EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
The Signal R-2 signal splitter splits CATV signals in the 5-1000 MHz band.
• Splits DVB-T / FM signals into two paths
• Operating band: 5-1000 MHz
• F-f connectors
• Cast aluminum housing
• Operating band: 5-1000 MHz
• F-f connectors
• Cast aluminum housing
The Signal R-3 signal splitter splits CATV signals in the 5-1000 MHz band.
• DVB-T/T2 signal split into three channels
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
The Signal R-4 signal splitter allows the division of CATV signals in the 5-1000 MHz band.
• DVB-T/T2 signal splitting into four channels
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
The Signal R-6 signal splitter splits CATV signals in the 5-1000 MHz band.
• DVB-T/T2 signal splitting into six tracks
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
The Signal R-8 signal splitter splits CATV signals in the 5-1000 MHz band.
• DVB-T/T2 signal splitting into eight channels
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
The FAC-1-6 dB TV tapping unit allows the bus signal to be separated in a CATV installation in the 5-1000 MHz band.
• Operating bandwidth 5-1000 MHz
• Spur attenuation 6 dB
• F-type connectors
• Cast aluminium alloy housing
• Spur attenuation 6 dB
• F-type connectors
• Cast aluminium alloy housing
The FAC-1-10 dB TV tapping unit allows the bus signal to be separated in a CATV installation in the 5-1000 MHz band.
• Operating bandwidth 5-1000 MHz
• Spur attenuation 10 dB
• F-type connectors
• Cast aluminium alloy housing
• Spur attenuation 10 dB
• F-type connectors
• Cast aluminium alloy housing
The operating frequency range is 5-1000 MHz. The tap is equipped with F connectors and cast aluminum housing.
• Dedicated to FM and TV systems
• Die-cast enclosure
• High input/output separation
• Screening efficiency class A
• Die-cast enclosure
• High input/output separation
• Screening efficiency class A
The splitter operates from 5-1000 MHz and its performance is similar to other splitters in this class.
• Operating bandwidth 5-1000 MHz
• Spur attenuation 12 dB
• F-type connectors
• Cast aluminium alloy housing
• Spur attenuation 12 dB
• F-type connectors
• Cast aluminium alloy housing
The operating frequency range of the tap is 5-1218 MHz. The product ensures good quality and suitability for professional use.
• Die-cast casing made of aluminum alloy
• Operating frequency range: 5-1218 MHz
• Screening class: A
• Different attenuation on outputs
• Operating frequency range: 5-1218 MHz
• Screening class: A
• Different attenuation on outputs
SZU 55-02 satellite splitter/combiner with bi-directional DC power transition operating in the 5-2400 MHz band.
• TV-SAT signal splitting into 2 tracks
• Unicable type signal combiner
• Operating band 5 - 2400 MHz
• DC pass-through between outputs and input in two directions
• Shielding class A
• Unicable type signal combiner
• Operating band 5 - 2400 MHz
• DC pass-through between outputs and input in two directions
• Shielding class A
The 1>2F Signal satellite splitter allows the signal to be split into 2 subnetworks in the 5-2400 MHz band.
• Split TV-SAT signal on 2 tracks
• Operating bandwidth 5 - 2400 MHz
• DC pass-through between outputs and input
• Attenuation of I/O 4 dB
• Operating bandwidth 5 - 2400 MHz
• DC pass-through between outputs and input
• Attenuation of I/O 4 dB
The 1>3F Signal satellite splitter allows the signal to be split into 3 subnetworks in the 5-2400 MHz band.
• Splitting SAT TV and TV signals into 3 paths
• Operating band: 5-2400 MHz
• DC pass between outputs and input
• Insertion loss (input-output): 8 dB
• Operating band: 5-2400 MHz
• DC pass between outputs and input
• Insertion loss (input-output): 8 dB
The 1>4F Signal satellite splitter allows the signal to be split into 4 subnetworks in the 5-2400 MHz band.
• Splitting signals into 4 paths
• Operating band: 5 - 2400 MHz
• DC pass between outputs and input
• Signal loss (IN/OUT): 10 dB
• Operating band: 5 - 2400 MHz
• DC pass between outputs and input
• Signal loss (IN/OUT): 10 dB
The 1>6F Signal satellite splitter allows the signal to be split into 6 subnetworks in the 5-2400 MHz band.
• Splitting signals into 6 paths
• Operating band: 5 - 2400 MHz
• DC pass between outputs and input
• Signal loss (IN/OUT): 12 dB
• Operating band: 5 - 2400 MHz
• DC pass between outputs and input
• Signal loss (IN/OUT): 12 dB
The 1>8F Signal satellite splitter allows the signal to be divided into 8 subnetworks in the 5-2400 MHz band.
• Split TV-SAT signal on 8 tracks
• Operating bandwidth 5 - 2400 MHz
• DC pass-through between outputs and input
• Attenuation of I/O 14 dB
• Operating bandwidth 5 - 2400 MHz
• DC pass-through between outputs and input
• Attenuation of I/O 14 dB
