A typical antenna has symmetrical output of 300 ohm impedance, while coaxial cable is unsymmetrical load of 75 ohm impedance. This is why an impedance transformer must be used. The antenna impedance transformer is passive RF device which both transforms the impedance and adjusts the output to standa...
A typical antenna has a balanced output with 300 ohm impedance, while a coaxial cable is an unbalanced load with 75 ohm impedance. So, an impedance transformer (often called balun) must be used. A balun is a passive device which uses a transformer to change the impedance and character of the output ...
Antenna balun C0003, channels 6-48
• Input channels 6-48
• Input impedance: 300Ω
• Output impedance: 75Ω
• Attenuation < 1.5 dB
• Input impedance: 300Ω
• Output impedance: 75Ω
• Attenuation < 1.5 dB
A typical antenna has a balanced output of 300 Ohm impedance ratio, while a coaxial cable is an imbalanced load of 75 Ohm impedance. This is why an indirect connection must be created to fit an antenna with a coaxial cable: an impedance transformer must be used. An impedance transformer is a passive...
Antenna impedance transformer C0006, channels 21-48, F-connector
• Input channels 21-48
• Input impedance: 300 Ohm
• Output impedance: 75 Ohm
• Attenuation < 1.5 dB
• F connector
• Input impedance: 300 Ohm
• Output impedance: 75 Ohm
• Attenuation < 1.5 dB
• F connector
