Ethernet Media Converter: ULTIMODE M-102M/SFP - CLEARANCE SALE!

Code: L1305
This product is no longer available
Estore: Library:

Support

Details

ULTIMODE M-102M/SFP media converter with SFP slot enables conversion of electrical signals (Ethernet data) coming via typical STP/UTP cable into modulated light signal transmitted via fiber optic cable.
Media converter ULTIMODE M-102M/SFP will be ready for operation after installing
a 100Base-FX compliant SFP module.
Ethernet Media Converter: ULTIMODE M-102M/SFP - CLEARANCE SALE!
View of the media converter
Ethernet Media Converter: ULTIMODE M-102M/SFP - CLEARANCE SALE!
Opposite side view
Ethernet Media Converter: ULTIMODE M-102M/SFP - CLEARANCE SALE!
View of the included AC/DC adapter
Distinguishing features:
  • 1 x 10/100 Mb/s Ethernet port (RJ-45)
  • SFP slot (100Base-FX)
  • LEDs indicating operation status
  • easy installation (plug and play)
  • external AC/DC adapter included
ULTIMODE M-102M/SFP media converter equipped with SFP slot allows for cooperation with multimode or single-mode optical fibers, depending on the module installed. All optical transmission parameters depend on the SFP module. ULTIMODE M-102M/SFP can cooperate with SFP modules compliant with 100Base-FX standard.
ULTIMODE devices have MDI/MDIX auto detection feature and automatically find and set the fastest connection speed and mode. "Store and forward" mechanism allows to verify the received data using checksum function.
ULTIMODE M-102M/SFP is fully compatible with 10Base-T and 100Base-TX standards. Their installation is very simple thanks to "Plug and Play" feature. The LED indicators show current operating status.
Thanks to interchangeable SFP modules, the device can be used in multimode optical networks for data transmission over two optical fibers (duplex) or in single-mode networks using WDM or CWDM transmission (simplex). The solution is especially cost effective when planning future expansion/modernization of the network (it is sufficient to exchange only the SFP module).
Specifications:
Name: ULTIMODE M-102M/SFP
Code: L1305
Standards: IEEE 802.3, IEEE 802.3u
LAN port: 10/100Base - TX
RJ-45 UTP/STP, cat 3, 4, 5, max. 100 m
Optical port: SFP (100Base-FX)
Transmission speed: Depends on SFP module
Power: 5VDC/1A (AC/DC adapter incl.)
Operating temperature range: 0...60oC
NOTICE!! It is not allowed to look directly at the fiber port when the device is plugged. The radiation invisible for the human eye can damage the retina!
Media converter M-102M/SFP is compliant with 100Base-FX standard, which enables the device to cooperate with Fast Ethernet SFP modules. We offer such SFP transceivers:
  • ULTIMODE SFP-011M (2xLC, two multimode fibers up to 550 m) - L1401,
  • ULTIMODE SFP-203M (2xLC, two single-mode fibers up to 20 km) - L1411.
ULTIMODE M-102M/SFP does not cooperate with GbE SFP modules
Why to choose fiber optics:
  • possibility of sending signal over long distances (low attenuation of optical fibers - e.g. for the wavelength of 1550 nm the attenuation is about 0.2 dB per kilometer, which means that the signal can be sent at a distance of 200 km - without regeneration)
  • high-volume information transfer via single fiber
  • resistance to electromagnetic interference
  • resistance to weather conditions (humidity, electrostatic discharges and others)
  • no tapping possibility
  • low weight and small dimensions

Specifications

Nazwa: ULTIMODE M-102M/SFP
Kod: L1305
Standardy: IEEE 802.3, IEEE 802.3u
Port LAN: 10/100Base - TX
RJ-45 UTP/STP, kat 3, 4, 5, max. 100m
Port optyczny: SFP (100Base-FX)
Szybkość transmisji: zależna od modułu SFP
Zasilanie: DC 5V/1A
Temperatura pracy: 0... 60oC