EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
FOS 108 E optical splitter is an element used to divide the optical signal into 8 paths.
• Dividing the signal into 8 paths
• FC/PC sockets
• Box type housing
• Attenuation of 10.8 dB
• FC/PC sockets
• Box type housing
• Attenuation of 10.8 dB
SIGNAL PRO optical transmitter TR-501 is used for the transmission of RTV/SAT signals using optical fibre technology. Input type 1xQUATRO + radio/DVB-T2.
• Conversion of DVB-S/S2 (1 satellite position) and radio/DVB-T2 signals
• Input type 1xQUATRO + radio/DVB-T2
• Compatible with QUAD or QUATRO converter
• Output power 4 x +3 dBm
• Connector type SC/APC
• WDM technology (all signals in 1 fibre)
• AGC - automatic gain control stabilising signal level
• LEDs for easy diagnostics
• Single-mode fibre optic transmission
• Maximum signal splitting up to 16 QUATRO REC-105 receivers
• Input type 1xQUATRO + radio/DVB-T2
• Compatible with QUAD or QUATRO converter
• Output power 4 x +3 dBm
• Connector type SC/APC
• WDM technology (all signals in 1 fibre)
• AGC - automatic gain control stabilising signal level
• LEDs for easy diagnostics
• Single-mode fibre optic transmission
• Maximum signal splitting up to 16 QUATRO REC-105 receivers
The REC-105 optical receiver enables the conversion of the optical signal from the TR-901 transmitter into an electrical signal. Output type 1xQUATRO + radio/DVB-T2.
• Output type 1xQUATRO + radio/DVB-T2
• Compatible with TR-501 SIGNAL PRO optical transmitter
• Built-in AGC circuit, which ensures signal stability at the output of the device
• Supported wavelengths: 1550-1570 nm
• Conversion of optical signal to full band 1x SAT IF (VL/VH/HL/HH) in QUATRO circuit and radio/DVB-T2 signals
• High noise immunity and stable operation over a wide input power range
• High sensitivity for multi-point installations
• SC/APC optical connector
• Compatible with TR-501 SIGNAL PRO optical transmitter
• Built-in AGC circuit, which ensures signal stability at the output of the device
• Supported wavelengths: 1550-1570 nm
• Conversion of optical signal to full band 1x SAT IF (VL/VH/HL/HH) in QUATRO circuit and radio/DVB-T2 signals
• High noise immunity and stable operation over a wide input power range
• High sensitivity for multi-point installations
• SC/APC optical connector
The TR-901 SIGNAL PRO optical transmitter is used for the transmission of RTV/SAT signals using optical fibre technology. Input type 2xQUATRO + radio/DVB-T2.
• Conversion of DVB-S/S2 (2 satellite positions) and radio/DVB-T2 signals
• Input type: 2xQUATRO + radio/DVB-T2
• Compatible with QUAD and QUATRO LNBs
• Output power: 8 x +5 dBm
• Connector type SC/APC
• WDM technology (all signals in 1 fibre)
• AGC - automatic gain control to stabilise the signal level
• LEDs for easy diagnostics
• Single-mode fibre optic transmission
• Maximum signal splitting up to 16 QUATRO REC-109 receivers
• Input type: 2xQUATRO + radio/DVB-T2
• Compatible with QUAD and QUATRO LNBs
• Output power: 8 x +5 dBm
• Connector type SC/APC
• WDM technology (all signals in 1 fibre)
• AGC - automatic gain control to stabilise the signal level
• LEDs for easy diagnostics
• Single-mode fibre optic transmission
• Maximum signal splitting up to 16 QUATRO REC-109 receivers
The REC-109 optical receiver enables the conversion of the optical signal from the TR-901 transmitter into an electrical signal. Output type 2xQUATRO + radio/DVB-T2.
• 2xQUATRO + radio/DVB-T2 type output
• Compatible with TR-901 SIGNAL PRO optical transmitter
• Built-in AGC circuit, which ensures signal stability at the output of the device
• Supported wavelengths: 1330-1570 nm
• Conversion of optical signal to full bandwidth 2x SAT IF (VL/VH/HL/HH) in QUATRO system and radio/DVB-T2 signals
• High noise immunity and stable operation over a wide input power range
• High sensitivity for multi-point installations
• SC/APC optical connector
• Compatible with TR-901 SIGNAL PRO optical transmitter
• Built-in AGC circuit, which ensures signal stability at the output of the device
• Supported wavelengths: 1330-1570 nm
• Conversion of optical signal to full bandwidth 2x SAT IF (VL/VH/HL/HH) in QUATRO system and radio/DVB-T2 signals
• High noise immunity and stable operation over a wide input power range
• High sensitivity for multi-point installations
• SC/APC optical connector
The FTTH OD-012 H optical receiver (SC/APC optical connector) is designed to convert optical signals into electrical signals in the 47-862/1006 MHz band.
• Optical connector: SC/APC
• Open housing for high screening efficiency
• Output bandwidth 47-862/1006 MHz
• Microprocessor-based AGC (automatic gain control) based on optical signal level
• Range of signal level at optical input: -9...2 dBm
• Maximum output level: 108 dBµV
• Open housing for high screening efficiency
• Output bandwidth 47-862/1006 MHz
• Microprocessor-based AGC (automatic gain control) based on optical signal level
• Range of signal level at optical input: -9...2 dBm
• Maximum output level: 108 dBµV
The OD-004A optical node (SC/APC optical connector) is designed to convert an optical signal into an electrical signal in the 47-2400 MHz band.
• Compact dimensions
• Output bandwidth 47-2400 MHz
• Microprocessor-based AGC (automatic gain control) based on optical signal level
• Connector: optical: SC/APC
• Output bandwidth 47-2400 MHz
• Microprocessor-based AGC (automatic gain control) based on optical signal level
• Connector: optical: SC/APC
The OD-003 optical node (SC/APC optical connector) is designed to convert an optical signal into an electrical signal in the 47-1002 MHz band.
• Compact size
• Expanded output bandwidth 47-1002 MHz
• Very high sensitivity: -10...3 dBm
• Microprocessor-based automatic gain control (AGC)
• Maximum output signal level: 80 dBμV
• LED display
• Connectors: optical - SC/APC
• Expanded output bandwidth 47-1002 MHz
• Very high sensitivity: -10...3 dBm
• Microprocessor-based automatic gain control (AGC)
• Maximum output signal level: 80 dBμV
• LED display
• Connectors: optical - SC/APC
The OD-005P optical receiver (SC/APC optical connector) is designed to convert an optical signal into an electrical signal in the 47-862 MHz band.
• Compact size
• Die-cast housing provides high efficiency shielding to prevent interfering signals from penetrating inside the unit
• Output bandwidth 47-862 MHz
• Sensitivity -6 ... 0 dBm
• Maximum output level 107 dBμV
• Microprocessor-based AGC (automatic gain control) based on signal level
• Die-cast housing provides high efficiency shielding to prevent interfering signals from penetrating inside the unit
• Output bandwidth 47-862 MHz
• Sensitivity -6 ... 0 dBm
• Maximum output level 107 dBμV
• Microprocessor-based AGC (automatic gain control) based on signal level
The OD-006 compact optical receiver (SC/APC optical connector) is designed to convert an optical signal into an electrical signal in the 47-1006 MHz band.
• Compact-size (7 cm long) optical DVB-T/DVB-C receiver
• Die-cast housing providing high screening efficiency by preventing the penetration of interfering signals to the unit
• Output RF range: 47-1006 MHz
• Sensitivity: -6...0 dBm
• Max output level: 80 dBμV
• AGC based on optical input level
• Die-cast housing providing high screening efficiency by preventing the penetration of interfering signals to the unit
• Output RF range: 47-1006 MHz
• Sensitivity: -6...0 dBm
• Max output level: 80 dBμV
• AGC based on optical input level
