EN
PL
CZ
DE
IE
HU
PT
RO
SK
MR508 5 in/8 out multiswitch with power supply and active terrestrial TV path dedicated for small and medium installations with distribution of RTV/SAT signals.
• High-end device dedicated to small, collective TV/SAT installations
• Distribution of satellite, terrestrial TV and radio signals
• Capable of distributing signals to 8 single outlets or 4 PVR receivers
• Armoured casing guaranteeing high level of shielding - class A
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
• Distribution of satellite, terrestrial TV and radio signals
• Capable of distributing signals to 8 single outlets or 4 PVR receivers
• Armoured casing guaranteeing high level of shielding - class A
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
MR512 5 in/12 out multiswitch with power supply and active terrestrial TV path dedicated for small and medium installations with distribution of RTV/SAT signals.
• High-end device dedicated to small, collective TV/SAT installations.
• Distribution of satellite, terrestrial TV and radio signals.
• Capable of distributing signals to 12 single outlets or 6 PVR receivers.
• Armoured casing guaranteeing high level of shielding - class A.
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
• Distribution of satellite, terrestrial TV and radio signals.
• Capable of distributing signals to 12 single outlets or 6 PVR receivers.
• Armoured casing guaranteeing high level of shielding - class A.
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
The MR516 5 in/16 out multiswitch with power supply and active terrestrial TV path is dedicated for small and medium-sized installations with RTV/SAT signal distribution.
• High-end device dedicated to small, collective TV/SAT installations
• Distribution of satellite, terrestrial TV and radio signals
• Capable of distributing signals to 16 single outlets or 8 PVR receivers
• Armoured casing guaranteeing high level of shielding - class A
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
• Distribution of satellite, terrestrial TV and radio signals
• Capable of distributing signals to 16 single outlets or 8 PVR receivers
• Armoured casing guaranteeing high level of shielding - class A
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
MR524 5 in/24 out multiswitch with power supply and active terrestrial TV path dedicated for small and medium-sized installations with distribution of RTV/SAT signals.
• High-end device dedicated to small, collective TV/SAT installations
• Distribution of satellite, terrestrial TV and radio signals
• Capable of distributing signals to 24 single outlets or 12 PVR receivers
• Armoured casing guaranteeing high level of shielding - class A
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
• Distribution of satellite, terrestrial TV and radio signals
• Capable of distributing signals to 24 single outlets or 12 PVR receivers
• Armoured casing guaranteeing high level of shielding - class A
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
MR532 5 in/32 out multiswitch with power supply and active terrestrial TV path dedicated for small and medium-sized installations with distribution of RTV/SAT signals.
• High-end device dedicated to small, collective TV/SAT installations.
• Distribution of satellite, terrestrial TV and radio signals.
• Capable of distributing up to 32 single outlets or 16 PVR receivers.
• Armoured casing guaranteeing high level of shielding - class A.
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
• Distribution of satellite, terrestrial TV and radio signals.
• Capable of distributing up to 32 single outlets or 16 PVR receivers.
• Armoured casing guaranteeing high level of shielding - class A.
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
Multiswitch MV508 5 in/8 out without power supply and active terrestrial TV path dedicated for medium and large installations with distribution of RTV/SAT signals.
• MV multiswitch series for SMATV systems
• Single satellite + DVB-T/T2 signals
• 8 subscriber outlets
• Allows you to build flexible installations
• Top class equipment
• The cast iron casing ensures high screening efficiency
• Switches instead of traditional potentiometers (more stable settings)
• High output signal level - up to 80 m cables to sockets
• Grouping of outputs according to gain
• Built-in pre-correction of cable attenuation characteristics
• Local or remote power supply
• Practically zero failure rate
• Free SatNet software for network design
• Single satellite + DVB-T/T2 signals
• 8 subscriber outlets
• Allows you to build flexible installations
• Top class equipment
• The cast iron casing ensures high screening efficiency
• Switches instead of traditional potentiometers (more stable settings)
• High output signal level - up to 80 m cables to sockets
• Grouping of outputs according to gain
• Built-in pre-correction of cable attenuation characteristics
• Local or remote power supply
• Practically zero failure rate
• Free SatNet software for network design
Multiswitch MV512 5 in/12 out without power supply and active terrestrial TV path dedicated for medium and large installations with distribution of RTV/SAT signals.
• MV multiswitch series for SMATV systems
• Single satellite + DVB-T/T2 signals
• 12 subscriber outlets
• Allows you to build flexible installations
• Top class equipment
• The cast iron casing ensures high screening effectiveness.
• Switches instead of traditional potentiometers (more stable settings)
• High output signal level - up to 80 m cables to sockets
• Grouping of outputs according to gain
• Built-in pre-correction of cable attenuation characteristics
• Local or remote power supply
• Practically zero failure rate
• Free SatNet software for network design
• Single satellite + DVB-T/T2 signals
• 12 subscriber outlets
• Allows you to build flexible installations
• Top class equipment
• The cast iron casing ensures high screening effectiveness.
• Switches instead of traditional potentiometers (more stable settings)
• High output signal level - up to 80 m cables to sockets
• Grouping of outputs according to gain
• Built-in pre-correction of cable attenuation characteristics
• Local or remote power supply
• Practically zero failure rate
• Free SatNet software for network design
Multiswitch MV516 5 in/16 out without power supply and active terrestrial TV path dedicated for medium and large installations with distribution of RTV/SAT signals.
• MV multiswitch series for SMATV systems
• Single satellite + DVB-T/T2 signals
• 16 subscriber outlets
• Allows you to build flexible installations
• Top class equipment
• The cast iron casing ensures high screening efficiency
• Switches instead of traditional potentiometers (more stable settings)
• High output signal level - up to 80m cables to sockets
• Grouping of outputs according to gain
• Built-in pre-correction of cable attenuation characteristics
• Local or remote power supply
• Practically zero failure rate
• Free SatNet software for network design
• Single satellite + DVB-T/T2 signals
• 16 subscriber outlets
• Allows you to build flexible installations
• Top class equipment
• The cast iron casing ensures high screening efficiency
• Switches instead of traditional potentiometers (more stable settings)
• High output signal level - up to 80m cables to sockets
• Grouping of outputs according to gain
• Built-in pre-correction of cable attenuation characteristics
• Local or remote power supply
• Practically zero failure rate
• Free SatNet software for network design
Multiswitch MV524 5 in /24 out without power supply and active terrestrial TV path dedicated for medium and large installations with distribution of RTV/SAT signals.
• MV multiswitch series for SMATV systems
• Single satellite + DVB-T/T2 signals
• 24 subscriber outlets
• Allows you to build flexible installations
• Top class equipment
• The cast iron casing ensures high screening efficiency
• Switches instead of traditional potentiometers (more stable settings)
• High output signal level - up to 80 m cables to sockets
• Grouping of outputs according to gain
• Built-in pre-correction of cable attenuation characteristics
• Local or remote power supply
• Practically zero failure rate
• Free SatNet software for network design
• Single satellite + DVB-T/T2 signals
• 24 subscriber outlets
• Allows you to build flexible installations
• Top class equipment
• The cast iron casing ensures high screening efficiency
• Switches instead of traditional potentiometers (more stable settings)
• High output signal level - up to 80 m cables to sockets
• Grouping of outputs according to gain
• Built-in pre-correction of cable attenuation characteristics
• Local or remote power supply
• Practically zero failure rate
• Free SatNet software for network design
Multiswitch MV532 5 in/32 out multiswitch without power supply and active terrestrial TV path dedicated for medium and large installations with distribution of RTV/SAT signals.
• MV multiswitch series for SMATV systems
• Single satellite + DVB-T/T2 signals
• 32 subscriber outlets
• Allows you to build flexible installations
• Top class equipment
• The cast iron casing ensures high screening efficiency
• Switches instead of traditional potentiometers (more stable settings)
• High output signal level - up to 80m cables to sockets
• Grouping of outputs according to gain
• Built-in pre-correction of cable attenuation characteristics
• Local or remote power supply
• Practically zero failure rate
• Free SatNet software for network design
• Single satellite + DVB-T/T2 signals
• 32 subscriber outlets
• Allows you to build flexible installations
• Top class equipment
• The cast iron casing ensures high screening efficiency
• Switches instead of traditional potentiometers (more stable settings)
• High output signal level - up to 80m cables to sockets
• Grouping of outputs according to gain
• Built-in pre-correction of cable attenuation characteristics
• Local or remote power supply
• Practically zero failure rate
• Free SatNet software for network design
