Capable of feeding an antenna preamplifier
• Number of outputs: 2
• Maximum gain: 20 dB
• Maximum output signal level: 101 dBμV
• Gain adjustment range: 15 dB
• Capable of feeding an antenna preamplifier
The AWS-143M (1 input, 3 outputs) is intended for use in RTV installations. Automatic power supply function for 12 V DC preamplifiers.
• Inputs: 1: 87-774 MHz
• Number of outputs: 3
• Maximum gain: 20 dB
• Maximum output signal level: 103 dBμV
• Gain adjustment range: 15 dB
• Capable of feeding an antenna preamplifier
• Number of outputs: 3
• Maximum gain: 20 dB
• Maximum output signal level: 103 dBμV
• Gain adjustment range: 15 dB
• Capable of feeding an antenna preamplifier
The AWS-144M (1 input, 4 outputs) is intended for use in RTV installations. Automatic power supply function for 12 V DC preamplifiers.
• Inputs: 1: 87-774 MHz
• Number of outputs: 4
• Maximum gain: 17 dB
• Maximum output level: 100 dBμV
• Gain adjustment range: 14 dB
• Possibility to power an antenna preamplifier
• Number of outputs: 4
• Maximum gain: 17 dB
• Maximum output level: 100 dBμV
• Gain adjustment range: 14 dB
• Possibility to power an antenna preamplifier
The AWS-1241 (1 input, 1 output) is intended for use in RTV installations. The device has a possibility of powering preamplifiers with 12 V DC. Gain 28...31 dB.
• Inputs: 1: 87-790 MHz
• Number of outputs: 1
• Maximum gain: 31 dB
• Maximum output signal level: 109 dBμV
• Gain adjustment range: 12 dB
• Capable of feeding an antenna preamplifier
• Number of outputs: 1
• Maximum gain: 31 dB
• Maximum output signal level: 109 dBμV
• Gain adjustment range: 12 dB
• Capable of feeding an antenna preamplifier
The AWS-1242 (1 input, 2 outputs) is intended for use in RTV installations. The device has the possibility of supplying preamplifiers with 12 V DC. Gain 25...27 dB.
• Inputs: 1: 87-790 MHz
• Number of outputs: 2
• Maximum gain: 27 dB
• Maximum output signal level: 105 dBμV
• Gain adjustment range: 12 dB
• Capable of feeding an antenna preamplifier
• Number of outputs: 2
• Maximum gain: 27 dB
• Maximum output signal level: 105 dBμV
• Gain adjustment range: 12 dB
• Capable of feeding an antenna preamplifier
The AWS-1243 (1 input, 3 outputs) is intended for use in RTV installations. The device has a possibility of powering preamplifiers with 12 V DC. Gain 24...26 dB.
• Inputs: 1: 87-790 MHz
• Number of outputs: 3
• Maximum gain: 26 dB
• Maximum output signal level: 104 dBμV
• Gain adjustment range: 12 dB
• Capable of feeding an antenna preamplifier
• Number of outputs: 3
• Maximum gain: 26 dB
• Maximum output signal level: 104 dBμV
• Gain adjustment range: 12 dB
• Capable of feeding an antenna preamplifier
The AWS-1244 (1 input, 4 outputs) is intended for use in RTV installations. The device has a possibility of supplying preamplifiers with 12 V DC. Gain 21...23 dB.
• Inputs: 1: 47-862 MHz
• Number of outputs: 4
• Maximum gain: 23 dB
• Maximum output signal level: 101 dBμV
• Gain adjustment range: 12 dB
• Capable of feeding an antenna preamplifier
• Number of outputs: 4
• Maximum gain: 23 dB
• Maximum output signal level: 101 dBμV
• Gain adjustment range: 12 dB
• Capable of feeding an antenna preamplifier
The APL-102 amplifier is designed to amplify weak FM/DAB+ and VHF DVB-T/T2 signals. Gain 25 dB. Powered by 12 V DC.
• Suitable for outdoor use
• Number of inputs: 1
• Number of outputs: 1
• Band: 87 - 230 MHz
• Gain: 25 dB
• Max. signal output level: 97 dBμV
• Number of inputs: 1
• Number of outputs: 1
• Band: 87 - 230 MHz
• Gain: 25 dB
• Max. signal output level: 97 dBμV
The LNA169-5G 24 dB antenna box amplifier is designed for the reception of DVB-T2 digital terrestrial television signals.
• Suitable for all antennas manufactured by DIPOL
• Operating band: 174 - 694 MHz
• Max. gain: 24 dB
• High resistance to interfering signals: FM radio, CB, GSM telephony, LTE800, GSM900, Wi-Fi, Bluetooth, LTE
• Operating band: 174 - 694 MHz
• Max. gain: 24 dB
• High resistance to interfering signals: FM radio, CB, GSM telephony, LTE800, GSM900, Wi-Fi, Bluetooth, LTE
The LNA177-5G 27 dB antenna box amplifier is designed for reception of DVB-T2 digital terrestrial television signals.
• Suitable for all antennas manufactured by DIPOL
• Operating band: 174 - 694 MHz
• Max. gain: 27 dB
• High resistance to interfering signals: FM radio, CB, GSM telephony, LTE800, GSM900, Wi-Fi, Bluetooth, LTE
• Operating band: 174 - 694 MHz
• Max. gain: 27 dB
• High resistance to interfering signals: FM radio, CB, GSM telephony, LTE800, GSM900, Wi-Fi, Bluetooth, LTE
The LNA188-5G 32 dB antenna box amplifier is designed for the reception of DVB-T2 digital terrestrial television signals.
• Suitable for all antennas manufactured by DIPOL
• Operating band: 174 - 694 MHz
• Max. gain: 32 dB
• High resistance to interfering signals: FM radio, CB, GSM telephony, LTE800, GSM900, Wi-Fi, Bluetooth, LTE
• Operating band: 174 - 694 MHz
• Max. gain: 32 dB
• High resistance to interfering signals: FM radio, CB, GSM telephony, LTE800, GSM900, Wi-Fi, Bluetooth, LTE
The APL-109e amplifier is designed to amplify weak DAB+ and DVB-T/T2 signals. Gain 27/29 dB. Powered by 12 V DC.
• Capable of being mounted outdoors
• Number of inputs: 1
• Number of outputs: 1
• Operating band: 174 - 790 MHz
• Maximum gain: 28 dB
• Maximum output signal level: 100 dBμV
• Number of inputs: 1
• Number of outputs: 1
• Operating band: 174 - 790 MHz
• Maximum gain: 28 dB
• Maximum output signal level: 100 dBμV
The APL-107e amplifier is designed to amplify weak DAB+ and DVB-T/T2 signals. Gain 21/23 dB. Powered by 12 V DC.
• Capable of being mounted outdoors
• Number of inputs: 1
• Number of outputs: 1
• Operating band: 174 - 790 MHz
• Maximum gain: 23 dB
• Maximum output signal level: 100 dBμV
• Number of inputs: 1
• Number of outputs: 1
• Operating band: 174 - 790 MHz
• Maximum gain: 23 dB
• Maximum output signal level: 100 dBμV
The APL-103e amplifier is designed to amplify weak DAB+ and DVB-T/T2 signals. Gain 10/14 dB. Powered by 12 V DC.
• Capable of being mounted outdoors
• Number of inputs: 1
• Number of outputs: 1
• Operating band: 174 - 790 MHz
• Maximum gain: 14 dB
• Maximum output signal level: 100 dBμV
• Number of inputs: 1
• Number of outputs: 1
• Operating band: 174 - 790 MHz
• Maximum gain: 14 dB
• Maximum output signal level: 100 dBμV
The APL-104 amplifier is designed to amplify weak FM/DAB+ and DVB-T/T2 signals. Gain of 18...23 dB. Powered with 12 V DC.
• Can be mounted outdoors
• Number of inputs: 1
• Number of outputs: 1
• Operating band: 87-790 MHz
• Maximum gain: 23 dB
• Maximum output signal level: 95 dBμV
• Number of inputs: 1
• Number of outputs: 1
• Operating band: 87-790 MHz
• Maximum gain: 23 dB
• Maximum output signal level: 95 dBμV
Amplifier designed for FM signals in the 88-108 MHz range.
• Capable of being mounted outdoors
• Number of inputs: 1
• Number of outputs: 1
• Operating band: 88 - 108 MHz
• Maximum gain: 18 dB
• Maximum output signal level: 100 dBμV
• Number of inputs: 1
• Number of outputs: 1
• Operating band: 88 - 108 MHz
• Maximum gain: 18 dB
• Maximum output signal level: 100 dBμV
The PR-310 amplifier is used to amplify RTV/SAT signals in the 5 - 2400 MHz band.
• Gain 10 dB
• It amplifies all bands: FM/DAB+, DVB-T2, DVB-S/S2
• Frequency range 5-2400 MHz
• DC pass-through 13 V/18 V 500 mA
• It amplifies all bands: FM/DAB+, DVB-T2, DVB-S/S2
• Frequency range 5-2400 MHz
• DC pass-through 13 V/18 V 500 mA
The AB011T mast amplifier is a device designed for individual installations or small community installations for a dozen or so outlets, e.g. in single-family houses.
• Power supply 4.5-12 V 60 mA
• LTE signal attenuation (> 694 MHz)
• 26 dB gain in the 470-694 MHz band
• Gain control (switch)
• Small size cast metal case put into compact size plastic housing
• LTE signal attenuation (> 694 MHz)
• 26 dB gain in the 470-694 MHz band
• Gain control (switch)
• Small size cast metal case put into compact size plastic housing
Masthead antenna amplifier Terra MA080T R81080 is dedicated for outdoor applications in individual antenna systems and small MATV systems distributing the signal to tens of outlets.
• Power supply 12 V 60 mA
• LTE signal attenuation LTE 700 (> 694 MHz)
• 20 dB gain in the FM, VHF band, and 30 dB in UHF band
• Gain control with a potentiometer
• Small size cast metal case put into compact size plastic housing
• LTE signal attenuation LTE 700 (> 694 MHz)
• 20 dB gain in the FM, VHF band, and 30 dB in UHF band
• Gain control with a potentiometer
• Small size cast metal case put into compact size plastic housing
Terra's MA081L mast amplifier is a device designed for individual installations or small community installations for several dozen outlets.
• Power supply 12 V 60 mA
• LTE signal attenuation LTE 700 (> 694 MHz)
• 20 dB gain in the FM, VHF band, and 30 dB in UHF band
• Gain control with a potentiometer
• Small size cast metal case put into compact size plastic housing
• LTE signal attenuation LTE 700 (> 694 MHz)
• 20 dB gain in the FM, VHF band, and 30 dB in UHF band
• Gain control with a potentiometer
• Small size cast metal case put into compact size plastic housing
Terra's MA082T mast amplifier is a device designed for individual installations or small community installations for several dozen outlets.
• Power supply 12 V 60 mA
• LTE signal attenuation LTE 700 (> 694 MHz)
• 20 dB gain in the FM, VHF band, and 30 dB in UHF band
• Gain control with a potentiometer
• Small size cast metal case put into compact size plastic housing
• LTE signal attenuation LTE 700 (> 694 MHz)
• 20 dB gain in the FM, VHF band, and 30 dB in UHF band
• Gain control with a potentiometer
• Small size cast metal case put into compact size plastic housing
AB010 mast amplifier designed for individual installations or small community installations for several outlets. Gain of 15 dB in the UHF band.
• Ideal for the amplification of strongly noisy signals
• UHF 15 dB boost
• Universal DC 5 V or 12 V power supply
• UHF 15 dB boost
• Universal DC 5 V or 12 V power supply
AB011 mast amplifier designed for individual installations or small community installations for several outlets. Gain of 27 dB in the UHF band.
• Ideal for the amplification of strongly noisy signals
• UHF boost of 27 dB
• Universal DC 5 V or 12 V power supply
• UHF boost of 27 dB
• Universal DC 5 V or 12 V power supply
AB012 mast amplifier designed for individual installations or small community installations for several outlets. Gain of 22 dB in the UHF band.
• Ideal for the amplification of strongly noisy signals
• UHF 22 dB boost
• Universal DC 5 V or 12 V power supply
• UHF 22 dB boost
• Universal DC 5 V or 12 V power supply
MX062 mast amplifier (inputs: FM+VHF, 2xUHF) designed for RF installations. Gain 30...34 dB.
• 12 V / 80 mA power supply
• 30 dB amplification in FM+VHF band
• 34 dB gain in the UHF band
• On/Off switch allowing 12 V to be sent to the antenna preamplifier
• 30 dB amplification in FM+VHF band
• 34 dB gain in the UHF band
• On/Off switch allowing 12 V to be sent to the antenna preamplifier
HS013 amplifier (1 input/2 output) for the FM/VHF/UHF band intended for small and medium-sized RTV installations. 22 dB gain, 12 V DC switch.
• DVB-T antenna amplifier proven in thousands of locations
• Optional 12 VDC supply voltage for an preamplifier
• Max gain of 22 dB
• Gain adjustment range of 12 dB (UHF)
• Maximum output level of 105 dBμV
• Low noise level
• Built-in two way splitter
• Optional 12 VDC supply voltage for an preamplifier
• Max gain of 22 dB
• Gain adjustment range of 12 dB (UHF)
• Maximum output level of 105 dBμV
• Low noise level
• Built-in two way splitter
AB011L mast amplifier with LTE filter designed for RTV installations for several outlets. Gain of 26 dB in the UHF band.
• Flexible supply voltage: 4.5-12 VDC, 60 mA
• 26 dB gain in 470-790 MHz band
• LTE filter (>790 MHz)
• Low noise <1 dB
• Gain switch
• Small size cast metal case put into compact size plastic housing
• 26 dB gain in 470-790 MHz band
• LTE filter (>790 MHz)
• Low noise <1 dB
• Gain switch
• Small size cast metal case put into compact size plastic housing
RF amplifier HS-018T for small to medium-sized radio and television systems. Separate controls for FM/DAB+/VHF and UHF bands.
• Equipped with 1 input and 2 RF outputs
• Maximum gain 26 dB
• Separate adjustment for FM/DAB+/VHF bands in the range 0...15 dB and UHF in the range 0...12 dB
• Built-in cable characteristic pre-correction - achieving higher levels at higher frequencies
• Built-in LTE700 filter - reduces interference from 5G networks
• Signal amplification - improves the quality of terrestrial TV reception
• Application in home installations and small RTV networks
• Maximum gain 26 dB
• Separate adjustment for FM/DAB+/VHF bands in the range 0...15 dB and UHF in the range 0...12 dB
• Built-in cable characteristic pre-correction - achieving higher levels at higher frequencies
• Built-in LTE700 filter - reduces interference from 5G networks
• Signal amplification - improves the quality of terrestrial TV reception
• Application in home installations and small RTV networks
HS016 amplifier (1 in/2 out) for the FM/VHF/UHF band intended for small and medium-sized RF installations. Gain 20...22 dB
• Ideal for amplification of DVB-T and DAB digital radio signals
• Maximum gain 22 dB
• Adjustable gain for VHF and UHF channels
• Maximum output signal level 104 dBμV
• Maximum gain 22 dB
• Adjustable gain for VHF and UHF channels
• Maximum output signal level 104 dBμV
The SA003 amplifier is designed to amplify satellite TV signals in the 950 MHz - 2400 MHz band in RTV/SAT installations.
• Signal amplifier for DVB-T/T2+SAT lines
• Power supply from receiver
• Increase max. 22 dB
• Max. output level 118 dBμV
• Passive terrestrial TV path
• Small dimensions
• Power supply from receiver
• Increase max. 22 dB
• Max. output level 118 dBμV
• Passive terrestrial TV path
• Small dimensions
The WWK Maestro is a new generation channel amplifier with 4 inputs for DVB-T2 digital terrestrial antennas.
• Maximum output level 93 dBµV
• 4 UHF+VHF inputs
• 32 digital channel filters with high selectivity and wide AGC range
• Automatic detection of appropriate signals
• 5G protected technology
• Compact dimensions and mast housing
• Remote power supply
• Self-installation for everyone
• 4 UHF+VHF inputs
• 32 digital channel filters with high selectivity and wide AGC range
• Automatic detection of appropriate signals
• 5G protected technology
• Compact dimensions and mast housing
• Remote power supply
• Self-installation for everyone
Masthead antenna amplifier AM-346 dedicated for RF systems powered by 24 VDC.
• Supply voltage 24 V
• Number of inputs: 3
• Number of outputs: 1
• 20 dB of gain in the FM+VHF band and 32 dB gain in the UHF band
• 2 On/Off potentiometers that allow 24 VDC voltage and 50 mA current to be sent to antenna preamplifiers through each of the two UHF inputs
• Die-cast housing inside a compact plastic case
• Number of inputs: 3
• Number of outputs: 1
• 20 dB of gain in the FM+VHF band and 32 dB gain in the UHF band
• 2 On/Off potentiometers that allow 24 VDC voltage and 50 mA current to be sent to antenna preamplifiers through each of the two UHF inputs
• Die-cast housing inside a compact plastic case
Antenna amplifier AI-200 VHF/UHF (1 in/2 output) used in small and medium TV installations to distribute the signal to several receivers.
• Home amplifier with built-in splitter
• Maximum gain 24 dB
• Gain adjustment for VHF/FM and UHF band
• Maximum output signal level 105 dBμV
• Maximum gain 24 dB
• Gain adjustment for VHF/FM and UHF band
• Maximum output signal level 105 dBμV
The AI-223 amplifier is used as a subscriber amplifier to distribute the signal from cable TV or a collective installation to several receivers.
• Amplifier for home antenna systems with two outputs
• Passive return channel 0-65 MHz
• Max gain of 25 dB
• Gain adjustment in VHF/FM range
• 12 VDC power option for a preamplifier
• Max output level of 105 dBμV
• Passive return channel 0-65 MHz
• Max gain of 25 dB
• Gain adjustment in VHF/FM range
• 12 VDC power option for a preamplifier
• Max output level of 105 dBμV
CA-215 VHF/UHF antenna amplifier (1 in/2 output) for small and medium TV installations. The preamplifier can be supplied with 12 V DC.
• Amplifier for home antenna systems with two outputs
• Max gain of 25 dB
• Separate gain adjustment in VHF/FM and UHF bands
• 12 VDC power option for a preamplifier
• Max output level of 105 dBμV
• Max gain of 25 dB
• Separate gain adjustment in VHF/FM and UHF bands
• 12 VDC power option for a preamplifier
• Max output level of 105 dBμV
Terra's HS-004T house amplifier is dedicated for use in shared antenna systems with several tens outlets.
• Integrated filter for LTE 700 signal
• 39 dB gain in the FM and BIII bands; 44 dB gain in UHF band
• Switching between gain stages using discrete switches
• Additional, smooth gain control with potentiometers
• Smooth slope adjustment for the gain pattern
• Switchable (ON/OFF) 12 VDC/100 mA power supply to a preamplifier
• Die-cast housing for highly efficient screening to prevent the penetration of interfering signals into the unit
• 39 dB gain in the FM and BIII bands; 44 dB gain in UHF band
• Switching between gain stages using discrete switches
• Additional, smooth gain control with potentiometers
• Smooth slope adjustment for the gain pattern
• Switchable (ON/OFF) 12 VDC/100 mA power supply to a preamplifier
• Die-cast housing for highly efficient screening to prevent the penetration of interfering signals into the unit
The MA-049T house amplifier is a device designed for individual or community installations, e.g. in single-family houses, multi-family buildings.
• Integrated filter LTE 700 signal attenuation
• 30 dB gain in the FM and VHF bands; 34 dB gain in UHF band
• Switchable (ON/OFF) 12 VDC/60 mA power supply to a preamplifier
• Die-cast housing for highly efficient screening to prevent the penetration of interfering signals into the unit
• 30 dB gain in the FM and VHF bands; 34 dB gain in UHF band
• Switchable (ON/OFF) 12 VDC/60 mA power supply to a preamplifier
• Die-cast housing for highly efficient screening to prevent the penetration of interfering signals into the unit
Terra's MA050T house amplifier is dedicated for use in shared antenna systems with several outlets, for example in single- or multi-family buildings.
• Built-in cable pre-correction
• integrated LTE 700 signal attenuation filter
• 30 dB gain in FM, BIII band and 34 dB gain in UHF band
• On/Off switch allowing 12 volts and 60 mA current to be sent to the antenna preamplifier
• The die-cast housing provides high efficiency shielding to prevent interfering signals from penetrating inside the unit
• integrated LTE 700 signal attenuation filter
• 30 dB gain in FM, BIII band and 34 dB gain in UHF band
• On/Off switch allowing 12 volts and 60 mA current to be sent to the antenna preamplifier
• The die-cast housing provides high efficiency shielding to prevent interfering signals from penetrating inside the unit
Terra’s MA-075T FM/TV house amplifier is dedicated to individual antenna systems and small SMATV systems distributing the signal to tens of outlets.
• Integrated filter LTE 700 signal attenuation
• 35 dB gain in the FM and VHF bands; 47 dB gain in UHF band
• Switchable (ON/OFF) 12 VDC/100 mA power supply to a preamplifier
• Die-cast housing for highly efficient screening to prevent the penetration of interfering signals into the unit
• 35 dB gain in the FM and VHF bands; 47 dB gain in UHF band
• Switchable (ON/OFF) 12 VDC/100 mA power supply to a preamplifier
• Die-cast housing for highly efficient screening to prevent the penetration of interfering signals into the unit
Terra’s MA-076T TERRA FM/TV house amplifier is dedicated large SMATV systems.
• Integrated filter LTE 700 signal attenuation
• Inputs: FM, VHF, 2 x UHF
• 35 dB gain in the FM and VHF bands; 47 dB gain in UHF band
• Switchable (ON/OFF) 12 VDC/100 mA power supply to a preamplifier
• Die-cast housing for highly efficient screening to prevent the penetration of interfering signals into the unit
• Inputs: FM, VHF, 2 x UHF
• 35 dB gain in the FM and VHF bands; 47 dB gain in UHF band
• Switchable (ON/OFF) 12 VDC/100 mA power supply to a preamplifier
• Die-cast housing for highly efficient screening to prevent the penetration of interfering signals into the unit
The high-power HA-131T house amplifier is designed to amplify radio and TV signals. It is characterised by a high gain of 36 dB.
• 36 dB gain in the 88-694 MHz band
• LTE 700 signal attenuation: (> 694 MHz)
• Die-cast housing
• Smooth gain control
• Smooth slope adjustment for the gain pattern
• Built-in test input -20 dB
• Built-in test output -30 dB
• LTE 700 signal attenuation: (> 694 MHz)
• Die-cast housing
• Smooth gain control
• Smooth slope adjustment for the gain pattern
• Built-in test input -20 dB
• Built-in test output -30 dB
HS004L building amplifier for the VHF (88-230 MHz)/UHF (470-790 MHz) bands. The maximum gain in the VHF band is 39 dB, in the UHF band it is 44 dB.
• Universal amplifier with high gain
• Integrated LTE signal filter
• 39 dB of gain in the VHF band and 44 dB of gain in the UHF band
• Switching between gain stages using discrete switches
• Additional stepless gain adjustment with potentiometers
• Smooth slope adjustment for gain characteristics
• Possibility to power the preamplifier with 12 V
• Open casing
• Integrated LTE signal filter
• 39 dB of gain in the VHF band and 44 dB of gain in the UHF band
• Switching between gain stages using discrete switches
• Additional stepless gain adjustment with potentiometers
• Smooth slope adjustment for gain characteristics
• Possibility to power the preamplifier with 12 V
• Open casing
HS005L building amplifier for the VHF (88-230 MHz)/UHF (470-790 MHz) bands. The maximum gain in the VHF band is 30 dB, in the UHF band it is 34 dB.
• Universal Terra TV amplifier for use in buildings
• Integrated 4G LTE filter - attenuation of signals above 791 MHz
• Split-band circuitry with separate gain adjustments in VHF (30 dB) and UHF (34 dB) ranges
• Switchable (ON/OFF) 12 VDC / 60 mA supply for a preamplifier
(through the RF input)
• Die-cast housing providing high screening efficiency by preventing the penetration of interfering signals to the unit
• Test output (-30 dB)
• 4-year warranty
• Integrated 4G LTE filter - attenuation of signals above 791 MHz
• Split-band circuitry with separate gain adjustments in VHF (30 dB) and UHF (34 dB) ranges
• Switchable (ON/OFF) 12 VDC / 60 mA supply for a preamplifier
(through the RF input)
• Die-cast housing providing high screening efficiency by preventing the penetration of interfering signals to the unit
• Test output (-30 dB)
• 4-year warranty
The AS038R65 amplifier (1-in/4-out) is designed for cable TV installations providing services also in the return channel band (Internet).
• For use in CATV and DVB-T antenna systems
• Return channel connectivity (Internet)
• Passive return channel is compatible with any CATV network
• Maximum output level of 100 dBμV
• Built-in 4-way splitter
• Max gain of 23 dB, with adjustment range of 16 dB
• Low power consumption (below 3 W)
• Return channel connectivity (Internet)
• Passive return channel is compatible with any CATV network
• Maximum output level of 100 dBμV
• Built-in 4-way splitter
• Max gain of 23 dB, with adjustment range of 16 dB
• Low power consumption (below 3 W)
The MA044M building amplifier is designed for community antenna installations. The amplification in VHFI/FM, VHFIII bands is 30 dB, in the UHF band it is 34 dB.
• Built-in cable pre-correction
• 30 dB gain on FM, BIII and 34 dB gain for each UHF input
On/Off switch enabling sending 12 V voltage and 60 mA current to the antenna preamplifier
• The cast housing ensures high shielding effectiveness, preventing interference signals from penetrating inside the device
• 30 dB gain on FM, BIII and 34 dB gain for each UHF input
On/Off switch enabling sending 12 V voltage and 60 mA current to the antenna preamplifier
• The cast housing ensures high shielding effectiveness, preventing interference signals from penetrating inside the device
The MA045M building amplifier is designed for community antenna installations. The amplification in VHFI/FM, VHFIII bands is 30 dB, in 2xUHF band it is 34 dB.
• Multi-input building amplifier
• Built-in cable pre-correction
• 30/34 dB gain
• Maximum output level 115 dBμV
• Capable of supplying DC 12 V to the antenna preamplifier
• The die-cast housing for effective shielding
• Built-in cable pre-correction
• 30/34 dB gain
• Maximum output level 115 dBμV
• Capable of supplying DC 12 V to the antenna preamplifier
• The die-cast housing for effective shielding
The MA050L building amplifier is designed for small and medium-sized RTV installations. The amplification in the FM/VHFIII bands is 30 dB, in the UHF band it is 34 dB.
• Built-in cable pre-correction
• Integrated LTE attenuation filter
• 30 dB gain in FM, BIII band and 34 dB gain in UHF band
• On/Off switch allowing 12 volts and 60 mA current to be sent to the antenna preamplifier
• Open housing provides high efficiency shielding to prevent interfering signals from penetrating inside the unit
• Integrated LTE attenuation filter
• 30 dB gain in FM, BIII band and 34 dB gain in UHF band
• On/Off switch allowing 12 volts and 60 mA current to be sent to the antenna preamplifier
• Open housing provides high efficiency shielding to prevent interfering signals from penetrating inside the unit
House amplifier used in SMATV and cable systems with return channel.
• Building amplifier
• Dedicated to cable installations
• Frequency range: 5...65 MHz/87...862 MHz
• Push-pull output stage, made of gallium arsenide GaAs
• Characteristics corrector on input of feedforward and return channel
• Outside housing
• Amplification of 40 dB (forward channel) and -5/27 dB (return channel)
• Dedicated to cable installations
• Frequency range: 5...65 MHz/87...862 MHz
• Push-pull output stage, made of gallium arsenide GaAs
• Characteristics corrector on input of feedforward and return channel
• Outside housing
• Amplification of 40 dB (forward channel) and -5/27 dB (return channel)
House amplifier used in SMATV and cable systems with return channel.
• House amplifier
• Dedicated to cable systems
• Frequency range: 5...65 MHz/87...1218 MHz
• Push-pull output stage, made of gallium arsenide GaAs
• Waveform correction filter at input of the transmission and return channel
• Die-cast housing
• Gain of 40 dB (transmission channel) and -5/27 dB (return channel)
• Dedicated to cable systems
• Frequency range: 5...65 MHz/87...1218 MHz
• Push-pull output stage, made of gallium arsenide GaAs
• Waveform correction filter at input of the transmission and return channel
• Die-cast housing
• Gain of 40 dB (transmission channel) and -5/27 dB (return channel)
HA024 building amplifier for use in small and medium-sized RTV installations. Built-in gain switch 18...20/27...30 dB.
• Ideal for amplification of DVB-T and cable TV signals
• Maximum gain 30 dB
• Attenuation correction - recommended for long antenna cable lengths
• Double gain control
• Maximum output signal level 97 dBμV
• Maximum gain 30 dB
• Attenuation correction - recommended for long antenna cable lengths
• Double gain control
• Maximum output signal level 97 dBμV
HA-126 building amplifier (1 in/1 out) for use in community antenna installations to compensate for attenuation of RTV signals. Gain 34 dB.
• Broadband amplifier
• Maximum gain 34 dB
• One of the most popular amplifiers on the market
• Maximum output signal level 117 dBμV
• Gain control within 20 dB
• Cable attenuation correction in the range of 18 dB
• Maximum gain 34 dB
• One of the most popular amplifiers on the market
• Maximum output signal level 117 dBμV
• Gain control within 20 dB
• Cable attenuation correction in the range of 18 dB
HA-131L amplifier with LTE filter for large RTV installations. It is characterised by a high gain of 36 dB.
• High power amplifier designed for TV installations
• 36 dB amplification
• Maximum output level 122 dBμV
• Built-in LTE filter - suppression of unwanted signals above 791 MHz
• Smooth gain adjustment
• Smooth slope adjustment for gain characteristics
• Open housing
• 36 dB amplification
• Maximum output level 122 dBμV
• Built-in LTE filter - suppression of unwanted signals above 791 MHz
• Smooth gain adjustment
• Smooth slope adjustment for gain characteristics
• Open housing
The HA-210 amplifier for large radio frequency installations. It is characterised by a high gain of 36 dB.
• Zero-band TV amplifier
• Open housing for highest screening efficiency
• High gain - up to 36 dB
• 20 dB gain adjustment
• Maximum output signal level 107 dBμV
• Cable attenuation correction 20 dB
• Test input and output
• Open housing for highest screening efficiency
• High gain - up to 36 dB
• 20 dB gain adjustment
• Maximum output signal level 107 dBμV
• Cable attenuation correction 20 dB
• Test input and output
MA-049L building amplifier with LTE filter. The gain in the FM and BIII bands is 30 dB, while in the UHF band it is 34 dB.
• Integrated LTE attenuation filter
• 30 dB gain in the FM, BIII band and 34 dB gain in the UHF band
• On/Off switch allowing 12 V and 60 mA current to be sent to the antenna preamplifier
• Open housing provides high efficiency shielding to prevent interfering signals from penetrating inside the unit
• 30 dB gain in the FM, BIII band and 34 dB gain in the UHF band
• On/Off switch allowing 12 V and 60 mA current to be sent to the antenna preamplifier
• Open housing provides high efficiency shielding to prevent interfering signals from penetrating inside the unit
The MA075L R82330 house amplifier with an LTE filter is used for FM and TV systems, ensuring gain up to 35 dB (in the FM and VHFIII bands) and 47 dB (in the UHF band).
• Integrated LTE filter
• 35 dB gain in FM and VHFIII bands, and 47 dB gain in UHF band
• On-off switch to divert power supply voltage 12 VDC at 100 mA to an optional preamp in the UHF path
• Die-cast housing for high screening efficiency, preventing the external interference from reaching the device
• 35 dB gain in FM and VHFIII bands, and 47 dB gain in UHF band
• On-off switch to divert power supply voltage 12 VDC at 100 mA to an optional preamp in the UHF path
• Die-cast housing for high screening efficiency, preventing the external interference from reaching the device
The MA076L building amplifier with LTE filter is used in RTV installations. The amplification in the FM and VHFIII bands is 35 dB, while in the 2xUHF band it is 47 dB.
• Integrated LTE filter
• 35 dB gain in FM and VHFIII bands, and 47 dB gain in UHF band
• Switch connecting supply voltage (12 VDC, max. 100 mA) to optional preamplifier in the UHF path
• Die-cast housing with high screening efficiency, blocking external interference signals
• 35 dB gain in FM and VHFIII bands, and 47 dB gain in UHF band
• Switch connecting supply voltage (12 VDC, max. 100 mA) to optional preamplifier in the UHF path
• Die-cast housing with high screening efficiency, blocking external interference signals
The DTT MCA101T TERRA masthead correction amplifier is dedicated to work with OTF30x transmitters
• Dedicated to work with TERRA's OTF30x optical transmitters
• Frequency converter
• Automatic Gain Control (AGC) circuit to ensure signal stability
• Built-in LTE700 filter
• Remote DC power supply
• Capable of outdoor mounting
• Frequency converter
• Automatic Gain Control (AGC) circuit to ensure signal stability
• Built-in LTE700 filter
• Remote DC power supply
• Capable of outdoor mounting
The TERRA PA321TP channel amplifier can be used independently, as a part of a multiswitch system, or as a part of Access Point (AiZ).
• 20 independent amplification paths
• Number of inputs: 3 (2xVHF/UHF+FM)
• Amplification for twenty DVB-T/T2 multiplexes
• Remote power supply via coaxial cable or from the included 12 V DC adapter
• AGC – automatic signal level equalization for all channels up to 106 dBμV (for 6 MUXes)
• Amplified frequency range 174...230/470...694 MHz (channels 5-12/21-48)
• High modulation error ratio MER >=36 dB
• Selectivity 30 dB at 1 MHz from channel border – ultra selective SAW (Surface Acoustic Wave) filter
• Output level adjustment 0...20 dB
• Digitally programmable using any Android mobile device or Windows computer
• Protection against unwanted signals (LTE, 5G)
• Preamplifier power supply DC 12 V max. 0.1 A
• Die-cast housing
• Number of inputs: 3 (2xVHF/UHF+FM)
• Amplification for twenty DVB-T/T2 multiplexes
• Remote power supply via coaxial cable or from the included 12 V DC adapter
• AGC – automatic signal level equalization for all channels up to 106 dBμV (for 6 MUXes)
• Amplified frequency range 174...230/470...694 MHz (channels 5-12/21-48)
• High modulation error ratio MER >=36 dB
• Selectivity 30 dB at 1 MHz from channel border – ultra selective SAW (Surface Acoustic Wave) filter
• Output level adjustment 0...20 dB
• Digitally programmable using any Android mobile device or Windows computer
• Protection against unwanted signals (LTE, 5G)
• Preamplifier power supply DC 12 V max. 0.1 A
• Die-cast housing
The ma400 amplifier is a top-of-the-range device designed to amplify signals from the FM, VHF and UHF bands.
• Three independent amplification paths for FM, VHF/DAB, UHF
• Built-in crossover
• Smooth gain control -15...0 dB
• Additional attenuator -10 dB
• Power supply for preamplifiers DC 12 V 0.1A
• Gain 30dB
• Maximum signal level of IMD3 VHF 116
• Built-in crossover
• Smooth gain control -15...0 dB
• Additional attenuator -10 dB
• Power supply for preamplifiers DC 12 V 0.1A
• Gain 30dB
• Maximum signal level of IMD3 VHF 116
ALCAD's CAD-824 programmable, multi-band, channel amplifier is designed for community antenna installations for reception of DVB-T2 digital terrestrial television.
• Amplifier dedicated for SMATV antenna systems
• 4 VHF+UHF inputs, 1 FM input
• Auto-configuration function
• DC feeding for preamplifiers 12 - 24 V
• High selectivity with 32 filters
• High gain with AGC
• Converter function
• Excellent output signal quality
• Easy installation and configuration
• 4 VHF+UHF inputs, 1 FM input
• Auto-configuration function
• DC feeding for preamplifiers 12 - 24 V
• High selectivity with 32 filters
• High gain with AGC
• Converter function
• Excellent output signal quality
• Easy installation and configuration
The Johansson PROFINO Revolution 6711 FM-DAB/VHF-2xUHF is a channel amplifier for use in large collective RTV installations.
• Amplifier designed for community antenna installations
• Automatic gain control (AGC) in real time
• Independent, selective amplification for 30 channel paths/filters in the VHF/UHF band
• Converter function
• Appropriate for transmission of digital terrestrial television signals DVB-T
• LTE signal attenuation switch (4G band > 790 MHz, 5G band > 694 MHz)
• Low power consumption
• Easy installation and configuration
• Automatic gain control (AGC) in real time
• Independent, selective amplification for 30 channel paths/filters in the VHF/UHF band
• Converter function
• Appropriate for transmission of digital terrestrial television signals DVB-T
• LTE signal attenuation switch (4G band > 790 MHz, 5G band > 694 MHz)
• Low power consumption
• Easy installation and configuration
The WWK ALPHA 2 is an advanced digital channel amplifier designed for professional SMATV antenna installations and extensive individual installations.
• Digital selective signal processing DVB-T2 (DSP)
• Channel conversion within the VHF and UHF bands
• Individual level control of each MUX and global output control
• DAB wideband mode (174-230 MHz) without channel programming
• Advanced LTE 700/LTE 800 filtering, SAW filter active in LTE 700 mode
• SMART SCAN function - automatic search for DVB-T2 signals
• Intelligent power control of preamplifiers (Auto Preamp Control)
• High immunity to overdrive and interference (IMD3 to 122 dBµV)
• Class A shielding according to EN 50083-2
• Compact metal casing
• Channel conversion within the VHF and UHF bands
• Individual level control of each MUX and global output control
• DAB wideband mode (174-230 MHz) without channel programming
• Advanced LTE 700/LTE 800 filtering, SAW filter active in LTE 700 mode
• SMART SCAN function - automatic search for DVB-T2 signals
• Intelligent power control of preamplifiers (Auto Preamp Control)
• High immunity to overdrive and interference (IMD3 to 122 dBµV)
• Class A shielding according to EN 50083-2
• Compact metal casing
The WWK-951 amplifier is designed for antenna installations in single-family houses, residences, hotels, boarding houses, holiday homes, schools, hospitals.
• Amplifier designed for community antenna installations
• Independent, selective amplification for 5 channel paths/filters in the UHF band
• Adjustable channel path width: 1...6 channels (8...48 MHz)
• Power for antenna preamplifiers for UHF1-UHF2 inputs
• Built-in indication of antenna preamplifiers power supply operating status
• Adapted for transmission of analogue and digital terrestrial television signals DVB-T/T2
• Low power consumption
• Easy installation and configuration
• Independent, selective amplification for 5 channel paths/filters in the UHF band
• Adjustable channel path width: 1...6 channels (8...48 MHz)
• Power for antenna preamplifiers for UHF1-UHF2 inputs
• Built-in indication of antenna preamplifiers power supply operating status
• Adapted for transmission of analogue and digital terrestrial television signals DVB-T/T2
• Low power consumption
• Easy installation and configuration
The AZS-02 separator supplies DC power to antenna amplifier/s in situations when it is not possible using a typical power supply with a built-in DC injector.
• Bandwidth: 5 - 1000 MHz
• Maximum voltage value: 24 V
• Maximum current value: 300 mA
• 3.5 mm JACK socket
• Maximum voltage value: 24 V
• Maximum current value: 300 mA
• 3.5 mm JACK socket
The PS-1 antenna power supply unit is used to supply DC 12 V to antenna amplifiers with a maximum current consumption of 300 mA.
• DC 12 V / max. 300 mA
• LED monitoring
• Easy connection via F-type connectors
• LED monitoring
• Easy connection via F-type connectors
This power supply unit is designed to supply 12 VDC to terrestrial TV antenna amplifiers and preamplifiers with a current draw of up to 100 mA.
• Type: switched-mode
• Input voltage: AC 100-230 V 50/60 Hz
• Output voltage: DC 12 V
• Max. output current: 100 mA
• TV output: IEC plug
• Input voltage: AC 100-230 V 50/60 Hz
• Output voltage: DC 12 V
• Max. output current: 100 mA
• TV output: IEC plug
The power supply is designed to supply DC 12 V to terrestrial TV antenna amplifiers and preamplifiers with a current consumption of up to 100 mA.
• Type: transformer
• Input voltage: AC 230 V 50 Hz
• Output voltage: DC 12 V
• Max. output current: 100 mA
• Power supply: AC 13 V/20 mA
• TV output: IEC plug
• Input voltage: AC 230 V 50 Hz
• Output voltage: DC 12 V
• Max. output current: 100 mA
• Power supply: AC 13 V/20 mA
• TV output: IEC plug
Switched-mode power supply used to power antenna amplifiers via power separators.
• Type: switched-mode
• Input voltage: AC 100...230 V 50/60 Hz
• Output voltage: DC 12 V
• Max. output current: 300 mA
• Input voltage: AC 100...230 V 50/60 Hz
• Output voltage: DC 12 V
• Max. output current: 300 mA
The power supply is designed to supply DC 12 V to terrestrial TV antenna amplifiers and preamplifiers with a current consumption of up to 300 mA.
• Type: pulsed
• Input voltage: AC 230 V 50 Hz
• Output voltage: DC 12 V
• Max. output current: 300 mA
• TV output: IEC plug
• Cable connection: F-type connector
• Input voltage: AC 230 V 50 Hz
• Output voltage: DC 12 V
• Max. output current: 300 mA
• TV output: IEC plug
• Cable connection: F-type connector
The DR-60-12 power supply is designed to power Terra channel amplifiers, transmodulators, IP streamers mounted on universal DIN rails.
• 12 V DC power supply
• Current capacity 4.5 A
• Designed for TERRA channel amplifiers, transmodulators, IP streamers
• Mounted on universal DIN rails for rack cabinets
• Current capacity 4.5 A
• Designed for TERRA channel amplifiers, transmodulators, IP streamers
• Mounted on universal DIN rails for rack cabinets
The UP-413 power supply is designed to provide redundant power to Terra channel amplifiers, transmodulators, IP streamers mounted on universal DIN rails.
• 12 V DC power supply for TERRA panels
• Current capacity 4.5 A
• DIN rail mounting
• Includes tapes for power distribution between panels
• Current capacity 4.5 A
• DIN rail mounting
• Includes tapes for power distribution between panels
The UP413S power supply is designed to supply power to Terra channel amplifiers, transmodulators, IP streamers mounted on universal DIN rails.
• Power supply designed for TERRA headend panels
• Convenient and aesthetically pleasing implementation of the headend power supply
• Output voltage DC 12 V
• Current capacity 4.5 A
• Multiple mounting options (wall, DIN, RACK)
• Built-in RF signal combiner
• Convenient and aesthetically pleasing implementation of the headend power supply
• Output voltage DC 12 V
• Current capacity 4.5 A
• Multiple mounting options (wall, DIN, RACK)
• Built-in RF signal combiner
The AL-105 power supply is used to supply power to Alcad mast-mounted antenna amplifiers supplied with 12 V DC.
• Applied to power Alcad mast-mounted amplifiers supplied with 12 V DC
• Current capacity 100 mA
• Number of outputs: 2
• Current capacity 100 mA
• Number of outputs: 2
The ribbon supply cable 699.20 is used to distribute power between panels of transmodulators, TERRA IP streamers with a width of 36 mm.
• The 699.20 ribbon cable is used to distribute power between panels of TERRA devices
• It allows transmission of 12 VDC between 4 devices
• Designed to connect devices with a width of 36 mm
• It allows transmission of 12 VDC between 4 devices
• Designed to connect devices with a width of 36 mm
The ribbon supply cable 780.20 is used to distribute power between panels of transmodulators, TERRA IP streamers with a width of 48.5 mm.
• The 780.20 ribbon cable is used to distribute power between panels of TERRA devices
• It allows transmission of 12 VDC between 4 devices
• Designed to connect devices with a width of 48 mm
• It allows transmission of 12 VDC between 4 devices
• Designed to connect devices with a width of 48 mm
The 699.20 bridge is used to pass the signal between successive panels of TERRA 36 mm wide channel amplifiers, transmodulators, IP streamers.
• For the transmission of signals between the inputs and outputs of TERRA devices
• Terminated with 2 F-type plugs
• Designed to connect devices with a width of 36 mm
• Terminated with 2 F-type plugs
• Designed to connect devices with a width of 36 mm
