The tap is used in multiswitch installations to extend the signal bus consisting of four satellite lines (carrying signals from a Quatro LNB) and terrestrial line with DVB-T, DAB, FM signals. The tap is equipped with DC-transition switch that in "ON" position runs current through "H" paths to both b...
The tap is used in multiswitch installations to extend the signal bus consisting of four satellite lines (carrying signals from a Quatro LNB) and terrestrial line with DVB-T, DAB, FM signals. The tap is equipped with DC-transition switch that in "ON" position runs current through "H" paths to both b...
The tap is used in multiswitch installations to extend the signal bus consisting of four satellite lines (carrying signals from a Quatro LNB) and terrestrial line with DVB-T, DAB, FM signals. The tap is equipped with DC-transition switch that in "ON" position runs current through "H" paths to both b...
The tap is used in multiswitch installations to divide 9-cable systems into two subnetworks (18 outputs), the primary with lower attenuation and the secondary with higher attenuation. The application of the taps in large, unsymmetrical multiswitch systems allows for equalization of signal levels in ...
• 9-cable system (8x SAT + terrestrial TV/Radio)
• Divides the system into two subnetworks with different signal levels (average attenuation of 1.7 dB and 10 dB)
• Replaces 9 individual TV/SAT taps
• Equipped with optionally switched-off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
• Divides the system into two subnetworks with different signal levels (average attenuation of 1.7 dB and 10 dB)
• Replaces 9 individual TV/SAT taps
• Equipped with optionally switched-off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
The tap is used in multiswitch installations to divide 9-cable systems into two subnetworks (18 outputs), the main (pass-through) branch with low attenuation and the tap branch with higher attenuation. The application of the taps in large, unsymmetrical multiswitch systems allows for equalization of...
• 9-cable system (8x SAT + terrestrial TV/Radio)
• Divides the system into two subnetworks with different signal levels (average attenuation of 1.2 dB and 15 dB)
• Replaces 9 individual TV/SAT taps
• Equipped with switched-on/off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
• Divides the system into two subnetworks with different signal levels (average attenuation of 1.2 dB and 15 dB)
• Replaces 9 individual TV/SAT taps
• Equipped with switched-on/off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
The tap is used in multiswitch installations to divide 9-cable systems into two subnetworks (18 outputs), the primary (pass-through) branch with low attenuation and the secondary (tap) branch with higher attenuation. The application of the taps in large, unsymmetrical multiswitch systems allows for ...
• 9-cable system (8x SAT + terrestrial TV/Radio)
• Divides the system into two subnetworks with different signal levels (average attenuation of 1 dB and 20 dB)
• Replaces 9 individual TV/SAT taps
• Equipped with switched-on/off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
• Divides the system into two subnetworks with different signal levels (average attenuation of 1 dB and 20 dB)
• Replaces 9 individual TV/SAT taps
• Equipped with switched-on/off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
