English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
The TV outlet has been designed for flush mount applications. The distribution of RF signal is carried out by the angle F-f to F-f adapter embedded in the housing. A coaxial cable carrying the RF signal, terminated with F plug, is to be screwed on to the rear part of the adapter.
Due to a modular housing, the outlet can be surface or flush mounted, as well as installed in a frame. Distribution of the RF signal is carried out by the F-f to F-f adapter screwed into the central part of the housing. Before installation, the adapter has to be unscrewed. The connection of the RF c...
GIS-F1-1/P P/T flush-mounted socket for individual television installations.
• A socket at the end of the television installation
• Recessed installation
• Two F-type connectors
• Possibility of connecting any TV signal
• Easy and quick assembly
• Recessed installation
• Two F-type connectors
• Possibility of connecting any TV signal
• Easy and quick assembly
The TV outlet has been designed for surface mount applications. The distribution of RF signals is carried out by the angle F-f to F-f adapters embedded in the housing. Coaxial cables carrying RF signals, terminated with F plugs, are to be screwed on to the rear parts of the two adapters.
• Two paths
• Angle F-f to F-f adapters
• Flush-mount design
• Angle F-f to F-f adapters
• Flush-mount design
This housing is designed for surface mount or for use within frames. Distribution of the RF signal is carried out by F-type sockets embedded in the housing. The connection of the RF cable coming from satellite dish (LNB), receiver or accessories is made with F-plug screwed on the cable tip, which is...
• End-of-line TV outlet
• Surface-mounted
• Two F connectors
• Compatible with SAT and terrestrial TV signals
• Easy to mount
• Surface-mounted
• Two F connectors
• Compatible with SAT and terrestrial TV signals
• Easy to mount
This housing is designed for flush mount (inside cable box). Distribution of the RF signal is carried out by F-type sockets embedded in the housing. The connection of the RF cable coming from satellite dish (LNB), receiver or accessories is made with F-plug screwed on the cable tip, which is then sc...
The GAR-BG-DK-SAT subscriber outlet is a piece of equipment designed for using within satellite master antenna systems (SMATV) and satellite antenna individual installations (SAII). Between the SAT output and input there is transition of DC and LF current, which enables to power and control LNB(s) s...
• New! - antenna outlet dedicated for multiswitch systems
• F-type connectors
• SAT path loss of 2 dB
• High screening efficiency (85 dB)
• F-type connectors
• SAT path loss of 2 dB
• High screening efficiency (85 dB)
