EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network.
• Transmission via a single Cat. 5e/6 cable
• Minimised data stream in the network
• UDP/IP protocol (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• Maximum length of cable: 100 meters
• Minimised data stream in the network
• UDP/IP protocol (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• Maximum length of cable: 100 meters
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network.
• Transmission via a single Cat. 5e/6 cable
• Low data stream load to the network
• UDP/IP transmission (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• Maximum cable length: 100 meters
• Low data stream load to the network
• UDP/IP transmission (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• Maximum cable length: 100 meters
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network. USB extender.
• HDMI transmission using a single cable cat. 5e/6
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 1080p
• Maximum cable length 100 m
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 1080p
• Maximum cable length 100 m
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network. USB extender.
• HDMI transmission using a single cable cat. 5e/6
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 1080p
• Maximum cable length 100 m
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 1080p
• Maximum cable length 100 m
The Signal H3644 HDMI converter enables HDMI signals to be transmitted over long distances using Category 6 or higher twisted-pair cables.
• Transmission via a single Cat. 5/5e/6 6/6A/7 cable
• Transmission speed up to 18 Gbps
• Image type 4K x 2K 60 Hz
• No delays
• Support for DTS, Dolby
• Support for Audio Return Channel (ARC) and S/PDIF
• Bidirectional IR remote control extender
• Transmission speed up to 18 Gbps
• Image type 4K x 2K 60 Hz
• No delays
• Support for DTS, Dolby
• Support for Audio Return Channel (ARC) and S/PDIF
• Bidirectional IR remote control extender
The Etrix GR-24K HDMI Grabber captures video and audio from the HDMI output, converting it into a USB signal seen as a camera on the system.
• HDMI signal capture up to 1080p@60fps
• Low latency ideal for configuring DVRs and rack-mounted devices.
• Plug & Play without installing drivers
• Works with OBS, VLC and other recording software
• USB-C connector for smartphone viewing
• Aluminium casing for effective heat dissipation
• Stable operation without jams or frame loss
• Low latency ideal for configuring DVRs and rack-mounted devices.
• Plug & Play without installing drivers
• Works with OBS, VLC and other recording software
• USB-C connector for smartphone viewing
• Aluminium casing for effective heat dissipation
• Stable operation without jams or frame loss
Signal HD's 3x1 Maki HDMI switch enables 3 high definition (HD) devices to be connected to a TV set equipped with an HDMI connector.
• Connection of 3 sources of high-definition signals to one HDMI input
• Support for HDMI 2.0
• Support for 4K x 2K resolution
• Support for 3D
• Remote control
• Support for HDMI 2.0
• Support for 4K x 2K resolution
• Support for 3D
• Remote control
Signal HD's HDMI 1x2 splitter allows HDMI signals to be distributed to two TV sets simultaneously.
• Signal distribution to 2 TVs
• Supports HDMI 2.0 standard
• Supports 4Kx2K 60 Hz resolution
• Supports DTS Digital, Dolby Digital, DTS-HD audio compression
• Supports HDMI 2.0 standard
• Supports 4Kx2K 60 Hz resolution
• Supports DTS Digital, Dolby Digital, DTS-HD audio compression
The HDMI 1x4 splitter makes it possible to distribute the HDMI signal to four TV sets at the same time. In addition, the device supports EDID functions.
• Signal distribution to 4 TVs
• EDID function
• Supports HDMI 2.0 standard
• Supports 4Kx2K 60 Hz resolution
• Supports DTS Digital, Dolby Digital, DTS-HD, Dolby True HD audio compression
• EDID function
• Supports HDMI 2.0 standard
• Supports 4Kx2K 60 Hz resolution
• Supports DTS Digital, Dolby Digital, DTS-HD, Dolby True HD audio compression
Signal HD's HDMI 1x8 splitter allows HDMI signals to be distributed to up to eight TV sets simultaneously.
• Signal distribution to up to 8 TVs
• Supports HDMI 2.0 standard
• Supports 4Kx2K 60 Hz resolution
• Supports DTS Digital, Dolby Digital, DTS-HD audio compression
• Supports HDMI 2.0 standard
• Supports 4Kx2K 60 Hz resolution
• Supports DTS Digital, Dolby Digital, DTS-HD audio compression
