EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
The OTM302T optical transmitter is used to create fiber optic RF/SAT systems and the implementation of transmissions at a wavelength of 1310 nm.
• FP laser
• 1310 nm wavelength
• +6 dBm optical output power
• Built-in RF converter
• Die-cast housing guarantees high level of screening – class A
• AGC – automatic gain control stabilizes the signal level
• LEDs on the housing make it much easier to properly configure the entire system
• 1310 nm wavelength
• +6 dBm optical output power
• Built-in RF converter
• Die-cast housing guarantees high level of screening – class A
• AGC – automatic gain control stabilizes the signal level
• LEDs on the housing make it much easier to properly configure the entire system
The OTF302 6F31 E TERRA optical transmitter is used to create TV/SAT systems using optical fibre technology and transmission at 1310 nm wavelength (transmission window II).
• FP type laser
• Wavelength 1310 nm
• Power at optical output +6 dBm
• Open housing ensuring high level of shielding – class A
• AGC – automatic gain control stabilizing signal level
• LEDs on the housing for much easier configuration of the entire system
• Wavelength 1310 nm
• Power at optical output +6 dBm
• Open housing ensuring high level of shielding – class A
• AGC – automatic gain control stabilizing signal level
• LEDs on the housing for much easier configuration of the entire system
The ORQ302 E optical receiver allows the conversion of the optical signal coming from the OTF302 6F31 E A3031 or OTF302 6F55 E A3055 transmitter into an electrical signal. QUATRO + DVB-T2 type output.
• Wavelength 1100...1650 nm
• Acceptable power level at optical input -15...-5 dBm
• Open casing guaranteeing high level of shielding - class A
• OLC - automatic control to stabilise signal level
• LEDs on the casing greatly facilitating proper configuration of the whole system
• DC power supply is provided directly from the connected multiswitch or from an external DC 10...20 V power supply, which is not standard equipment
• Acceptable power level at optical input -15...-5 dBm
• Open casing guaranteeing high level of shielding - class A
• OLC - automatic control to stabilise signal level
• LEDs on the casing greatly facilitating proper configuration of the whole system
• DC power supply is provided directly from the connected multiswitch or from an external DC 10...20 V power supply, which is not standard equipment
The ORD301F E optical receiver allows the conversion of the optical signal coming from the OTF302 6F31 E or OTF302 6F55 E transmitter into an electrical signal
• Wavelength 1100...1650 nm
• Acceptable power level at the optical input -15...-5 dBm
• Open housing ensuring high level of shielding – class A
• OLC – automatic control stabilizing signal level
• Acceptable power level at the optical input -15...-5 dBm
• Open housing ensuring high level of shielding – class A
• OLC – automatic control stabilizing signal level
The ORL302F E optical receiver enables the conversion of optical signals into Legacy, Wideband and Radio/DVB-T2 electrical signals.
• Wavelength 1100...1650 nm
• Acceptable power level at the optical input -15...-5 dBm
• Open casing to ensure a high level of shielding – class A
• OLC - automatic control to stabilize the signal level
• LEDs on the casing greatly facilitating the proper configuration of the entire system
• Acceptable power level at the optical input -15...-5 dBm
• Open casing to ensure a high level of shielding – class A
• OLC - automatic control to stabilize the signal level
• LEDs on the casing greatly facilitating the proper configuration of the entire system
The optical SAT/RTV OTX 1310 KIT from TRIAX allows the introduction of DVB-S/S2 satellite signals and DVB-T2 digital terrestrial TV, DAB radio and FM radio into a fibre optic installation.
• Fiber optic cabling
• One fiber optic cable instead of 5 or 9 cable bus
• Wideband LNB dedicated for satellite installation
• One fiber optic cable instead of 5 or 9 cable bus
• Wideband LNB dedicated for satellite installation
The QUATRO converter has been designed for output replication of satellite IF signals and DVB-T/T2 and FM/DAB digital terrestrial TV antennas. It is powered from a multiswitch.
• Receiver works with TOU 232 KIT and LNB TOL32
• Converts optical signal to electrical signal (4x SAT + DVB-T)
• Sensitivity: -15...0 dBm
• Converts optical signal to electrical signal (4x SAT + DVB-T)
• Sensitivity: -15...0 dBm
The QUAD converter has been designed for output replication of satellite IF signals and DVB-T/T2 and FM/DAB digital terrestrial antennas.
• Receiver works with TOU 232 KIT and LNB TOL32
• Converts optical signal to electrical signal (4x SAT + DVB-T)
• Sensitivity: -15...0 dBm
• Converts optical signal to electrical signal (4x SAT + DVB-T)
• Sensitivity: -15...0 dBm
FOS 102 E optical splitter is an element used to divide the optical signal into 2 paths.
• Dividing the signal into 2 paths
• FC/PC sockets
• Box type housing
• Attenuation of 3.9 dB
• FC/PC sockets
• Box type housing
• Attenuation of 3.9 dB
FOS 104 E optical splitter is an element used to divide the optical signal into 4 paths.
• Dividing the signal into 4 paths
• FC/PC sockets
• Box type housing
• Attenuation of 7.4 dB
• FC/PC sockets
• Box type housing
• Attenuation of 7.4 dB
FOS 108 E optical splitter is an element used to divide the optical signal into 8 paths.
• Dividing the signal into 8 paths
• FC/PC sockets
• Box type housing
• Attenuation of 10.8 dB
• FC/PC sockets
• Box type housing
• Attenuation of 10.8 dB
SIGNAL PRO optical transmitter TR-501 is used for the transmission of RTV/SAT signals using optical fibre technology. Input type 1xQUATRO + radio/DVB-T2.
• Conversion of DVB-S/S2 (1 satellite position) and radio/DVB-T2 signals
• Input type 1xQUATRO + radio/DVB-T2
• Compatible with QUAD or QUATRO converter
• Output power 4 x +3 dBm
• Connector type SC/APC
• WDM technology (all signals in 1 fibre)
• AGC - automatic gain control stabilising signal level
• LEDs for easy diagnostics
• Single-mode fibre optic transmission
• Maximum signal splitting up to 16 QUATRO REC-105 receivers
• Input type 1xQUATRO + radio/DVB-T2
• Compatible with QUAD or QUATRO converter
• Output power 4 x +3 dBm
• Connector type SC/APC
• WDM technology (all signals in 1 fibre)
• AGC - automatic gain control stabilising signal level
• LEDs for easy diagnostics
• Single-mode fibre optic transmission
• Maximum signal splitting up to 16 QUATRO REC-105 receivers
The REC-105 optical receiver enables the conversion of the optical signal from the TR-901 transmitter into an electrical signal. Output type 1xQUATRO + radio/DVB-T2.
• Output type 1xQUATRO + radio/DVB-T2
• Compatible with TR-501 SIGNAL PRO optical transmitter
• Built-in AGC circuit, which ensures signal stability at the output of the device
• Supported wavelengths: 1550-1570 nm
• Conversion of optical signal to full band 1x SAT IF (VL/VH/HL/HH) in QUATRO circuit and radio/DVB-T2 signals
• High noise immunity and stable operation over a wide input power range
• High sensitivity for multi-point installations
• SC/APC optical connector
• Compatible with TR-501 SIGNAL PRO optical transmitter
• Built-in AGC circuit, which ensures signal stability at the output of the device
• Supported wavelengths: 1550-1570 nm
• Conversion of optical signal to full band 1x SAT IF (VL/VH/HL/HH) in QUATRO circuit and radio/DVB-T2 signals
• High noise immunity and stable operation over a wide input power range
• High sensitivity for multi-point installations
• SC/APC optical connector
The TR-901 SIGNAL PRO optical transmitter is used for the transmission of RTV/SAT signals using optical fibre technology. Input type 2xQUATRO + radio/DVB-T2.
• Conversion of DVB-S/S2 (2 satellite positions) and radio/DVB-T2 signals
• Input type: 2xQUATRO + radio/DVB-T2
• Compatible with QUAD and QUATRO LNBs
• Output power: 8 x +5 dBm
• Connector type SC/APC
• WDM technology (all signals in 1 fibre)
• AGC - automatic gain control to stabilise the signal level
• LEDs for easy diagnostics
• Single-mode fibre optic transmission
• Maximum signal splitting up to 16 QUATRO REC-109 receivers
• Input type: 2xQUATRO + radio/DVB-T2
• Compatible with QUAD and QUATRO LNBs
• Output power: 8 x +5 dBm
• Connector type SC/APC
• WDM technology (all signals in 1 fibre)
• AGC - automatic gain control to stabilise the signal level
• LEDs for easy diagnostics
• Single-mode fibre optic transmission
• Maximum signal splitting up to 16 QUATRO REC-109 receivers
The REC-109 optical receiver enables the conversion of the optical signal from the TR-901 transmitter into an electrical signal. Output type 2xQUATRO + radio/DVB-T2.
• 2xQUATRO + radio/DVB-T2 type output
• Compatible with TR-901 SIGNAL PRO optical transmitter
• Built-in AGC circuit, which ensures signal stability at the output of the device
• Supported wavelengths: 1330-1570 nm
• Conversion of optical signal to full bandwidth 2x SAT IF (VL/VH/HL/HH) in QUATRO system and radio/DVB-T2 signals
• High noise immunity and stable operation over a wide input power range
• High sensitivity for multi-point installations
• SC/APC optical connector
• Compatible with TR-901 SIGNAL PRO optical transmitter
• Built-in AGC circuit, which ensures signal stability at the output of the device
• Supported wavelengths: 1330-1570 nm
• Conversion of optical signal to full bandwidth 2x SAT IF (VL/VH/HL/HH) in QUATRO system and radio/DVB-T2 signals
• High noise immunity and stable operation over a wide input power range
• High sensitivity for multi-point installations
• SC/APC optical connector
The FTTH OD-012 H optical receiver (SC/APC optical connector) is designed to convert optical signals into electrical signals in the 47-862/1006 MHz band.
• Optical connector: SC/APC
• Open housing for high screening efficiency
• Output bandwidth 47-862/1006 MHz
• Microprocessor-based AGC (automatic gain control) based on optical signal level
• Range of signal level at optical input: -9...2 dBm
• Maximum output level: 108 dBµV
• Open housing for high screening efficiency
• Output bandwidth 47-862/1006 MHz
• Microprocessor-based AGC (automatic gain control) based on optical signal level
• Range of signal level at optical input: -9...2 dBm
• Maximum output level: 108 dBµV
The OD-004A optical node (SC/APC optical connector) is designed to convert an optical signal into an electrical signal in the 47-2400 MHz band.
• Compact dimensions
• Output bandwidth 47-2400 MHz
• Microprocessor-based AGC (automatic gain control) based on optical signal level
• Connector: optical: SC/APC
• Output bandwidth 47-2400 MHz
• Microprocessor-based AGC (automatic gain control) based on optical signal level
• Connector: optical: SC/APC
The OD-003 optical node (SC/APC optical connector) is designed to convert an optical signal into an electrical signal in the 47-1002 MHz band.
• Compact size
• Expanded output bandwidth 47-1002 MHz
• Very high sensitivity: -10...3 dBm
• Microprocessor-based automatic gain control (AGC)
• Maximum output signal level: 80 dBμV
• LED display
• Connectors: optical - SC/APC
• Expanded output bandwidth 47-1002 MHz
• Very high sensitivity: -10...3 dBm
• Microprocessor-based automatic gain control (AGC)
• Maximum output signal level: 80 dBμV
• LED display
• Connectors: optical - SC/APC
The OD-005P optical receiver (SC/APC optical connector) is designed to convert an optical signal into an electrical signal in the 47-862 MHz band.
• Compact size
• Die-cast housing provides high efficiency shielding to prevent interfering signals from penetrating inside the unit
• Output bandwidth 47-862 MHz
• Sensitivity -6 ... 0 dBm
• Maximum output level 107 dBμV
• Microprocessor-based AGC (automatic gain control) based on signal level
• Die-cast housing provides high efficiency shielding to prevent interfering signals from penetrating inside the unit
• Output bandwidth 47-862 MHz
• Sensitivity -6 ... 0 dBm
• Maximum output level 107 dBμV
• Microprocessor-based AGC (automatic gain control) based on signal level
The OD-006 compact optical receiver (SC/APC optical connector) is designed to convert an optical signal into an electrical signal in the 47-1006 MHz band.
• Compact-size (7 cm long) optical DVB-T/DVB-C receiver
• Die-cast housing providing high screening efficiency by preventing the penetration of interfering signals to the unit
• Output RF range: 47-1006 MHz
• Sensitivity: -6...0 dBm
• Max output level: 80 dBμV
• AGC based on optical input level
• Die-cast housing providing high screening efficiency by preventing the penetration of interfering signals to the unit
• Output RF range: 47-1006 MHz
• Sensitivity: -6...0 dBm
• Max output level: 80 dBμV
• AGC based on optical input level
The OD-007 H compact optical receiver (SC/APC optical connector) is designed to convert an optical signal into an electrical signal in the 47-2400 MHz band.
• Compact size
• Remotely powered from a 10 V...20 V / 60 mA source
• Die-cast housing providing high screening efficiency by preventing the penetration of interfering signals to the unit
• Output RF range: 47-2400 MHz
• AGC based on optical input level
• Optical connector: SC/APC
• Remotely powered from a 10 V...20 V / 60 mA source
• Die-cast housing providing high screening efficiency by preventing the penetration of interfering signals to the unit
• Output RF range: 47-2400 MHz
• AGC based on optical input level
• Optical connector: SC/APC
The mo418 4D31 optical transmitter with a power of 1x6 dBm is used to transmit RTV/SAT TV signals using the optical fibre medium for wavelengths of 1310 nm.
• The transmitter allows the distribution of DVB-S/S2 and CATV signals
• Input frequency range: 47-2400 MHz
• Optical output power 6 dBm
• AGC function (automatic gain control)
• Digitally programmable with buttons located on the front panel
• Two-position display
• Multiple mounting options (DIN rail, façade)
• Connectors: 3xRF - input/output and test output - type F, 1x optical - SC/APC
• Input frequency range: 47-2400 MHz
• Optical output power 6 dBm
• AGC function (automatic gain control)
• Digitally programmable with buttons located on the front panel
• Two-position display
• Multiple mounting options (DIN rail, façade)
• Connectors: 3xRF - input/output and test output - type F, 1x optical - SC/APC
The mo428 4D31 optical transmitter with a power of 2x6 dBm is used for the transmission of RTV/SAT TV signals using the optical fibre medium for wavelengths of 1310 nm.
• The transmitter allows the distribution of DVB-S/S2 and CATV signals
• Input frequency range: 47-2400 MHz
• Optical output power 2x6 dBm
• AGC function (automatic control of signal amplification)
• Digitally programmable with buttons located on the front panel
• Two-position display
• Multiple mounting options (DIN rail, façade)
• Connectors: 3xRF - input/output and test output - type F, 2x optical - SC/APC
• Input frequency range: 47-2400 MHz
• Optical output power 2x6 dBm
• AGC function (automatic control of signal amplification)
• Digitally programmable with buttons located on the front panel
• Two-position display
• Multiple mounting options (DIN rail, façade)
• Connectors: 3xRF - input/output and test output - type F, 2x optical - SC/APC
The mo418 4F31 TERRA optical transmitter is designed for transmitting TV signals via fiber optic medium.
• Transmitter enables distribution of DVB-S/S2 and CATV signals
• Laser type - FP (Fabry-Perot)
• Input frequency range: 47-2400 MHz
• RF signal loop input
• AGC function (automatic signal gain control)
• Maximum input level: 85 dBμV
• Input level adjustment 0...-15 dB in 1 dB steps
• Device programmable digitally using buttons located on the front panel
• Two-position display
• Several mounting options (DIN rail, facade)
• Connectors: 3xRF: input/output and test output - type F, 1x optical - SC/APC
• Laser type - FP (Fabry-Perot)
• Input frequency range: 47-2400 MHz
• RF signal loop input
• AGC function (automatic signal gain control)
• Maximum input level: 85 dBμV
• Input level adjustment 0...-15 dB in 1 dB steps
• Device programmable digitally using buttons located on the front panel
• Two-position display
• Several mounting options (DIN rail, facade)
• Connectors: 3xRF: input/output and test output - type F, 1x optical - SC/APC
