EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
SIGNAL PRO optical transmitter TR-501 is used for the transmission of RTV/SAT signals using optical fibre technology. Input type 1xQUATRO + radio/DVB-T2.
• Conversion of DVB-S/S2 (1 satellite position) and radio/DVB-T2 signals
• Input type 1xQUATRO + radio/DVB-T2
• Compatible with QUAD or QUATRO converter
• Output power 4 x +3 dBm
• Connector type SC/APC
• WDM technology (all signals in 1 fibre)
• AGC - automatic gain control stabilising signal level
• LEDs for easy diagnostics
• Single-mode fibre optic transmission
• Maximum signal splitting up to 16 QUATRO REC-105 receivers
• Input type 1xQUATRO + radio/DVB-T2
• Compatible with QUAD or QUATRO converter
• Output power 4 x +3 dBm
• Connector type SC/APC
• WDM technology (all signals in 1 fibre)
• AGC - automatic gain control stabilising signal level
• LEDs for easy diagnostics
• Single-mode fibre optic transmission
• Maximum signal splitting up to 16 QUATRO REC-105 receivers
The REC-105 optical receiver enables the conversion of the optical signal from the TR-901 transmitter into an electrical signal. Output type 1xQUATRO + radio/DVB-T2.
• Output type 1xQUATRO + radio/DVB-T2
• Compatible with TR-501 SIGNAL PRO optical transmitter
• Built-in AGC circuit, which ensures signal stability at the output of the device
• Supported wavelengths: 1550-1570 nm
• Conversion of optical signal to full band 1x SAT IF (VL/VH/HL/HH) in QUATRO circuit and radio/DVB-T2 signals
• High noise immunity and stable operation over a wide input power range
• High sensitivity for multi-point installations
• SC/APC optical connector
• Compatible with TR-501 SIGNAL PRO optical transmitter
• Built-in AGC circuit, which ensures signal stability at the output of the device
• Supported wavelengths: 1550-1570 nm
• Conversion of optical signal to full band 1x SAT IF (VL/VH/HL/HH) in QUATRO circuit and radio/DVB-T2 signals
• High noise immunity and stable operation over a wide input power range
• High sensitivity for multi-point installations
• SC/APC optical connector
The TR-901 SIGNAL PRO optical transmitter is used for the transmission of RTV/SAT signals using optical fibre technology. Input type 2xQUATRO + radio/DVB-T2.
• Conversion of DVB-S/S2 (2 satellite positions) and radio/DVB-T2 signals
• Input type: 2xQUATRO + radio/DVB-T2
• Compatible with QUAD and QUATRO LNBs
• Output power: 8 x +5 dBm
• Connector type SC/APC
• WDM technology (all signals in 1 fibre)
• AGC - automatic gain control to stabilise the signal level
• LEDs for easy diagnostics
• Single-mode fibre optic transmission
• Maximum signal splitting up to 16 QUATRO REC-109 receivers
• Input type: 2xQUATRO + radio/DVB-T2
• Compatible with QUAD and QUATRO LNBs
• Output power: 8 x +5 dBm
• Connector type SC/APC
• WDM technology (all signals in 1 fibre)
• AGC - automatic gain control to stabilise the signal level
• LEDs for easy diagnostics
• Single-mode fibre optic transmission
• Maximum signal splitting up to 16 QUATRO REC-109 receivers
The REC-109 optical receiver enables the conversion of the optical signal from the TR-901 transmitter into an electrical signal. Output type 2xQUATRO + radio/DVB-T2.
• 2xQUATRO + radio/DVB-T2 type output
• Compatible with TR-901 SIGNAL PRO optical transmitter
• Built-in AGC circuit, which ensures signal stability at the output of the device
• Supported wavelengths: 1330-1570 nm
• Conversion of optical signal to full bandwidth 2x SAT IF (VL/VH/HL/HH) in QUATRO system and radio/DVB-T2 signals
• High noise immunity and stable operation over a wide input power range
• High sensitivity for multi-point installations
• SC/APC optical connector
• Compatible with TR-901 SIGNAL PRO optical transmitter
• Built-in AGC circuit, which ensures signal stability at the output of the device
• Supported wavelengths: 1330-1570 nm
• Conversion of optical signal to full bandwidth 2x SAT IF (VL/VH/HL/HH) in QUATRO system and radio/DVB-T2 signals
• High noise immunity and stable operation over a wide input power range
• High sensitivity for multi-point installations
• SC/APC optical connector
