EN
PL
CZ
DE
IE
HU
PT
RO
SK
Terra's HS-004T house amplifier is dedicated for use in shared antenna systems with several tens outlets.
• Integrated filter for LTE 700 signal
• 39 dB gain in the FM and BIII bands; 44 dB gain in UHF band
• Switching between gain stages using discrete switches
• Additional, smooth gain control with potentiometers
• Smooth slope adjustment for the gain pattern
• Switchable (ON/OFF) 12 VDC/100 mA power supply to a preamplifier
• Die-cast housing for highly efficient screening to prevent the penetration of interfering signals into the unit
• 39 dB gain in the FM and BIII bands; 44 dB gain in UHF band
• Switching between gain stages using discrete switches
• Additional, smooth gain control with potentiometers
• Smooth slope adjustment for the gain pattern
• Switchable (ON/OFF) 12 VDC/100 mA power supply to a preamplifier
• Die-cast housing for highly efficient screening to prevent the penetration of interfering signals into the unit
The MA-049T house amplifier is a device designed for individual or community installations, e.g. in single-family houses, multi-family buildings.
• Integrated filter LTE 700 signal attenuation
• 30 dB gain in the FM and VHF bands; 34 dB gain in UHF band
• Switchable (ON/OFF) 12 VDC/60 mA power supply to a preamplifier
• Die-cast housing for highly efficient screening to prevent the penetration of interfering signals into the unit
• 30 dB gain in the FM and VHF bands; 34 dB gain in UHF band
• Switchable (ON/OFF) 12 VDC/60 mA power supply to a preamplifier
• Die-cast housing for highly efficient screening to prevent the penetration of interfering signals into the unit
Terra's MA050T house amplifier is dedicated for use in shared antenna systems with several outlets, for example in single- or multi-family buildings.
• Built-in cable pre-correction
• integrated LTE 700 signal attenuation filter
• 30 dB gain in FM, BIII band and 34 dB gain in UHF band
• On/Off switch allowing 12 volts and 60 mA current to be sent to the antenna preamplifier
• The die-cast housing provides high efficiency shielding to prevent interfering signals from penetrating inside the unit
• integrated LTE 700 signal attenuation filter
• 30 dB gain in FM, BIII band and 34 dB gain in UHF band
• On/Off switch allowing 12 volts and 60 mA current to be sent to the antenna preamplifier
• The die-cast housing provides high efficiency shielding to prevent interfering signals from penetrating inside the unit
Terra’s MA-075T FM/TV house amplifier is dedicated to individual antenna systems and small SMATV systems distributing the signal to tens of outlets.
• Integrated filter LTE 700 signal attenuation
• 35 dB gain in the FM and VHF bands; 47 dB gain in UHF band
• Switchable (ON/OFF) 12 VDC/100 mA power supply to a preamplifier
• Die-cast housing for highly efficient screening to prevent the penetration of interfering signals into the unit
• 35 dB gain in the FM and VHF bands; 47 dB gain in UHF band
• Switchable (ON/OFF) 12 VDC/100 mA power supply to a preamplifier
• Die-cast housing for highly efficient screening to prevent the penetration of interfering signals into the unit
Terra’s MA-076T TERRA FM/TV house amplifier is dedicated large SMATV systems.
• Integrated filter LTE 700 signal attenuation
• Inputs: FM, VHF, 2 x UHF
• 35 dB gain in the FM and VHF bands; 47 dB gain in UHF band
• Switchable (ON/OFF) 12 VDC/100 mA power supply to a preamplifier
• Die-cast housing for highly efficient screening to prevent the penetration of interfering signals into the unit
• Inputs: FM, VHF, 2 x UHF
• 35 dB gain in the FM and VHF bands; 47 dB gain in UHF band
• Switchable (ON/OFF) 12 VDC/100 mA power supply to a preamplifier
• Die-cast housing for highly efficient screening to prevent the penetration of interfering signals into the unit
The high-power HA-131T house amplifier is designed to amplify radio and TV signals. It is characterised by a high gain of 36 dB.
• 36 dB gain in the 88-694 MHz band
• LTE 700 signal attenuation: (> 694 MHz)
• Die-cast housing
• Smooth gain control
• Smooth slope adjustment for the gain pattern
• Built-in test input -20 dB
• Built-in test output -30 dB
• LTE 700 signal attenuation: (> 694 MHz)
• Die-cast housing
• Smooth gain control
• Smooth slope adjustment for the gain pattern
• Built-in test input -20 dB
• Built-in test output -30 dB
HS004L building amplifier for the VHF (88-230 MHz)/UHF (470-790 MHz) bands. The maximum gain in the VHF band is 39 dB, in the UHF band it is 44 dB.
• Universal amplifier with high gain
• Integrated LTE signal filter
• 39 dB of gain in the VHF band and 44 dB of gain in the UHF band
• Switching between gain stages using discrete switches
• Additional stepless gain adjustment with potentiometers
• Smooth slope adjustment for gain characteristics
• Possibility to power the preamplifier with 12 V
• Open casing
• Integrated LTE signal filter
• 39 dB of gain in the VHF band and 44 dB of gain in the UHF band
• Switching between gain stages using discrete switches
• Additional stepless gain adjustment with potentiometers
• Smooth slope adjustment for gain characteristics
• Possibility to power the preamplifier with 12 V
• Open casing
HS005L building amplifier for the VHF (88-230 MHz)/UHF (470-790 MHz) bands. The maximum gain in the VHF band is 30 dB, in the UHF band it is 34 dB.
• Universal Terra TV amplifier for use in buildings
• Integrated 4G LTE filter - attenuation of signals above 791 MHz
• Split-band circuitry with separate gain adjustments in VHF (30 dB) and UHF (34 dB) ranges
• Switchable (ON/OFF) 12 VDC / 60 mA supply for a preamplifier
(through the RF input)
• Die-cast housing providing high screening efficiency by preventing the penetration of interfering signals to the unit
• Test output (-30 dB)
• 4-year warranty
• Integrated 4G LTE filter - attenuation of signals above 791 MHz
• Split-band circuitry with separate gain adjustments in VHF (30 dB) and UHF (34 dB) ranges
• Switchable (ON/OFF) 12 VDC / 60 mA supply for a preamplifier
(through the RF input)
• Die-cast housing providing high screening efficiency by preventing the penetration of interfering signals to the unit
• Test output (-30 dB)
• 4-year warranty
The AS038R65 amplifier (1-in/4-out) is designed for cable TV installations providing services also in the return channel band (Internet).
• For use in CATV and DVB-T antenna systems
• Return channel connectivity (Internet)
• Passive return channel is compatible with any CATV network
• Maximum output level of 100 dBμV
• Built-in 4-way splitter
• Max gain of 23 dB, with adjustment range of 16 dB
• Low power consumption (below 3 W)
• Return channel connectivity (Internet)
• Passive return channel is compatible with any CATV network
• Maximum output level of 100 dBμV
• Built-in 4-way splitter
• Max gain of 23 dB, with adjustment range of 16 dB
• Low power consumption (below 3 W)
The MA044M building amplifier is designed for community antenna installations. The amplification in VHFI/FM, VHFIII bands is 30 dB, in the UHF band it is 34 dB.
• Built-in cable pre-correction
• 30 dB gain on FM, BIII and 34 dB gain for each UHF input
On/Off switch enabling sending 12 V voltage and 60 mA current to the antenna preamplifier
• The cast housing ensures high shielding effectiveness, preventing interference signals from penetrating inside the device
• 30 dB gain on FM, BIII and 34 dB gain for each UHF input
On/Off switch enabling sending 12 V voltage and 60 mA current to the antenna preamplifier
• The cast housing ensures high shielding effectiveness, preventing interference signals from penetrating inside the device
The MA045M building amplifier is designed for community antenna installations. The amplification in VHFI/FM, VHFIII bands is 30 dB, in 2xUHF band it is 34 dB.
• Multi-input building amplifier
• Built-in cable pre-correction
• 30/34 dB gain
• Maximum output level 115 dBμV
• Capable of supplying DC 12 V to the antenna preamplifier
• The die-cast housing for effective shielding
• Built-in cable pre-correction
• 30/34 dB gain
• Maximum output level 115 dBμV
• Capable of supplying DC 12 V to the antenna preamplifier
• The die-cast housing for effective shielding
The MA050L building amplifier is designed for small and medium-sized RTV installations. The amplification in the FM/VHFIII bands is 30 dB, in the UHF band it is 34 dB.
• Built-in cable pre-correction
• Integrated LTE attenuation filter
• 30 dB gain in FM, BIII band and 34 dB gain in UHF band
• On/Off switch allowing 12 volts and 60 mA current to be sent to the antenna preamplifier
• Open housing provides high efficiency shielding to prevent interfering signals from penetrating inside the unit
• Integrated LTE attenuation filter
• 30 dB gain in FM, BIII band and 34 dB gain in UHF band
• On/Off switch allowing 12 volts and 60 mA current to be sent to the antenna preamplifier
• Open housing provides high efficiency shielding to prevent interfering signals from penetrating inside the unit
House amplifier used in SMATV and cable systems with return channel.
• Building amplifier
• Dedicated to cable installations
• Frequency range: 5...65 MHz/87...862 MHz
• Push-pull output stage, made of gallium arsenide GaAs
• Characteristics corrector on input of feedforward and return channel
• Outside housing
• Amplification of 40 dB (forward channel) and -5/27 dB (return channel)
• Dedicated to cable installations
• Frequency range: 5...65 MHz/87...862 MHz
• Push-pull output stage, made of gallium arsenide GaAs
• Characteristics corrector on input of feedforward and return channel
• Outside housing
• Amplification of 40 dB (forward channel) and -5/27 dB (return channel)
House amplifier used in SMATV and cable systems with return channel.
• House amplifier
• Dedicated to cable systems
• Frequency range: 5...65 MHz/87...1218 MHz
• Push-pull output stage, made of gallium arsenide GaAs
• Waveform correction filter at input of the transmission and return channel
• Die-cast housing
• Gain of 40 dB (transmission channel) and -5/27 dB (return channel)
• Dedicated to cable systems
• Frequency range: 5...65 MHz/87...1218 MHz
• Push-pull output stage, made of gallium arsenide GaAs
• Waveform correction filter at input of the transmission and return channel
• Die-cast housing
• Gain of 40 dB (transmission channel) and -5/27 dB (return channel)
HA024 building amplifier for use in small and medium-sized RTV installations. Built-in gain switch 18...20/27...30 dB.
• Ideal for amplification of DVB-T and cable TV signals
• Maximum gain 30 dB
• Attenuation correction - recommended for long antenna cable lengths
• Double gain control
• Maximum output signal level 97 dBμV
• Maximum gain 30 dB
• Attenuation correction - recommended for long antenna cable lengths
• Double gain control
• Maximum output signal level 97 dBμV
HA-126 building amplifier (1 in/1 out) for use in community antenna installations to compensate for attenuation of RTV signals. Gain 34 dB.
• Broadband amplifier
• Maximum gain 34 dB
• One of the most popular amplifiers on the market
• Maximum output signal level 117 dBμV
• Gain control within 20 dB
• Cable attenuation correction in the range of 18 dB
• Maximum gain 34 dB
• One of the most popular amplifiers on the market
• Maximum output signal level 117 dBμV
• Gain control within 20 dB
• Cable attenuation correction in the range of 18 dB
HA-131L amplifier with LTE filter for large RTV installations. It is characterised by a high gain of 36 dB.
• High power amplifier designed for TV installations
• 36 dB amplification
• Maximum output level 122 dBμV
• Built-in LTE filter - suppression of unwanted signals above 791 MHz
• Smooth gain adjustment
• Smooth slope adjustment for gain characteristics
• Open housing
• 36 dB amplification
• Maximum output level 122 dBμV
• Built-in LTE filter - suppression of unwanted signals above 791 MHz
• Smooth gain adjustment
• Smooth slope adjustment for gain characteristics
• Open housing
The HA-210 amplifier for large radio frequency installations. It is characterised by a high gain of 36 dB.
• Zero-band TV amplifier
• Open housing for highest screening efficiency
• High gain - up to 36 dB
• 20 dB gain adjustment
• Maximum output signal level 107 dBμV
• Cable attenuation correction 20 dB
• Test input and output
• Open housing for highest screening efficiency
• High gain - up to 36 dB
• 20 dB gain adjustment
• Maximum output signal level 107 dBμV
• Cable attenuation correction 20 dB
• Test input and output
MA-049L building amplifier with LTE filter. The gain in the FM and BIII bands is 30 dB, while in the UHF band it is 34 dB.
• Integrated LTE attenuation filter
• 30 dB gain in the FM, BIII band and 34 dB gain in the UHF band
• On/Off switch allowing 12 V and 60 mA current to be sent to the antenna preamplifier
• Open housing provides high efficiency shielding to prevent interfering signals from penetrating inside the unit
• 30 dB gain in the FM, BIII band and 34 dB gain in the UHF band
• On/Off switch allowing 12 V and 60 mA current to be sent to the antenna preamplifier
• Open housing provides high efficiency shielding to prevent interfering signals from penetrating inside the unit
The MA075L R82330 house amplifier with an LTE filter is used for FM and TV systems, ensuring gain up to 35 dB (in the FM and VHFIII bands) and 47 dB (in the UHF band).
• Integrated LTE filter
• 35 dB gain in FM and VHFIII bands, and 47 dB gain in UHF band
• On-off switch to divert power supply voltage 12 VDC at 100 mA to an optional preamp in the UHF path
• Die-cast housing for high screening efficiency, preventing the external interference from reaching the device
• 35 dB gain in FM and VHFIII bands, and 47 dB gain in UHF band
• On-off switch to divert power supply voltage 12 VDC at 100 mA to an optional preamp in the UHF path
• Die-cast housing for high screening efficiency, preventing the external interference from reaching the device
The MA076L building amplifier with LTE filter is used in RTV installations. The amplification in the FM and VHFIII bands is 35 dB, while in the 2xUHF band it is 47 dB.
• Integrated LTE filter
• 35 dB gain in FM and VHFIII bands, and 47 dB gain in UHF band
• Switch connecting supply voltage (12 VDC, max. 100 mA) to optional preamplifier in the UHF path
• Die-cast housing with high screening efficiency, blocking external interference signals
• 35 dB gain in FM and VHFIII bands, and 47 dB gain in UHF band
• Switch connecting supply voltage (12 VDC, max. 100 mA) to optional preamplifier in the UHF path
• Die-cast housing with high screening efficiency, blocking external interference signals
