EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
The sti441C streamer enables conversion of DVB-T/T2/C signals from 4 multiplexes to IP standard (multicast) with a maximum throughput of 200 Mbps.
• Conversion of 4xDVB-T/T2/C signals to IP stream
• Conversion of 4 digital multiplexes (1 panel)
• USB connector for playback of source material in .ts format
• Built-in 2 CI slots for decoding encrypted channels
• IP multicast stream with maximum bandwidth of 200 Mbps – low use of LAN resources
• Possibility to create thematic (or e.g. language) lists of channels automatically detected by receivers
• Possibility of watching TV on PCs and laptops with free software installed
• Receivers equipped with recording functions and other multimedia functions (Youtube, etc.)
• Use of twisted-pair cable as a transmission medium
• Easy transmission of TV signal over long distances (fiber optic cable)
• Conversion of 4 digital multiplexes (1 panel)
• USB connector for playback of source material in .ts format
• Built-in 2 CI slots for decoding encrypted channels
• IP multicast stream with maximum bandwidth of 200 Mbps – low use of LAN resources
• Possibility to create thematic (or e.g. language) lists of channels automatically detected by receivers
• Possibility of watching TV on PCs and laptops with free software installed
• Receivers equipped with recording functions and other multimedia functions (Youtube, etc.)
• Use of twisted-pair cable as a transmission medium
• Easy transmission of TV signal over long distances (fiber optic cable)
The fan panel is used to cool the equipment housed in the CD001 metal housing for the TERRA headend.
• Fan panel designed to cool the devices in the CD001 metal housing
• 3 fans
• Thermostat
• 3 fans
• Thermostat
The mounting plate ID001 with DIN rail mounting is designed for mounting additional devices (multiswitches srm-522, ethernet switches) in metal housing CD001 with the DIN rail BD001.
• Accessory for the CD001 housing with BD001 DIN rail Terra
• Intended for mounting additional devices (srm-522 multiswitches, ethernet switches)
• Intended for mounting additional devices (srm-522 multiswitches, ethernet switches)
The CD001 metal housing with DIN rail BD001 mounted on the rear panel is designed for mounting devices, in particular TERRA headend components.
• Compact dimensions
• For TERRA headend
• For TERRA headend
The ZMD-35 module is a TH35 EURO rail with a length of 430 mm, set back 100 mm from the front of the rack.
• Enables installation of TV and non-TV components in a RACK cabinet
• Front-mounted
• Built-in EURO TH35 rail
• Dedicated for transmodulators, amplifiers and other elements
• Material: aluminium PA11
• Colour: black
• Front-mounted
• Built-in EURO TH35 rail
• Dedicated for transmodulators, amplifiers and other elements
• Material: aluminium PA11
• Colour: black
The ZMC-1 module is a 380 mm long EURO TH35 rail set back 100 mm from the front of the rack. The carrier is made of PA11 aluminium sheet, 2 mm thick.
• Allows to mount different types of equipment in RACK cabinet
• Front installation
• EURO TH35 rail included
• Dedicated for Terra channel DVB-T amplifiers
• Material: alluminium PA11
• Colour: black
• Front installation
• EURO TH35 rail included
• Dedicated for Terra channel DVB-T amplifiers
• Material: alluminium PA11
• Colour: black
The mix440 trans modulator enables conversion of IP streams of up to 200 Mbps in UDP/RTP technology to 4 DVB-C QAM MUXes.
• Modulator enables conversion of IP stream (200 Mbit/s) to 4 DVB-C MUX
• UDP/RTP support for unicast/multicast transmissions (SPTS/MPTS) to DVB-C QAM standard
• USB connection enabling playback of source material in .ts format
• Ability to integrate signals from IP cameras into a DVB-C installation
• 4 DVB-C multiplexes at the output
• Supports H.264 and H.265 codecs
• Internet management
• AGC function (automatic control of signal amplification)
• UDP/RTP support for unicast/multicast transmissions (SPTS/MPTS) to DVB-C QAM standard
• USB connection enabling playback of source material in .ts format
• Ability to integrate signals from IP cameras into a DVB-C installation
• 4 DVB-C multiplexes at the output
• Supports H.264 and H.265 codecs
• Internet management
• AGC function (automatic control of signal amplification)
The tdq481c8xDVB-S/S2 (8PSK, QPSK) - 8xDVB-C (QAM) FTA transmodulator enables the conversion of DVB-S/S2 signals from 8 satellite transponders to 8 DVB-C MUXes.
• DVB-S/S2 signal conversion from 8 satellite transponders to 8 DVB-C QAM multiplexes
• FTA free-to-air programmes
• Reception of 8 satellite transponders and conversion to any 8 DVB-C multiplexes
• Channel selection and filtering of unnecessary services in the digital stream.
• Compatible with dSCR/Unicable multiswitch series
• Control via RJ-45 port, which greatly simplifies the installation procedure
• Internet management
• Reading the history of events (logs) from the panel
• AGC function (automatic control of signal amplification)
• FTA free-to-air programmes
• Reception of 8 satellite transponders and conversion to any 8 DVB-C multiplexes
• Channel selection and filtering of unnecessary services in the digital stream.
• Compatible with dSCR/Unicable multiswitch series
• Control via RJ-45 port, which greatly simplifies the installation procedure
• Internet management
• Reading the history of events (logs) from the panel
• AGC function (automatic control of signal amplification)
The tdq441 transmodulator converts the DVB-S/S2(8PSK, QPSK) signal to 4 DVB-C QAM MUXes.
• DVB-S/S2 signal conversion from 8 satellite transponders to 4 DVB-C QAM multiplexes
• FTA free-to-air programmes
• Reception of 8 satellite transponders and conversion to any 4 DVB-C multiplexes
• Channel selection and filtering of unnecessary services in the digital stream
• Compatible with dSCR/Unicable multiswitch series
• Control via RJ-45 port, which greatly simplifies the installation procedure
• Internet management
• Reading the history of events (logs) from the panel
• AGC function (automatic control of signal amplification)
• FTA free-to-air programmes
• Reception of 8 satellite transponders and conversion to any 4 DVB-C multiplexes
• Channel selection and filtering of unnecessary services in the digital stream
• Compatible with dSCR/Unicable multiswitch series
• Control via RJ-45 port, which greatly simplifies the installation procedure
• Internet management
• Reading the history of events (logs) from the panel
• AGC function (automatic control of signal amplification)
The mix440 trans modulator enables conversion of IP streams of up to 200 Mbps in UDP/RTP technology to 4 DVB-T COFDM MUXes.
• The modulator enables conversion of IP stream (200 Mbps) to 4 DVB-T MUXes
• UDP/RTP support for unicast/multicast transmissions (SPTS/MPTS) to DVB-T COFDM standard
• USB connection enabling playback of source material in .ts format
• Possibility of introducing into signal from IP cameras to the DVB-T system
• 4 DVB-T multiplexes at the output
• Supports H.264 and H.265 codecs
• Web-based management
• AGC function (automatic control of signal gain)
• UDP/RTP support for unicast/multicast transmissions (SPTS/MPTS) to DVB-T COFDM standard
• USB connection enabling playback of source material in .ts format
• Possibility of introducing into signal from IP cameras to the DVB-T system
• 4 DVB-T multiplexes at the output
• Supports H.264 and H.265 codecs
• Web-based management
• AGC function (automatic control of signal gain)
