English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
The AZS-02 separator supplies DC power to antenna amplifier/s in situations when it is not possible using a typical power supply with a built-in DC injector.
• Bandwidth: 5 - 1000 MHz
• Maximum voltage value: 24 V
• Maximum current value: 300 mA
• 3.5 mm JACK socket
• Maximum voltage value: 24 V
• Maximum current value: 300 mA
• 3.5 mm JACK socket
This power supply unit is designed to supply 12 VDC to terrestrial TV antenna amplifiers and preamplifiers with a current draw of up to 100 mA.
• Type: switched-mode
• Input voltage: AC 100-230 V 50/60 Hz
• Output voltage: DC 12 V
• Max. output current: 100 mA
• TV output: IEC plug
• Input voltage: AC 100-230 V 50/60 Hz
• Output voltage: DC 12 V
• Max. output current: 100 mA
• TV output: IEC plug
The power supply is designed to provide power to preamplifiers/amplifiers in small terrestrial antenna systems (requiring 12 VDC, with current consumption up to 100 mA).
• For 12 VDC antenna amplifiers/preamplifiers
• Maximum output current 100 mA
• Based on AC transformer, aux. 13 VAC output
• LED indication of the output voltage
• DC injector / RF separator with IEC antenna plug
• Made in Poland
• Maximum output current 100 mA
• Based on AC transformer, aux. 13 VAC output
• LED indication of the output voltage
• DC injector / RF separator with IEC antenna plug
• Made in Poland
The power supply is designed to provide power to preamplifiers/amplifiers in small terrestrial antenna systems (requiring 12 VDC, with current consumption up to 100 mA).
• Type: transformer-based
• Input voltage: 230 VAC, 50 Hz
• Output voltage: 12VDC
• Max. output current: 100 mA
• Ability to power AC 13 V/20 mA devices
• TV output: IEC plug
• Cable connection: F-type connector
• Input voltage: 230 VAC, 50 Hz
• Output voltage: 12VDC
• Max. output current: 100 mA
• Ability to power AC 13 V/20 mA devices
• TV output: IEC plug
• Cable connection: F-type connector
Switched-mode power supply used to power antenna amplifiers via power separators.
• Type: switched-mode
• Input voltage: AC 100...230 V 50/60 Hz
• Output voltage: DC 12 V
• Max. output current: 300 mA
• Input voltage: AC 100...230 V 50/60 Hz
• Output voltage: DC 12 V
• Max. output current: 300 mA
The HDR-60-12 power supply is dedicated for Terra channel amplifiers, transmodulators and IP Terra streamers mounted on universal DIN rail.
• 12 VDC power supply
• 4.5 A output current
• Dedicated for channel amplifiers, transmodulators and TERRA IP streamers
• Mounted on universal DIN rail in RACK cabinets
• 4.5 A output current
• Dedicated for channel amplifiers, transmodulators and TERRA IP streamers
• Mounted on universal DIN rail in RACK cabinets
• A 12 V power supply for TERRA modules,
• Current capacity: 4.5 A,
• DIN rail mounting,
• Distribution cables for passing supply voltage between adjacent modules included in the kit.
• Current capacity: 4.5 A,
• DIN rail mounting,
• Distribution cables for passing supply voltage between adjacent modules included in the kit.
The UP410S R82535 power supply is designed for supplying with 12 VDC voltage a range of TERRA signal processing devices (broadband and channel amplifiers, transmodulators, analog and digital modulators, IPTV modules) mounted on universal DIN rails, e.g. R82538, or on the R82539 mounting plate for 19...
ALCAD's CAD-824 programmable multiband channel amplifier is designed for SMATV antenna systems for receiving DVB-T2 digital terrestrial television.
• Amplifier dedicated for SMATV antenna systems
• 4 VHF+UHF inputs, 1 FM input
• Auto-configuration function
• DC feeding for preamplifiers 12 - 24 V
• High selectivity with 32 filters
• High gain with AGC
• Converter function
• Excellent output signal quality
• Easy installation and configuration
• 4 VHF+UHF inputs, 1 FM input
• Auto-configuration function
• DC feeding for preamplifiers 12 - 24 V
• High selectivity with 32 filters
• High gain with AGC
• Converter function
• Excellent output signal quality
• Easy installation and configuration
The AL-105 supplier is dedicated for powering 12V family of Alcad amplifiers installed on antenna masts. AL-105 is not intended for unprotected outdoor use. It should not be installed in areas with increased humidity, near heaters, radiators and in other hot or cool (in winter) places. The unit requ...
