English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
Active DVB-T splitter R14R B1225 is used for distribution of terrestrial DVB-T and DAB/DAB+/FM radio signals within 47-860 MHz band. The four output paths are isolated. The input signal level from an antenna should not exceed 95 dBμV (passive antennas usually provide signals at levels 60...75 dBμV).
• Splits antenna signal into 4 isolated paths
• Independent gain adjustment ( 2...12 dB) in each path
• Frequency range covers UHF, VHF and FM bands; out-of-band signals (CB, GSM,LTE) are filtered
• Powered through output 1 ( 12 VDC / 100 mA), auto power supply for an antenna preamplifier
• Weatherproof casing
• Independent gain adjustment ( 2...12 dB) in each path
• Frequency range covers UHF, VHF and FM bands; out-of-band signals (CB, GSM,LTE) are filtered
• Powered through output 1 ( 12 VDC / 100 mA), auto power supply for an antenna preamplifier
• Weatherproof casing
5-862 MHz band, 17 dB rejection loss. 4dB through loss, 75 Ohm in/out impedance. Allows to connect multiple receivers to a single antenna. Can also be used as an antenna adder. Built on an un-coupling transformer. Input, output - F-type plugs. Can be installed on a mast. Direct current flow possibil...
The splitter is CE certified. Its operating frequency range is 5-1000 MHz and the product represents good, standard parameters within its class. It is equipped with F connectors and cast aluminum housing.
• Splits DVB-T / FM signals into two paths
• Operating band: 5-1000 MHz
• F-f connectors
• Cast aluminum housing
• Operating band: 5-1000 MHz
• F-f connectors
• Cast aluminum housing
The splitter is CE certified. Its operating frequency range is 5-1000 MHz and the product represents good, standard parameters within its class. It is equipped with F connectors and cast aluminum housing.
The splitter is CE certified. Its operating frequency range is 5-1000 MHz and the product represents good, standard parameters within its class. It is equipped with F connectors and cast aluminum housing.
The splitter is CE certified. Its operating frequency range is 5-1000 MHz and the product represents good, standard parameters within its class. It is equipped with F connectors and cast aluminum housing.
• DVB-T/T2 signal splitting into six tracks
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
The splitter is CE certified. Its operating frequency range is 5-1000 MHz and the product represents good, standard parameters within its class. It is equipped with F connectors and cast aluminum housing.
• Splits FM/DAB/TV signals into 8 paths
• 5-1000 MHz operating band
• Loss: max 12.1 dB
• Die-cast aluminum housing
• F connectors
• 5-1000 MHz operating band
• Loss: max 12.1 dB
• Die-cast aluminum housing
• F connectors
The operating frequency range of the tap is 5-1000 MHz. The product ensures good quality and suitability for professional use. Continuous quality control guarantees very good repeatability of technical parameters. The tap is equipped with F connectors and cast aluminum housing.
The family of FAC ta...
The operating frequency range is 5-1000 MHz. The tap is equipped with F connectors and cast aluminum housing. The product ensures good quality and suitability for professional use. Continuous quality control guarantees repeatability of parameters.
The family of FAC taps contains wide range of devic...
The operating frequency range is 5-1000 MHz. The tap is equipped with F connectors and cast aluminum housing.
• Dedicated to FM and TV systems
• Die-cast enclosure
• High input/output separation
• Screening efficiency class A
• Die-cast enclosure
• High input/output separation
• Screening efficiency class A
