The FTTH OD-012 H optical receiver (SC/APC optical connector) is designed to convert optical signals into electrical signals in the 47-862/1006 MHz band.
• Interface: optical: SC/APC; RF output: F female
• Output bandwidth: 47-862/1006 MHz
• Microprocessor-based AGC (automatic gain control) based on the level of the optical signal
• Open housing provides high shielding efficiency preventing interfering signals from penetrating inside the device
• Compact dimensions
Code: R81520
€156.54
Available

FTTH Optical Receiver TERRA OD-004A R81717 is used in systems distributing satellite DVB-S/S2, DVB-T and FM/DAB signals within 47-2400 MHz range via optical fibers.
• Compact dimensions
• Output band 47-2400 MHz
• Maximum output level 80 dBµV
• Microprocessor AGC (automatic gain control) based on the optical signal level
• Interface: optical: SC/APC
• Signal level at the optical input: -15...-6/-8...0 dBm
Code: R81717
€98.17
Available

Optical node OD-003 converts optical signals into RF electrical signals. It cooperates with optical transmitters of MOS-211x series ( R81720, R81720B) transmitting modulated light over single-mode optical fiber. Such optical links can transmit multiple channels from the headend to distant locations ...
Code: R81728
€81.87
Available

The TERRA OD-005P R81760 optical node (FTTH optical receiver) is a component of TV antenna systems involving fiber optic technology. The technology is characterized by low attenuation, small interference, and most importantly it allows for transmission of signals over long distances. The DVB-T and F...
• Compact size
• Die-cast housing providing high screening efficiency by preventing the penetration of interfering signals to the unit
• Output RF range: 47-862 MHz
• AGC based on optical input level
Code: R81760
€114.74
Available

The TERRA OD-006 R81762 optical node (FTTH optical receiver) is a component of TV antenna systems involving fiber optic technology. The device converts DVB-T and FM/DAB signals provided via an optical link into RF signals that are locally distributed to terminal outlets. Optical technology is charac...
• Compact-size (7 cm long) optical DVB-T/DVB-C receiver
• Die-cast housing providing high screening efficiency by preventing the penetration of interfering signals to the unit
• Output RF range: 47-1006 MHz
• Sensitivity: -6...0 dBm
• Max output level: 80 dBμV
• AGC based on optical input level
Code: R81762
€59.53
Available

The TERRA OD-007 R81764 optical node (FTTH optical receiver) is a component of TV antenna systems involving fiber optic technology. The device converts DVB-S/S2, DVB-T and FM/DAB signals provided via an optical link into RF signals that are locally distributed to terminal outlets. Optical technology...
• Compact size
• Remotely powered from a 10 V...20 V / 60 mA source
• Die-cast housing providing high screening efficiency by preventing the penetration of interfering signals to the unit
• Output RF range: 47-2400 MHz
• AGC based on optical input level
• Optical connector: FC/APC
Code: R81764
€50.99
Available

The TERRA mo418 4D31 R82522 optical transmitter is used for transmission of television signals via optical medium. It converts input electrical signals within 47-2400 MHz range, fed with coaxial cable, into optical signal. The power of the optical signal is +++6 dBm (4 mW)+++, which is sufficient fo...
Code: R82522
€538.07
Temporarily unavailable

The TERRA mo428 4D31 R82523 optical transmitter is used for transmission of television signals via optical medium. It converts input electrical signals within 47-2400 MHz range, fed with coaxial cable, into optical signals. The power of the optical signal at each of the two independent optical outpu...
Code: R82523
€756.59
Item to order

The mo418 4F31 TERRA optical transmitter is designed for transmitting TV signals via fiber optic medium.
• Transmitter enables distribution of DVB-S/S2 and CATV signals
• Laser type - FP (Fabry-Perot)
• Input frequency range: 47-2400 MHz
• RF signal loop input
• AGC function (automatic signal gain control)
• Maximum input level: 85 dBμV
• Input level adjustment 0...-15 dB in 1 dB steps
• Device programmable digitally using buttons located on the front panel
• Two-position display
• Several mounting options (DIN rail, facade)
• Connectors: 3xRF: input/output and test output - type F, 1x optical - SC/APC
Code: R82526
€424.88
Available