EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
The FTTH OD-012 H optical receiver (SC/APC optical connector) is designed to convert optical signals into electrical signals in the 47-862/1006 MHz band.
• Optical connector: SC/APC
• Open housing for high screening efficiency
• Output bandwidth 47-862/1006 MHz
• Microprocessor-based AGC (automatic gain control) based on optical signal level
• Range of signal level at optical input: -9...2 dBm
• Maximum output level: 108 dBµV
• Open housing for high screening efficiency
• Output bandwidth 47-862/1006 MHz
• Microprocessor-based AGC (automatic gain control) based on optical signal level
• Range of signal level at optical input: -9...2 dBm
• Maximum output level: 108 dBµV
The OD-004A optical node (SC/APC optical connector) is designed to convert an optical signal into an electrical signal in the 47-2400 MHz band.
• Compact dimensions
• Output bandwidth 47-2400 MHz
• Microprocessor-based AGC (automatic gain control) based on optical signal level
• Connector: optical: SC/APC
• Output bandwidth 47-2400 MHz
• Microprocessor-based AGC (automatic gain control) based on optical signal level
• Connector: optical: SC/APC
The OD-003 optical node (SC/APC optical connector) is designed to convert an optical signal into an electrical signal in the 47-1002 MHz band.
• Compact size
• Expanded output bandwidth 47-1002 MHz
• Very high sensitivity: -10...3 dBm
• Microprocessor-based automatic gain control (AGC)
• Maximum output signal level: 80 dBμV
• LED display
• Connectors: optical - SC/APC
• Expanded output bandwidth 47-1002 MHz
• Very high sensitivity: -10...3 dBm
• Microprocessor-based automatic gain control (AGC)
• Maximum output signal level: 80 dBμV
• LED display
• Connectors: optical - SC/APC
The OD-005P optical receiver (SC/APC optical connector) is designed to convert an optical signal into an electrical signal in the 47-862 MHz band.
• Compact size
• Die-cast housing provides high efficiency shielding to prevent interfering signals from penetrating inside the unit
• Output bandwidth 47-862 MHz
• Sensitivity -6 ... 0 dBm
• Maximum output level 107 dBμV
• Microprocessor-based AGC (automatic gain control) based on signal level
• Die-cast housing provides high efficiency shielding to prevent interfering signals from penetrating inside the unit
• Output bandwidth 47-862 MHz
• Sensitivity -6 ... 0 dBm
• Maximum output level 107 dBμV
• Microprocessor-based AGC (automatic gain control) based on signal level
The OD-006 compact optical receiver (SC/APC optical connector) is designed to convert an optical signal into an electrical signal in the 47-1006 MHz band.
• Compact-size (7 cm long) optical DVB-T/DVB-C receiver
• Die-cast housing providing high screening efficiency by preventing the penetration of interfering signals to the unit
• Output RF range: 47-1006 MHz
• Sensitivity: -6...0 dBm
• Max output level: 80 dBμV
• AGC based on optical input level
• Die-cast housing providing high screening efficiency by preventing the penetration of interfering signals to the unit
• Output RF range: 47-1006 MHz
• Sensitivity: -6...0 dBm
• Max output level: 80 dBμV
• AGC based on optical input level
The OD-007 H compact optical receiver (SC/APC optical connector) is designed to convert an optical signal into an electrical signal in the 47-2400 MHz band.
• Compact size
• Remotely powered from a 10 V...20 V / 60 mA source
• Die-cast housing providing high screening efficiency by preventing the penetration of interfering signals to the unit
• Output RF range: 47-2400 MHz
• AGC based on optical input level
• Optical connector: SC/APC
• Remotely powered from a 10 V...20 V / 60 mA source
• Die-cast housing providing high screening efficiency by preventing the penetration of interfering signals to the unit
• Output RF range: 47-2400 MHz
• AGC based on optical input level
• Optical connector: SC/APC
