EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
The IDLP-WDB401 is an LNB used in multiswitch systems operating in Wide Band technology.
• Wideband LNB
• Local oscillator: 10.41 GHz
• Low noise
• Local oscillator: 10.41 GHz
• Low noise
Low-noise LWB202L Wideband LO 10.41 GHz satellite converter dedicated to SAT installations.
• LNB type: Wideband
• LO oscillator frequency: 10.41 GHz
• Low-noise LNB
• Two outputs: V-polarization, H-polarization
• Bracket diameter: 40 mm
• LO oscillator frequency: 10.41 GHz
• Low-noise LNB
• Two outputs: V-polarization, H-polarization
• Bracket diameter: 40 mm
The optical SAT/RTV OTX 1310 KIT from TRIAX allows the introduction of DVB-S/S2 satellite signals and DVB-T2 digital terrestrial TV, DAB radio and FM radio into a fibre optic installation.
• Fiber optic cabling
• One fiber optic cable instead of 5 or 9 cable bus
• Wideband LNB dedicated for satellite installation
• One fiber optic cable instead of 5 or 9 cable bus
• Wideband LNB dedicated for satellite installation
DISEQC 2.0 2X1 DS-7070 Signal switch used in installations distributing signals from two satellites.
• DiseqC switch
• 2 inputs, 1 output
• High isolation between inputs and outputs
• Grounding connector
• ABS housing
• Easy to install
• Two cable ties to ensure proper attachment
• 2 inputs, 1 output
• High isolation between inputs and outputs
• Grounding connector
• ABS housing
• Easy to install
• Two cable ties to ensure proper attachment
The IDLU-32UL40-UNBOO-OPP /cyfr. polsat/ LNB with UNICABLE output can supply from its single output up to 32 satellite receivers (tuners).
• LNB type: Unicable
• Number of outputs: 1
• Programmed to work with Cyfrowy Polsat decoders
• Gain min. 55 dB
• Holder diameter 40 mm
• Number of outputs: 1
• Programmed to work with Cyfrowy Polsat decoders
• Gain min. 55 dB
• Holder diameter 40 mm
The IDLU-32L412-UNBRR-OPN /nc+/ satellite converter with UNICABLE output is designed to provide a signal to a maximum of 32 receivers by connecting only one coaxial cable.
• LNB type: Unicable
• Number of outputs: 1
• Programmed to work with nc+/canal+
• Gain min. 55 dB
• Holder diameter 40 mm
• Number of outputs: 1
• Programmed to work with nc+/canal+
• Gain min. 55 dB
• Holder diameter 40 mm
The GT-WB1 LNB is dedicated for applications in multiswitch systems using Wide Band technology. It is based on a single local oscillator operating at 10.41 GHz.
• LNB type: Wide band for multiswitch systems
• Half of the cables (2 instead of 4)
• Two outputs: V polarization, H polarization
• Gain: 50-60 dB
• Neck diameter: 40 mm
• Half of the cables (2 instead of 4)
• Two outputs: V polarization, H polarization
• Gain: 50-60 dB
• Neck diameter: 40 mm
OCTO FTE Excellento satellite LNB equipped with eight independent fullband outputs.
• Converter type: OCTO
• Number of outputs: 8
• Gain of 65 dB
• Handle diameter 40 mm
• Number of outputs: 8
• Gain of 65 dB
• Handle diameter 40 mm
Fte eXcellento QUAD LNB A9865 is designed for operation with four single receivers or two double (twin-tuner) receivers. The LNB has four independent fullband outputs.
• Converter type: QUAD
• Number of outputs: 4
• 65 dB amplification
• Handle diameter 40 mm
• Number of outputs: 4
• 65 dB amplification
• Handle diameter 40 mm
Fte eXcellento QUATRO LNB A9864 is designed for operation in multiswitch systems (four outputs with different polarization/band combinations). Color markings are used for easier identification.
• Converter type: QUATRO
• Number of outputs: 4
• Designed for multiswitch installations
• 65 dB amplification
• Bracket diameter 40 mm
• Number of outputs: 4
• Designed for multiswitch installations
• 65 dB amplification
• Bracket diameter 40 mm
