English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
€75.06
| Price | Disc. | Quantity | Validity |
|---|---|---|---|
| €75.06 | 0 % | from 1 piece |
Available
ULTIMODE M-207G media converter set allows to change the transmission medium from twisted pair STP/UTP to single mode fiber and vice versa.
• Ethernet transmission 10/100/1000 Mbps
• WDM transmission: 1 single mode fiber
• Wavelength 1310/1550 nm
• Max transmission distance: 20 km
• LEDs indicating the correct operation of the device
• Very easy installation (plug and play)
• Power supply included
• WDM transmission: 1 single mode fiber
• Wavelength 1310/1550 nm
• Max transmission distance: 20 km
• LEDs indicating the correct operation of the device
• Very easy installation (plug and play)
• Power supply included
Details
ULTIMODE M-207G media converter set allows to change electrical signals (Ethernet data) coming via typical UTP/FTP cables into modulated light signal transmitted via a single strand of a single-mode fiber cable.
ULTIMODE M-207G is reliable media converter set enabling the transmission of Ethernet data in one single-mode optical fiber at distances up to 20 km. Each of the two media converters has one SC connector used to transmit (Tx) or receive (Rx) the signal. It is possible due to the use of wavelength-division multiplexing technology (WDM) - different wavelengths of laser light carry different signals, over one strand of fiber. It significantly lowers installation costs. The L11525 set contains two transceivers and two power supplies (5 VDC / 2A).
One of the devices transmits optical signal in the III transmission window (1550 nm), whereas the second uses the II window (1310 nm). Sensitivity of the receiver and output power of the transmitter is adapted to transmit information up to 20 km. In the case of shorter distances (up to 2 km), it is required to use additional 2dB attenuators by the receivers. They will protect them against "burning".
ULTIMODE devices have MDI/MDIX auto detection feature and automatically find and set the fastest connection speed and mode. "Store and forward" mechanism allows to verify the received data using checksum function.
ULTIMODE media converters are fully compatible with IEEE 802.3 and IEEE 802.3u standards. Their installation is very simple thanks to "Plug and Play" feature. The LED indicators show current operating status. Durable laser diode with Fabry-Perot resonator ensures the mean-time-between-failure (MTBF) at least of 100.000 hours (more than 11 years).
When a ULTIMODE device does not cooperate with a switch coming from another manufacturer (e.g. TP-Link), the Duplex parameter of the optical port in the incompatible device should be set to AUTO.
Distinguishing features:
- 1 x Ethernet port 10/100/1000 Mbps (RJ-45)
- maximum transmission distance - 20 km
- transmission via one single-mode fiber (WDM)
- LED indicators showing operating status
- easy installation (plug and play)
- the set contains 2 transceivers and 2 power supplies
NOTICE!! It is not allowed to look directly at the fiber port when the device is plugged. The radiation invisible for the human eye can damage the retina!
Why to choose fiber optics:
- possibility of sending signal over long distances (low attenuation of optical fibers - e.g. for the wavelength of 1550 nm the attenuation is about 0.2 dB per kilometer, which means that the signal can be sent at a distance of 200km - without regeneration)
- high-volume information transfer via single fiber
- resistance to electromagnetic interference
- resistance to weather conditions (humidity, electrostatic discharges and others)
- no tapping possibility
- low weight and small dimensions
ULTIMODE media converters are widely used for the transmission of Ethernet signals over long distances and in areas exposed to harsh weather conditions. Optical fibers provide full electrical insulation and resistance to electromagnetic interference. Media converters are primarily used to connect building LANs (e.g. of scattered buildings of one corporation). Below there is a sample application of ULTIMODE converters.
The devices are designed for indoor operation. The ULTIMODE series includes a number of types:
Specifications
| Product type | Media converter | ||
| Brand | ULTIMODE | ||
| Name | M-207G | ||
| Interfejs optyczny | |||
| Transmission type | WDM – 1 fiber | ||
| Fiber optic type | Single-mode | ||
| Optical interface speed | MBps | 1000 | |
| Type of optical interface connector | SC/PC simplex | ||
| Transmission range | km | 20 | |
| wavelength | Tx | nm | 1310/1550 |
| Rx | nm | 1550/1310 | |
| Transmitter power | dBm | -8...-5 | |
| Receiver sensitivity | dBm | > -22 | |
| Interfejs Ethernet | |||
| Ethernet port | number | pcs. | 1 |
| speed | MBps | 10/100/1000 | |
| connector type | RJ45 | ||
| Others | |||
| LEDs | PWR, 1000M, Link Act, FDX, SD | ||
| Power supply | voltage | DCV | 5 |
| Current capacity | A | 2 | |
| Operating temperature | °C | 0...+50 | |
| Dimensions | mm | 97 × 73 × 27 | |
![CAT 5e FTP Shielded Cable: NETSET BOX F/UTP 5e [305m], indoor](https://www.dipol.sk/img/thumbnails/e1515_305+.jpg/38b1eca8e5019a9912871f4792ea3eb6.jpg)
