EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
The OTM302T optical transmitter is used to create fiber optic RF/SAT systems and the implementation of transmissions at a wavelength of 1310 nm.
• FP laser
• 1310 nm wavelength
• +6 dBm optical output power
• Built-in RF converter
• Die-cast housing guarantees high level of screening – class A
• AGC – automatic gain control stabilizes the signal level
• LEDs on the housing make it much easier to properly configure the entire system
• 1310 nm wavelength
• +6 dBm optical output power
• Built-in RF converter
• Die-cast housing guarantees high level of screening – class A
• AGC – automatic gain control stabilizes the signal level
• LEDs on the housing make it much easier to properly configure the entire system
The OTF302 6F31 E TERRA optical transmitter is used to create TV/SAT systems using optical fibre technology and transmission at 1310 nm wavelength (transmission window II).
• FP type laser
• Wavelength 1310 nm
• Power at optical output +6 dBm
• Open housing ensuring high level of shielding – class A
• AGC – automatic gain control stabilizing signal level
• LEDs on the housing for much easier configuration of the entire system
• Wavelength 1310 nm
• Power at optical output +6 dBm
• Open housing ensuring high level of shielding – class A
• AGC – automatic gain control stabilizing signal level
• LEDs on the housing for much easier configuration of the entire system
The ORQ302 E optical receiver allows the conversion of the optical signal coming from the OTF302 6F31 E A3031 or OTF302 6F55 E A3055 transmitter into an electrical signal. QUATRO + DVB-T2 type output.
• Wavelength 1100...1650 nm
• Acceptable power level at optical input -15...-5 dBm
• Open casing guaranteeing high level of shielding - class A
• OLC - automatic control to stabilise signal level
• LEDs on the casing greatly facilitating proper configuration of the whole system
• DC power supply is provided directly from the connected multiswitch or from an external DC 10...20 V power supply, which is not standard equipment
• Acceptable power level at optical input -15...-5 dBm
• Open casing guaranteeing high level of shielding - class A
• OLC - automatic control to stabilise signal level
• LEDs on the casing greatly facilitating proper configuration of the whole system
• DC power supply is provided directly from the connected multiswitch or from an external DC 10...20 V power supply, which is not standard equipment
The ORD301F E optical receiver allows the conversion of the optical signal coming from the OTF302 6F31 E or OTF302 6F55 E transmitter into an electrical signal
• Wavelength 1100...1650 nm
• Acceptable power level at the optical input -15...-5 dBm
• Open housing ensuring high level of shielding – class A
• OLC – automatic control stabilizing signal level
• Acceptable power level at the optical input -15...-5 dBm
• Open housing ensuring high level of shielding – class A
• OLC – automatic control stabilizing signal level
The optical SAT/RTV OTX 1310 KIT from TRIAX allows the introduction of DVB-S/S2 satellite signals and DVB-T2 digital terrestrial TV, DAB radio and FM radio into a fibre optic installation.
• Fiber optic cabling
• One fiber optic cable instead of 5 or 9 cable bus
• Wideband LNB dedicated for satellite installation
• One fiber optic cable instead of 5 or 9 cable bus
• Wideband LNB dedicated for satellite installation
The QUATRO converter has been designed for output replication of satellite IF signals and DVB-T/T2 and FM/DAB digital terrestrial TV antennas. It is powered from a multiswitch.
• Receiver works with TOU 232 KIT and LNB TOL32
• Converts optical signal to electrical signal (4x SAT + DVB-T)
• Sensitivity: -15...0 dBm
• Converts optical signal to electrical signal (4x SAT + DVB-T)
• Sensitivity: -15...0 dBm
The QUAD converter has been designed for output replication of satellite IF signals and DVB-T/T2 and FM/DAB digital terrestrial antennas.
• Receiver works with TOU 232 KIT and LNB TOL32
• Converts optical signal to electrical signal (4x SAT + DVB-T)
• Sensitivity: -15...0 dBm
• Converts optical signal to electrical signal (4x SAT + DVB-T)
• Sensitivity: -15...0 dBm
