The Signal HDMI H3601 converter/extender allows for transmission of HDMI signal over longer distances via minimum Cat. 5 twisted pair cable. There is also the possibility of IR remote control extension. The extender kit consists of transmitter and receiver units.
• New! Transmission via a single Cat. 5/5e/6 cable
• Transmission speed up to 10.2 Gb/s
• Support for 1080p
• Maximum range (Cat. 5): 80 m
• Maximum range (Cat. 5e): 100 m
• Maximum range (Cat. 6): 120 m
• IR remote control extender
• Transmission speed up to 10.2 Gb/s
• Support for 1080p
• Maximum range (Cat. 5): 80 m
• Maximum range (Cat. 5e): 100 m
• Maximum range (Cat. 6): 120 m
• IR remote control extender
The converter allows for transmission of HDMI signal over longer distances via minimum cat. 6 twisted pair cable. A USB control extension is provided.
• Transmission via a single Cat. 5/5e/6 6
• 1080p video mode
• Cat. 6 range up to 70 m
• USB extension cable
• 1080p video mode
• Cat. 6 range up to 70 m
• USB extension cable
The Signal HDMI H3603 converter/extender allows for transmission of HDMI signal over long distances via minimum Cat.6 twisted pair cable. The set can also extend IR control signals. The extender kit consists of transmitter (sender) and receiver units.
• Transmission via a single Cat. 6/6A/7 cable
• Transmission speed up to 18 Gbps
• Support for 4K x 2K 60Hz
• 4K x 2K 30 Hz - maximum range (Cat. 6/6A/7): 60 m
• 4K x 2K 60 Hz - maximum range (Cat. 6/6A/7): 30 m
• IR remote control extender
• Transmission speed up to 18 Gbps
• Support for 4K x 2K 60Hz
• 4K x 2K 30 Hz - maximum range (Cat. 6/6A/7): 60 m
• 4K x 2K 60 Hz - maximum range (Cat. 6/6A/7): 30 m
• IR remote control extender
Signal-HD HDMI to IP converter enables the user to connect remote (up to 100 m) source of HD content to HD-enabled television/monitor, using one CAT5e/6 cable. The set includes transmitter and receiver units, as well as remote control extender for a Blu-ray/DVD player, STB etc.
• HDMI to IP conversion
• UDP/IP protocol (multicast)
• Possibility of point-to-multipoint topology (switch)
• Built-in remote control extender function
• UDP/IP protocol (multicast)
• Possibility of point-to-multipoint topology (switch)
• Built-in remote control extender function
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network. IR extender.
• Transmission via a single cat. 5e/6 cable
• Low data stream load to the network
• UDP/IP transmission (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• IR extender
• Maximum cable length: 100 meters
• Low data stream load to the network
• UDP/IP transmission (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• IR extender
• Maximum cable length: 100 meters
The HDMI fiber optic converter allows for connection of HD signal to a receiver (TV, monitor) via optical network. IR extender.
• Transmission of HDMI signal via one single-mode fiber
• Max range of 20 km
• Signal source remote control possible - IR signal transmission
• Transmission of SD and HD signals and HD 1080p
• Support for HDCP
• Max range of 20 km
• Signal source remote control possible - IR signal transmission
• Transmission of SD and HD signals and HD 1080p
• Support for HDCP
The HDMI to IP converter enables the high definition (4K) signal connection to the receiver (TV, monitor) via the IP network. USB extender
• HDMI transmission using a single cable cat. 5e/6
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 4K
• Maximum cable length 100 m
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 4K
• Maximum cable length 100 m
The HDMI to IP converter enables the high definition (4K) signal connection to the receiver (TV, monitor) via the IP network. USB extender
• HDMI transmission using a single cable cat. 5e/6
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 4K
• Maximum cable length 100 m
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 4K
• Maximum cable length 100 m
The Signal-HD HDMI to IP converter enables the user to connect a remote (up to 100 m) source of HD content to an HD-enabled television/monitor, using one CAT5e/6 cable. The set includes transmitter and receiver units. USB ports in the units also allow for remote control of e.g. a DVR/NVR, by using a...
• HDMI transmission via a single Cat. 5e/6 cable
• USB extender for remote control of e.g. DVR/NVR!
• UDP/IP protocol
• Support for 1080p mode
• Maximum length of the transmission cable: 100 meters
• USB extender for remote control of e.g. DVR/NVR!
• UDP/IP protocol
• Support for 1080p mode
• Maximum length of the transmission cable: 100 meters
The additional receiver for use with the H3613 set allows sending HDMI signals over an IP network to another monitor/TV (using an Ethernet switch). The receiver has the ability to transmit a USB signal to the sender in order to control the source of the HDMI signal.