The antenna socket - antenna socket adapter (i.e. female connector - female connector) is used to connect two antenna cables with male plugs.
• Antenna IEC socket - IEC socket
The monolithic F connector is made of nickel-plated brass and is designed for TRISET 302 B2ca, Dca, Fca cables.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating band
• Very low attenuation in the entire operating band
• Tightness from the device side is ensured by a rubber gasket
• Tight from the cable side
• Dimensionally matched to the TRISET 302 B2ca, Dca, Fca cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating band
• Very low attenuation in the entire operating band
• Tightness from the device side is ensured by a rubber gasket
• Tight from the cable side
• Dimensionally matched to the TRISET 302 B2ca, Dca, Fca cable family
The monolithic F connector is made of nickel-plated brass and is designed for TRISET 302 Eca cables.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating band
• Very low attenuation in the entire operating band
• Tightness from the device side is ensured by a rubber gasket
• Tight from the cable side
• Dimensionally matched to the TRISET 302 Eca cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating band
• Very low attenuation in the entire operating band
• Tightness from the device side is ensured by a rubber gasket
• Tight from the cable side
• Dimensionally matched to the TRISET 302 Eca cable family
BNC connector designed for H155 coaxial cable with an impedance of 50 Ω.
• For H155 cable
• Impedance 50 ohms
• Impedance 50 ohms
Twist-on 7.2 mm F-connector made of nickel-plated copper. It is fully resistant to corrosion and can be used for both, indoor and outdoor installation.
• Twist-on 7.2 mm F-connector
• Made of nickel-plated copper
• Tool-free
• 100 pcs. package
• Made of nickel-plated copper
• Tool-free
• 100 pcs. package
The Keystone HDMI connector allows two plug-ended HDMI cables to be connected together.
• Connector type: HDMI
The Keystone F/IEC adapter allows to connect two coaxial cables terminated with F and IEC plugs.
• Connector type: F
Rubber seal protecting F-type connector against harmful weather conditions.
• Material: rubber
• Length: 50 mm
• Length: 50 mm
Common F socket - F plug "fast" connector.
• F-plug to F-socket transition
• Fast" plug type - no need to screw the nut on the socket
• Fast" plug type - no need to screw the nut on the socket
F connector made of nickel-plated copper. It is completely corrosion-resistant and can therefore be used for both indoor and outdoor installation.
• Connector type: F crimped
• Diameter: 5.5 mm
• Material: nickel-plated copper
• Mounting requires a crimping tool
• Designed for cables of class RG-59
• Diameter: 5.5 mm
• Material: nickel-plated copper
• Mounting requires a crimping tool
• Designed for cables of class RG-59



