EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
The antenna socket - antenna socket adapter (i.e. female connector - female connector) is used to connect two antenna cables with male plugs.
• Antenna IEC socket - IEC socket
The monolithic F connector is made of nickel-plated brass and is designed for TRISET 302 B2ca, Dca, Fca cables.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating band
• Very low attenuation in the entire operating band
• Tightness from the device side is ensured by a rubber gasket
• Tight from the cable side
• Dimensionally matched to the TRISET 302 B2ca, Dca, Fca cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating band
• Very low attenuation in the entire operating band
• Tightness from the device side is ensured by a rubber gasket
• Tight from the cable side
• Dimensionally matched to the TRISET 302 B2ca, Dca, Fca cable family
The monolithic F connector is made of nickel-plated brass and is designed for TRISET 302 Eca cables.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating band
• Very low attenuation in the entire operating band
• Tightness from the device side is ensured by a rubber gasket
• Tight from the cable side
• Dimensionally matched to the TRISET 302 Eca cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating band
• Very low attenuation in the entire operating band
• Tightness from the device side is ensured by a rubber gasket
• Tight from the cable side
• Dimensionally matched to the TRISET 302 Eca cable family
BNC connector designed for H155 coaxial cable with an impedance of 50 Ω.
• For H155 cable
• Impedance 50 ohms
• Impedance 50 ohms
![F-connector: 7.2 mm twist-on, with a seal [100 pcs.]](https://www.dipol.com.pl/img/thumbnails/e8014+.jpg/67e16a68f4e1a1841ed42ddd7687a4e6.jpg)
Twist-on 7.2 mm F-connector made of nickel-plated copper. It is fully resistant to corrosion and can be used for both, indoor and outdoor installation.
• Twist-on 7.2 mm F-connector
• Made of nickel-plated copper
• Tool-free
• 100 pcs. package
• Made of nickel-plated copper
• Tool-free
• 100 pcs. package
The Keystone HDMI connector allows two plug-ended HDMI cables to be connected together.
• Connector type: HDMI
The Keystone F/IEC adapter allows to connect two coaxial cables terminated with F and IEC plugs.
• Connector type: F
Rubber seal protecting F-type connector against harmful weather conditions.
• Material: rubber
• Length: 50 mm
• Length: 50 mm
Common F socket - F plug "fast" connector.
• F-plug to F-socket transition
• Fast" plug type - no need to screw the nut on the socket
• Fast" plug type - no need to screw the nut on the socket
F connector made of nickel-plated copper. It is completely corrosion-resistant and can therefore be used for both indoor and outdoor installation.
• Connector type: F crimped
• Diameter: 5.5 mm
• Material: nickel-plated copper
• Mounting requires a crimping tool
• Designed for cables of class RG-59
• Diameter: 5.5 mm
• Material: nickel-plated copper
• Mounting requires a crimping tool
• Designed for cables of class RG-59
Angled connector F-socket - antenna connector.
• F-socket to IEC antenna connector
• Type: angled
• Type: angled
Angled connector F-socket - aerial socket.
• F-socket to IEC antenna socket
• Type: angled
• Type: angled
Keystone connector with two BNC sockets. Allows two sections of coaxial cable, terminated with BNC connectors on both sides, to be connected together.
• Connector type: BNC
Keystone module with F-f to F-f adapter, to connect two cables terminated with F plugs.
• Connector type: F
The monolithic nickel-plated brass F-connector is designed for Triset-11 PE cables.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the TRISET-11 / RG-11 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the TRISET-11 / RG-11 cable family
The monolithic nickel-plated brass F-connector is designed for RG-6 Tri-Shield cables.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the RG-6 Tri-Shield cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the RG-6 Tri-Shield cable family
The monolithic, nickel-plated brass F-connector is designed for RG-59 type cables.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the RG-59 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the RG-59 cable family
Monolithic, made of nickel-plated brass, the 90 F 113 angle connector (screw-on) is designed for TRISET cables.
• Connector type: F compression, angled
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the Triset-113 family of cables
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the Triset-113 family of cables
Monolithic, made of nickel-plated brass, the 90 QF 113 angle compression connector is designed for TRISET cables.
• Connector type: F compression, angled, 'quick'
• Does not need to be screwed onto a threaded socket
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the Triset-113 family of cables
• Does not need to be screwed onto a threaded socket
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the Triset-113 family of cables
The monolithic angle compression connector, made of nickel-plated brass, is designed for RG-6 type cables.
• Connector type: BNC compression, angled
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the RG-6 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the RG-6 cable family
The monolithic angle compression connector, made of nickel-plated brass, is designed for RG-59 type cables.
• Connector type: BNC compression, angled
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the RG-59 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the RG-59 cable family
90 F IEC 113 MASTER compression angle socket for TRISET-113 cable.
• Connector type: IEC female angled
• Impedance: 75 Ω
• Material: brass 360
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
• Impedance: 75 Ω
• Material: brass 360
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
90 F IEC 113 MASTER compression angle connector for TRISET-113 cable.
• Connector type: IEC male angled
• Impedance: 75 Ω
• Material: brass 360
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
• Impedance: 75 Ω
• Material: brass 360
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
The monolithic F-connector, made of nickel-plated brass, is designed for RG-6 type cables.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the RG-6 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the RG-6 cable family
The monolithic nickel-plated brass F-connector is designed for TRISET cables.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to TRISET-113 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to TRISET-113 cable family
The monolithic nickel-plated brass BNC connector is designed for RG-59/CAMSET cables.
• Connector type: BNC compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the RG-59 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the RG-59 cable family
The monolithic nickel-plated brass BNC connector is designed for RG-6 cables.
• Connector type: BNC compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the RG-6 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the RG-6 cable family
The monolithic nickel-plated brass BNC connector is designed for TRISET cables.
• Connector type: BNC compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
Cabelcon IEC angle socket for RG-6/Triset-113 cable. Patented design, based on "Self-Install" technology.
• Easy to install
• Frequency response up to 3 GHz
• Shielding class A
• No tools required
• Reusable
• Fits cables with a dielectric diameter of 4.9 - 5.1 mm
• Frequency response up to 3 GHz
• Shielding class A
• No tools required
• Reusable
• Fits cables with a dielectric diameter of 4.9 - 5.1 mm
Cabelcon IEC angle connector for RG-6/Triset-113 cable. Patented design, based on "Self-Install" technology.
• Easy to install
• Frequency response up to 3 GHz
• Shielding class A
• No tools required
• Reusable
• Fits cables with a dielectric diameter of 4.9 - 5.1 mm
• Frequency response up to 3 GHz
• Shielding class A
• No tools required
• Reusable
• Fits cables with a dielectric diameter of 4.9 - 5.1 mm
