TV/SAT, Connectors

To cart Preview

Antenna Plug (IEC): Cabelcon (angular, RG-6/Triset-113, "Self-Install")

Cabelcon IEC angle connector for RG-6/Triset-113 cable. Patented design, based on "Self-Install" technology.

• Easy to install
• Frequency response up to 3 GHz
• Shielding class A
• No tools required
• Reusable
• Fits cables with a dielectric diameter of 4.9 - 5.1 mm

Code: E3001

€2.47

Available

To cart Preview

Antenna Plug (IEC): Cabelcon (RG-6/Triset-113, "Self-Install")

Cabelcon IEC connector for RG-6/Triset-113 cable. Patented design, based on "Self-Install" technology.

• Easy to install
• Frequency response up to 3 GHz
• Shielding class A
• No tools required
• Reusable
• Fits cables with a dielectric diameter of 4.9 - 5.1 mm

Code: E3002

€1.13

Available

To cart Preview

Antenna Socket (IEC): Cabelcon (RG-6/Triset-113, "Self-Install")

Cabelcon IEC socket for RG-6/Triset-113 cable. Patented design, based on "Self-Install" technology.

• Easy to install
• Frequency response up to 3 GHz
• Shielding class A
• No tools required
• Reusable
• Fits cables with a dielectric diameter of 4.9 - 5.1 mm

Code: E3003

€1.26

Available

To cart Preview

Antenna Socket (IEC): Cabelcon (angular, RG-6/Triset-113, "Self-Install")

Cabelcon IEC angle socket for RG-6/Triset-113 cable. Patented design, based on "Self-Install" technology.

• Easy to install
• Frequency response up to 3 GHz
• Shielding class A
• No tools required
• Reusable
• Fits cables with a dielectric diameter of 4.9 - 5.1 mm

Code: E3004

€2.68

Available

To cart Preview

Compression Antenna Plug (IEC): MASTER M IEC 113 (for TRISET-113)

M IEC 113 MASTER compression connector for Triset-113 cable.

• Connector type: IEC male
• Impedance: 75 Ω
• Material: brass 360
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables

Code: E3005

€0.50

Available

To cart Preview

Compression Antenna Socket (IEC-f): MASTER IEC 113 (for TRISET-113)

IEC 113 MASTER compression F socket for Triset-113 cable.

• Connector type: IEC female
• Impedance: 75 Ω
• Material: brass 360
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables

Code: E3006

€0.56

Available

To cart Preview

Compression Female Connector MASTER 90 F IEC 113 (angular, for Triset-113)

90 F IEC 113 MASTER compression angle socket for TRISET-113 cable.

• Connector type: IEC female angled
• Impedance: 75 Ω
• Material: brass 360
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables

Code: E3007

€0.87

Available

To cart Preview

Compression Male Connector 90 F IEC 113 MASTER (angular, for Triset-113)

90 F IEC 113 MASTER compression angle connector for TRISET-113 cable.

• Connector type: IEC male angled
• Impedance: 75 Ω
• Material: brass 360
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables

Code: E3008

€0.80

Available

Preview

Antenna Coaxial Plug WAR

Typical IEC television plug, e.g. for a television receiver.

• Connector type: IEC male
• Fits to TRISET-113 and RG-6 DIPOLNET cable family

Code: E3010

€0.14

Temporarily unavailable

Preview

Antenna Coaxial Socket Contact NAR (female connector)

Typical IEC TV socket.

• Connector type: IEC female
• Fits to TRISET-113 and RG-6 DIPOLNET cable family

Code: E3110

€0.14

Temporarily unavailable

To cart Preview

Coaxial Cable Connector

It is used to connect coaxial cable in domestic installations.

• Easy way to connect two coaxial cables
• No need for plugs on the cables
• Material: plastic

Code: E3205

€0.24

Available

To cart Preview

BNC / RCA Adapter

Reduction of male BNC to female RCA.

• Conversion of BNC plug into RCA socket

Code: E5105

€0.52

Available

To cart Preview

RCA-male to BNC-male Adapter

The RCA-BNC adapter is used e.g. for connecting the AUDIO output of a DVR (BNC) to an audio amplifier etc. with RCA input, via a typical RCA-RCA patch cable.

• RCA to BNC plug transition

Code: E5109

€0.46

Available

To cart Preview

RCA-male to BNC-female Adapter

This adapter is used in audio channels, e.g. to connect AUDIO output of a DVR (BNC), via a coaxial cable, to an audio amplifier with RCA input.

• RCA connector to BNC socket

Code: E5110

€0.50

Available

To cart Preview

F-connector: 6.8 mm twist-on [100 pcs.]

F connector made of nickel-plated copper. It is fully corrosion-proof, and can be used it both, indoors and outdoors.

• Connector type: F twist-on
• Diameter: 6.8 mm
• Material: nickel-plated copper
• No crimping required
• Dedicated to RG-6 class cables
• Package 100 pcs.

Code: E8012

€11.00

Available

To cart Preview

F-connector: 6.8 mm twist-on

F connector made of nickel-plated copper. It is fully corrosion-proof, and can be used it both, indoors and outdoors.

• Connector type: F twist-on
• Diameter: 6.8 mm
• Material: nickel-plated copper
• No crimping required
• Dedicated to RG-6 class cables

Code: E8013

€0.13

Available

To cart Preview

F-connector: 7.2 mm twist-on, with a seal [100 pcs.]

Twist-on 7.2 mm F-connector made of nickel-plated copper. It is fully resistant to corrosion and can be used for both, indoor and outdoor installation.

• Twist-on 7.2 mm F-connector
• Made of nickel-plated copper
• Tool-free
• 100 pcs. package

Code: E8014

€12.48

Available

To cart Preview

F-connector: 7.2 mm twist-on, with a seal

Twist-on 7.2 mm F-connector made of nickel-plated copper. It is fully resistant to corrosion and can be used both, for indoor and outdoor installation.

• Twist-on 7.2 mm F-connector
• Made of nickel-plated copper
• Tool-free

Code: E8016

€0.16

Available

To cart Preview

F-connector: 5.8 mm, twisted-on, iron [100 pcs.]

F-connector 5.8 mm, twisted-on, made of iron.

• Connector type: F screw-on
• Diameter: 5.8 mm
• Material: steel
• Installation does not require a crimping tool
• Designed for cables of RG-59 class
• Pack of 100 pcs.

Code: E8020

€11.43

Available

To cart Preview

F-connector: 5.8 mm (twisted-on, iron)

• Connector type: F screw-on
• Diameter: 5.8 mm
• Material: steel
• Installation does not require a crimping tool
• Designed for cables of RG-59 class

Code: E8021

€0.16

Available

To cart Preview

Rubber Seal for F-connectors

Rubber seal protecting F-type connector against harmful weather conditions.

• Material: rubber
• Length: 50 mm

Code: E8023

€0.13

Available

Preview

F-connector crimped on RG-11 cable

F connector crimped onto Triset-11/RG-11 cable.

• Connector type: F crimped
• Diameter: 10 mm
• Material: nickel-plated copper
• Installation requires a crimping tool
• Dedicated to cables of class TRISET-11 / RG-11

Code: E8024

€1.48

Temporarily unavailable

To cart Preview

Rubber Seal for F-connectors

Rubber seal to protect the plugs from the harmful weather conditions.

• Material: rubber
• Length: 50 mm

Code: E8025

€0.25

Available

To cart Preview

F-connector 5.5 mm (crimped)

F connector made of nickel-plated copper. It is completely corrosion-resistant and can therefore be used for both indoor and outdoor installation.

• Connector type: F crimped
• Diameter: 5.5 mm
• Material: nickel-plated copper
• Mounting requires a crimping tool
• Designed for cables of class RG-59

Code: E80261

€0.17

Available

To cart Preview

F-connector 6.5 mm (crimped)

F connector made of nickel-plated copper. It is completely corrosion-resistant and can therefore be used for both indoor and outdoor installation.

• Connector type: F crimped
• Diameter: 6.5 mm
• Material: nickel-plated copper
• Mounting requires a crimping tool
• Designed for cables of RG-6 class

Code: E80271

€0.25

Available

To cart Preview

F-connector crimped 6.5 mm Tratec

F connector made of nickel-plated copper. It is completely corrosion-resistant and can therefore be used for both indoor and outdoor installation.

• Connector type: F crimped
• Diameter: 6.5 mm
• Material: nickel-plated copper
• Mounting requires a crimping tool
• Designed for cables of RG-6 class

Code: E80273

€0.43

Available

To cart Preview

Professional F-connector: Platinum (on TRISET-113)

Top quality F-connector, designed to be crimped onto TRISET-113/Tri-shield DIPOLNET cable.

• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Tightness on the device side is ensured by a rubber seal
• Dimensionally matched to the TRISET-113 and RG-6 cable family

Code: E80274

€0.38

Available

To cart Preview

Professional F-connector: Platinum (for TRISET-11)

High quality F-connector for use on TRISET-11 coax

• Type of connector: F compression
• Impedance: 75 Ω
• Material: industrial nickel plated
• Assembly method: PCB compression
• Wide operating bandwidth
• Very low attenuation across the entire operating band
• Tightness on the device side is ensured by a rubber gasket
• Dimensionally advanced to the TRISET-11 / RG-11 cable family

Code: E80275

€2.13

Available

To cart Preview

F 302 Eca MASTER compression connector for TRISET 302 Eca cable

The monolithic F connector is made of nickel-plated brass and is designed for TRISET 302 Eca cables.

• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating band
• Very low attenuation in the entire operating band
• Tightness from the device side is ensured by a rubber gasket
• Tight from the cable side
• Dimensionally matched to the TRISET 302 Eca cable family

Code: E80310

€0.38

Available

To cart Preview

Compression connector F 302 B2ca, Dca, Fca MASTER for TRISET 302 B2ca, Dca, Fca cable

The monolithic F connector is made of nickel-plated brass and is designed for TRISET 302 B2ca, Dca, Fca cables.

• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating band
• Very low attenuation in the entire operating band
• Tightness from the device side is ensured by a rubber gasket
• Tight from the cable side
• Dimensionally matched to the TRISET 302 B2ca, Dca, Fca cable family

Code: E80312

€0.38

Available

To cart Preview

F-connector MASTER F 59 (compressed on CAMSET/RG-59)

The monolithic, nickel-plated brass F-connector is designed for RG-59 type cables.

• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the RG-59 cable family

Code: E80322

€0.38

Available

To cart Preview

F-connector MASTER F 6 (compressed on RG-6)

The monolithic F-connector, made of nickel-plated brass, is designed for RG-6 type cables.

• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the RG-6 cable family

Code: E80332

€0.38

Available

To cart Preview

F-connector MASTER F 113 (compressed on Triset-113)

The monolithic nickel-plated brass F-connector is designed for TRISET cables.

• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to TRISET-113 cable family

Code: E80342

€0.38

Available

To cart Preview

F-connector MASTER F (compressed on RG-6 Tri-Shield, TRISET PLUS)

The monolithic nickel-plated brass F-connector is designed for RG-6 Tri-Shield cables.

• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the RG-6 Tri-Shield cable family

Code: E80345

€0.38

Available

To cart Preview

Male F-connector MASTER 90 F 113 (angular, compressed on Triset-113)

Monolithic, made of nickel-plated brass, the 90 F 113 angle connector (screw-on) is designed for TRISET cables.

• Connector type: F compression, angled
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the Triset-113 family of cables

Code: E80348

€0.91

Available

To cart Preview

Fast F-connector MASTER 90 QF 113 (angular, compressed on Triset-113)

Monolithic, made of nickel-plated brass, the 90 QF 113 angle compression connector is designed for TRISET cables.

• Connector type: F compression, angled, 'quick'
• Does not need to be screwed onto a threaded socket
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the Triset-113 family of cables

Code: E80350

€0.97

Available

To cart Preview

F-connector F MASTER 11 (compressed on Triset-11)

The monolithic nickel-plated brass F-connector is designed for Triset-11 PE cables.

• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the TRISET-11 / RG-11 cable family

Code: E80362

€0.97

Available

To cart Preview

Professional F-female to F-female adapter

The professional socket F - socket F - gold collection transition is designed for making professional connections between coaxial cables.

• Material: nickel-plated brass
• Connector is SCETE compliant
• Unique patented contact with cable core
• Very low attenuation
• Precision thread

Code: E80380

€0.35

Available

To cart Preview

F-plug: Cabelcon (for RG-6/Triset-113, "Self-Install")

The F-plug from Danish company Cabelcon is designed for home and community antenna installations. Patented construction based on the "Self-Install" technology.

• Unique cable mounting system
• Frequency response up to 3 GHz
• Shielding class A
• No tools required
• Fits cables with a dielectric diameter of 5.1 mm

Code: E80410

€0.64

Available

To cart Preview

F-female to F-female adapter

A connector designed for making connections between coaxial cables.

• F-socket - F-socket "barrel" type transition
• Permits the extension of the RTV cable terminated with an F plug

Code: E8230

€0.19

Available

To cart Preview

F-female to F-female adapter (wall-mounted)

F-socket to F-socket transition for wall mounting to connect two coaxial cables terminated with an F-connector.

• F-socket - F-socket "barrel" type transition
• Permits extension of RTV cable terminated with an F plug
• Can be mounted on a wall or other flat surface

Code: E8237

€1.50

Available

To cart Preview

F-socket - F-socket double passage for wall mounting

F-socket - F-socket double wall-mounted transition for the connection of coaxial cables terminated with F-connectors.

• F-socket - F-socket "barrel" type transition
• Double
• Allows for extension of the RTV cable ended with the F plug
• Can be mounted on a wall or other flat surface

Code: E8239

€2.50

Available

To cart Preview

F-male to F-male adapter

F-plug - F-plug screw-on connector

• F-plug to F-plug transition
• Plug version with nut

Code: E8240

€0.32

Available

To cart Preview

F-male to F-male adapter, "quick"

F-plug - F-plug connector.

• F-plug to F-plug transition
• Fast" type plugs - no need to screw the nut on the socket

Code: E8242

€0.39

Available

To cart Preview

F-type Right Angle Adapter

Angled connector. F regular socket - F screw-on connector.

• F plug - F socket connection
• Type: angled
• Plug version with nut

Code: E8244

€0.48

Available

To cart Preview

F-female to quick F-male adapter (angular)

Angled connector. Regular F-socket - F-plug "fast".

• F plug - F socket connection
• Type: angled
• Fast" plug type - no need to screw the nut on the socket

Code: E8245

€0.61

Available

To cart Preview

F-female to quick F-male adapter (straight)

Common F socket - F plug "fast" connector.

• F-plug to F-socket transition
• Fast" plug type - no need to screw the nut on the socket

Code: E8247

€0.51

Available

To cart Preview

F-f to IEC Angular Antenna Socket Adapter

Angled connector F-socket - aerial socket.

• F-socket to IEC antenna socket
• Type: angled

Code: E8250

€0.57

Available

To cart Preview

F-f to IEC Antenna Plug Adapter

Angled connector F-socket - antenna connector.

• F-socket to IEC antenna connector
• Type: angled

Code: E8252

€0.53

Available

To cart Preview

F-type socket - antenna plug (IEC) adapter

F socket connector - antenna plug.

• F-socket to IEC antenna connector

Code: E8260

€0.51

Available

To cart Preview

F-type plug - antenna socket (IEC) adapter

F connector - aerial socket.

• F-plug to IEC antenna connector
• F-plug version with nut

Code: E8270

€0.42

Available

To cart Preview

F-type plug - antenna plug (IEC) adapter

F connector - antenna connector.

• F-plug to IEC antenna connector
• F-plug version with nut

Code: E8272

€0.65

Available

To cart Preview

Antenna connector TV/IEC female - TV/IEC female

The antenna socket - antenna socket adapter (i.e. female connector - female connector) is used to connect two antenna cables with male plugs.

• Antenna IEC socket - IEC socket

Code: E8273

€0.54

Available

To cart Preview

BNC Connector MASTER BNC 59 (compressed on CAMSET/RG-59)

The monolithic nickel-plated brass BNC connector is designed for RG-59/CAMSET cables.

• Connector type: BNC compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the RG-59 cable family

Code: E8275

€0.87

Available

To cart Preview

BNC Connector MASTER BNC 6 (compressed on RG-6)

The monolithic nickel-plated brass BNC connector is designed for RG-6 cables.

• Connector type: BNC compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the RG-6 cable family

Code: E8276

€0.89

Available

To cart Preview

BNC Connector MASTER BNC 113 (compressed on Triset-113)

The monolithic nickel-plated brass BNC connector is designed for TRISET cables.

• Connector type: BNC compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables

Code: E8277

€0.89

Available

To cart Preview

Angular BNC Connector MASTER BNC 59 (compressed on CAMSET/RG-59)

The monolithic angle compression connector, made of nickel-plated brass, is designed for RG-59 type cables.

• Connector type: BNC compression, angled
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the RG-59 cable family

Code: E8278

€1.15

Available

To cart Preview

Angular BNC Connector MASTER BNC 6 (compressed on RG-6)

The monolithic angle compression connector, made of nickel-plated brass, is designed for RG-6 type cables.

• Connector type: BNC compression, angled
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the RG-6 cable family

Code: E8279

€1.10

Available

To cart Preview

F-type socket - antenna socket (IEC) adapter

F socket connector - antenna socket.

• F socket - IEC antenna socket transition

Code: E8280

€0.28

Available

To cart Preview

F-female to BNC-male adapter

F socket to BNC connector. Carefully selected materials, excellent manufacturing accuracy ensure fast and secure assembly (no connection clearances).

• F-socket to BNC connector
• Material: nickel-plated brass
• Contact pin: gold-plated brass

Code: E8284

€0.72

Available

To cart Preview

F-socket - RCA plug adapter

F socket connector - RCA plug.

• F-socket to RCA connector

Code: E8287

€0.40

Available

To cart Preview

BNC 75 plug crimped for RG-59 cable

BNC 75 plug crimped for RG-59.

• Connector type: BNC crimped
• Crimping tool required

Code: E8290

€0.89

Available

To cart Preview

BNC 75 plug crimped for RG-6 cable

BNC 75 plug crimped suitable for the RG-6 cable.

• It allows you to terminate an RG-6 cable with a BNC plug
• It requires the use of a crimping tool

Code: E8291

€0.90

Available

To cart Preview

BNC 50 connector crimped on H155

BNC connector designed for H155 coaxial cable with an impedance of 50 Ω.

• For H155 cable
• Impedance 50 ohms

Code: E8292

€1.15

Available

To cart Preview

BNC socket – BNC socket adapter

The BNC socket to BNC socket adapter enables the connection of two plugs of this type.

• It allows you to connect two BNC plugs

Code: E8297

€0.67

Available

To cart Preview

BNC socket - F socket adapter

BNC socket to F socket adapter.

• Provides transition from BNC socket to F socket

Code: E8298

€0.74

Available

To cart Preview

Keystone F/IEC Module: LogiLink NK0020

The Keystone F/IEC adapter allows to connect two coaxial cables terminated with F and IEC plugs.

• Connector type: F

Code: J2311

€1.40

Available

To cart Preview

Keystone F / F Module

Keystone module with F-f to F-f adapter, to connect two cables terminated with F plugs.

• Connector type: F

Code: J2312

€0.59

Available

To cart Preview

Keystone BNC (f) / BNC (f) Module

Keystone connector with two BNC sockets. Allows two sections of coaxial cable, terminated with BNC connectors on both sides, to be connected together.

• Connector type: BNC

Code: J2313

€1.72