Angled connector F-socket - antenna connector.
• F-socket to IEC antenna connector
• Type: angled
• Type: angled
Angled connector F-socket - aerial socket.
• F-socket to IEC antenna socket
• Type: angled
• Type: angled
Keystone connector with two BNC sockets. Allows two sections of coaxial cable, terminated with BNC connectors on both sides, to be connected together.
• Connector type: BNC
Keystone module with F-f to F-f adapter, to connect two cables terminated with F plugs.
• Connector type: F
The monolithic nickel-plated brass F-connector is designed for Triset-11 PE cables.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the TRISET-11 / RG-11 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the TRISET-11 / RG-11 cable family
The monolithic nickel-plated brass F-connector is designed for RG-6 Tri-Shield cables.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the RG-6 Tri-Shield cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the RG-6 Tri-Shield cable family
The monolithic, nickel-plated brass F-connector is designed for RG-59 type cables.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the RG-59 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the RG-59 cable family
Monolithic, made of nickel-plated brass, the 90 F 113 angle connector (screw-on) is designed for TRISET cables.
• Connector type: F compression, angled
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the Triset-113 family of cables
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the Triset-113 family of cables
Monolithic, made of nickel-plated brass, the 90 QF 113 angle compression connector is designed for TRISET cables.
• Connector type: F compression, angled, 'quick'
• Does not need to be screwed onto a threaded socket
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the Triset-113 family of cables
• Does not need to be screwed onto a threaded socket
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the Triset-113 family of cables
The monolithic angle compression connector, made of nickel-plated brass, is designed for RG-6 type cables.
• Connector type: BNC compression, angled
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the RG-6 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the RG-6 cable family



