Ethernet Media Converter ULTIMODE M-207M (one single-mode fiber up to 20km)

Widok kompletu media konwerterów ULTIMODE M-207M

Widok przedniego panelu media konwerterów ULTIMODE M-207M

Widok tylnego panelu media konwerterów ULTIMODE M-207M

Code: L11521

€37.53

Price	Disc.	Quantity	Validity
€37.53	0 %	from 1 piece

Available

Ethernet media converter ULTIMODE M-207M allows to change electrical signals (Ethernet data) coming via typical STP/UTP cable into modulated light signal transmitted via one single-mode fiber...

• Designed for use in IP CCTV and other broadband systems, needs only a single SM fiber (WDM transmission)
• Long maximum transmission distance: 20 km
• 10/100 Mbps Ethernet port (RJ-45)
• The set contains 2 transceivers and power supplies

Estore: Media converters Library: Some Theory (6), Connectors & Splicing (7), Measurements (2), Building System (6), CCTV Video Transm. (3), CATV/SMATV Distribution (3).

100% Availability

We offer products available from our stock.

Fast shipping

We ship immediately, according to the order of purchases.

Warranty

3-year warranty.

Support

Any questions or comments?

Write to us!

Details

Ethernet media converter ULTIMODE M-207M allows to change electrical signals (Ethernet data stream) coming via typical STP/UTP cable into modulated light signal transmitted via one single-mode fiber.

ULTIMODE M-207M is reliable media converter set enabling the transmission of Fast Ethernet data in one single-mode optical fibers at distances up to 20 km. The media converter has one SC connector used to transmit or receive optical signal. It is possible due to the use of wavelength-division multiplexing technology (WDM) - different wavelengths of laser light carry different signals, over one strand of fiber. It significantly lowers installation costs. The L11521 set contains 2 transceivers and power supplies (5 VDC / 2 A).

One of the devices transmits optical signal in the III transmission window (1550 nm), whereas the second uses the II window (1310 nm). Sensitivity of the receiver and output power of the transmitter are adapted to transmit information up to 20 km. In the case of shorter distances (up to 2 km), it is required to use additional 2dB attenuators on both sides of the optical cable. They will protect the devices against "burning".

ULTIMODE devices have MDI/MDIX auto detection feature and automatically find and set the fastest connection speed and mode. "Store and forward" mechanism allows to verify the received data using checksum function.

ULTIMODE media converters are fully compatible with IEEE 802.3 and IEEE 802.3u standards. Their installation is very simple thanks to "Plug and Play" feature. The LED indicators show current operating status. Durable laser diode with Fabry-Perot resonator ensures the mean-time-between-failure (MTBF) at least of 100.000 hours (more than 11 years).

When a ULTIMODE device does not cooperate with a switch coming from another manufacturer (e.g. TP-Link), the Duplex parameter of the optical port in the incompatible device should be set to AUTO.

Distinguishing features:

1 x Ethernet port 10/100 Mbps (RJ-45)
maximum transmission distance - 20 km
transmission via one single-mode fiber (WDM)
LED indicators showing operating status
easy installation (plug and play)
the set contains 2 transceivers and power supplies

NOTICE!! It is not allowed to look directly at the fiber port when the device is plugged. The radiation invisible for the human eye can damage the retina!

Why to choose fiber optics:

possibility of sending signal over long distances (low attenuation of optical fibers - e.g. for the wavelength of 1550 nm the attenuation is about 0.2 dB per kilometer, which means that the signal can be sent at a distance of 200km - without regeneration)
high-volume information transfer via single fiber
resistance to electromagnetic interference
resistance to weather conditions (humidity, electrostatic discharges and others)
no tapping possibility
low weight and small dimensions

ULTIMODE media converters are widely used for the transmission of Ethernet signals over long distances and in areas exposed to harsh weather conditions. Optical fibers provide full electrical insulation and resistance to electromagnetic interference. Media converters are primarily used to connect building LANs (e.g. of scattered buildings of one corporation). Below there is a sample application of ULTIMODE converters.

Example application of ULTIMODE media converter

Add to the Cart items from the diagram

The devices are designed for indoor operation. The ULTIMODE series includes a number of types:

with two multimode fibers - transmission up to 2km - M-023M L10021
with two single-mode fibers - transmission up to 40km - M-403M L11041
with one single-mode (WDM) fiber - transmission up to 20km - M-207G L11525 and transmission up to 40km - M-407M L11541

Specifications

Product type			Media converter
Brand			ULTIMODE
Name			M-207M
Interfejs optyczny
Transmission type			WDM – 1 fiber
Fiber optic type			Single-mode
Optical interface speed		MBps	100
Type of optical interface connector			SC/PC simplex
Transmission range		km	20
wavelength	Tx	nm	1310/1550
	Rx	nm	1550/1310
Transmitter power		dBm	-15...-3
Receiver sensitivity		dBm	> -32
Interfejs Ethernet
Ethernet port	number	pcs.	1
	speed	MBps	10/100
	connector type		RJ45
Others
LEDs			PWR. 100M, Link Act, FDX, SD
Power supply	voltage	DCV	5
	Current capacity	A	2
Operating temperature		°C	0...+50
Dimensions		mm	97 × 73 × 27