English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
€50.21
| Price | Disc. | Quantity | Validity |
|---|---|---|---|
| €50.21 | 0 % | from 1 piece |
Available
Ethernet media converter set ULTIMODE M-407M-2 changes electrical signals (Ethernet data) coming via typical STP/UTP cables into modulated light signal transmitted via single-mode fiber cable and vice versa. The device is equipped with 2-port switch and 2 RJ45 ports.
• Ideal for IP CCTV systems, requires only one single-mode fiber
• Built-in switch - possibility of connecting two IP devices
• WDM system - transmission via a single fiber
• Long transmission distance: 20 km
• Very stable operation
• The set includes two transceivers and power supplies
• Built-in switch - possibility of connecting two IP devices
• WDM system - transmission via a single fiber
• Long transmission distance: 20 km
• Very stable operation
• The set includes two transceivers and power supplies
Details
Ethernet media converter set ULTIMODE M-407M-2 changes electrical signals (Ethernet data) coming via typical STP/UTP cables into modulated light signal transmitted via single-mode fiber cable and vice versa. The device is equipped with 2-port switch and 2 RJ45 ports that can be used e.g. for connecting two IP cameras.
Each unit has one SC connector used to transmit (Tx) or receive (Rx) the signal. It is possible due to the use of wavelength-division multiplexing technology (WDM) - different wavelengths of laser light carry different signals, over one strand of fiber. It significantly lowers installation costs. The L11542 set contains two transceivers and two power supplies (5VDC/2A output).
One of the units transmits optical signal in the III transmission window (1550 nm), whereas the second uses the II window (1310 nm).
ULTIMODE media converters are fully compatible with IEEE 802.3 and IEEE 802.3u standards. Their installation is very simple thanks to "Plug and Play" feature. The LED indicators show current operating status. Durable laser diode with Fabry-Perot resonator ensures the mean-time-between-failure (MTBF) at least of 100000 hours (more than 11 years).
When a ULTIMODE device does not cooperate with a switch coming from another manufacturer (e.g. TP-Link), the Duplex parameter of the optical port in the incompatible device should be set to AUTO.
Distinguishing features:
- A: 2x Ethernet port 10/100 Mbps (RJ-45), 1x SC (Tx-1310nm/Rx-1550nm)
- B:1x Ethernet port 10/100 Mbps (RJ-45), 1x SC (Rx-1310nm/Tx-1550nm)
- maximum transmission distance 40 km
- transmission via one single-mode fiber (WDM)
- LED indicators showing operating status
- easy installation (plug and play)
- the set contains 2 transceivers and 2 power supplies
NOTICE!! It is not allowed to look directly at the fiber port when the device is plugged. The radiation invisible for the human eye can damage the retina!
Why to choose fiber optics:
- possibility of sending signal over long distances (low attenuation of optical fibers - e.g. for the wavelength of 1550 nm the attenuation is about 0.2 dB per kilometer, which means that the signal can be sent at a distance of 200 km - without regeneration)
- high-volume information transfer via single fiber
- resistance to electromagnetic interference
- resistance to weather conditions (humidity, electrostatic discharges and others)
- no tapping possibility
- low weight and small dimensions
ULTIMODE media converters are widely used for the transmission of Ethernet signals over long distances and in areas exposed to harsh weather conditions. Optical fibers provide full electrical insulation and resistance to electromagnetic interference. Media converters are primarily used to connect building LANs (e.g. of scattered buildings of one corporation). Below there is a sample application of ULTIMODE converters.
The devices are designed for indoor operation. The ULTIMODE series includes a number of types:
- with two multimode fibers - transmission up to 2 km - M-023M L10021
- with two single-mode fibers - transmission up to 40 km - M-403M L11041
- with one single-mode (WDM) fiber - transmission up to 20 km - M-207G L11525 and M-207M L11521
- with one single-mode (WDM) fiber - transmission up to 40 km - M-407M L11541
Specifications
| Product type | Media converter | ||
| Brand | ULTIMODE | ||
| Name | M-407M-2 | ||
| Interfejs optyczny | |||
| Transmission type | WDM – 1 fiber | ||
| Fiber optic type | Single-mode | ||
| Optical interface speed | MBps | 100 | |
| Type of optical interface connector | SC/PC simplex | ||
| Transmission range | km | 20 | |
| wavelength | Tx | nm | 1310/1550 |
| Rx | nm | 1550/1310 | |
| Transmitter power | dBm | -15...-3 | |
| Receiver sensitivity | dBm | > -32 | |
| Interfejs Ethernet | |||
| Ethernet port | number | pcs. | 2 |
| speed | MBps | 10/100 | |
| connector type | RJ45 | ||
| Others | |||
| LEDs | PWR. 100M, Link Act, FDX, SD | ||
| Power supply | voltage | DCV | 5 |
| Current capacity | A | 2 | |
| Operating temperature | °C | 0...+50 | |
| Dimensions | mm | 97 × 73 × 27 | |
