Surge protection protects the system from the effects of overvoltages and voltages induced in conductors due to lightning.
• Lightning protection of TV and SAT TV devices
• Pass band: 5-2400 MHz
• Insertion loss not higher than 1.5 dB
• Maximum current (8/20 µs): 8 kA
• Screening efficiency: A class
• Pass band: 5-2400 MHz
• Insertion loss not higher than 1.5 dB
• Maximum current (8/20 µs): 8 kA
• Screening efficiency: A class
A galvanic isolator is an element used in television installations to neutralise the negative effects of potential differences in the various branches of the network.
• Solves problems caused by potential differences between network segments, network and receivers etc.
• Operating band: 2400 MHz
• Low loss (<1.5 dB up to 1000 MHz)
• Full galvanic isolation (both of signal path and screen
• Breakdown voltage 3000 V for 1 minute test with current leak < 0.7 mA
• Operating band: 2400 MHz
• Low loss (<1.5 dB up to 1000 MHz)
• Full galvanic isolation (both of signal path and screen
• Breakdown voltage 3000 V for 1 minute test with current leak < 0.7 mA
Signal surge protection box has been designed to provide comprehensive protection of SMATV systems, especially multiswitch installations.
• Number of protectors 12
• Operating band 5-2400 MHz
• Maximum current for 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
• Operating band 5-2400 MHz
• Maximum current for 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
ZPZ-12 Signal has been designed to provide comprehensive protection of SMATV systems, in particular multiswitch installations.
• Interior/exterior box made of PA 11 aluminium alloy, powder-coated in RAL 7035
• The cable holes are placed through the box
• Number of interconnectors 12
• Operating bandwidth 5-2400 MHz
• Maximum current at 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
• The cable holes are placed through the box
• Number of interconnectors 12
• Operating bandwidth 5-2400 MHz
• Maximum current at 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
ZMZ-12 Signal is designed to provide comprehensive protection of SMATV systems, in particular multiswitch installations.
• Interior / exterior box made of PA 11 aluminium alloy, powder-coated in RAL 7035
• Cable entry points are located at the bottom of the box
• Number of protectors 12
• Operating band 5-2400 MHz
• Maximum current at 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
• Cable entry points are located at the bottom of the box
• Number of protectors 12
• Operating band 5-2400 MHz
• Maximum current at 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
ZMZ-13 Signal is designed to provide comprehensive protection of SMATV systems, in particular multiswitch installations.
• Interior / exterior box made of PA 11 aluminium alloy, powder-coated in RAL 7035
• Cable openings are at the bottom of the box
• Number of protectors 13
• Operating band 5-2400 MHz
• Maximum current at 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
• Cable openings are at the bottom of the box
• Number of protectors 13
• Operating band 5-2400 MHz
• Maximum current at 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
