The Etrix GR-24K HDMI Grabber captures video and audio from the HDMI output, converting it into a USB signal seen as a camera on the system.
• HDMI signal capture up to 1080p@60fps
• Low latency ideal for configuring DVRs and rack-mounted devices.
• Plug & Play without installing drivers
• Works with OBS, VLC and other recording software
• USB-C connector for smartphone viewing
• Aluminium casing for effective heat dissipation
• Stable operation without jams or frame loss
• Low latency ideal for configuring DVRs and rack-mounted devices.
• Plug & Play without installing drivers
• Works with OBS, VLC and other recording software
• USB-C connector for smartphone viewing
• Aluminium casing for effective heat dissipation
• Stable operation without jams or frame loss
Etrix coaxial cable with molded BNC connectors 0.5 m.
• For connection in CCTV systems
• Length: 0.5 m
• Inner conductor and screening made of copper
• Inner conductor diameter: 0.5 mm
• Length: 0.5 m
• Inner conductor and screening made of copper
• Inner conductor diameter: 0.5 mm
The Etrix 1VP-B is designed for single-source video transmission via twisted-pair cable.
• Transmission of video signal via a twisted-pair cable
• PAL (CVBS): max. transmission distance of 400 m
• HD-TVI, AHD: max. transmission distance of 200 m (720p) or 150 m (1080p)
• HD-CVI: max. transmission distance of 200 m
• PAL (CVBS): max. transmission distance of 400 m
• HD-TVI, AHD: max. transmission distance of 200 m (720p) or 150 m (1080p)
• HD-CVI: max. transmission distance of 200 m
The Etrix 1VP-D transformer has a BNC connector attached with a flexible cable, which ensures free positioning of the BNC end. The UTP cable is connected to a crimp connector.
• Transmission of video signal from 1 camera using UTP cable
• BNC 75 connector placed on cable
• UTP terminal connector
• BNC 75 connector placed on cable
• UTP terminal connector
The Etrix 1VP-C transformer has a BNC connector attached with a flexible cable, which ensures free positioning of the BNC end.
• Transmission of video signal from 1 camera using UTP cable
• BNC 75 connector placed on cable
• UTP screw-connector
• BNC 75 connector placed on cable
• UTP screw-connector
The ETRIX 1VAP transformer has a connector with a flexible cable BNC plug and a 2.1/5.5 socket and plug.
• Transmission of video signal from 1 camera using UTP cable
• BNC 75 connector placed on cable
• UTP RJ-45-connector
• BNC 75 connector placed on cable
• UTP RJ-45-connector
The UTP USB extender is used to connect devices using the universal serial bus.
• Allows remote operation of remote devices
• Maximum range 50 m
• Maximum range 50 m
The P-POE2 Splitter allows to connect two devices with a single UTP cat. 5e twisted pair cable.
• Transmits power and data to two PoE IP cameras
• Uses UTP cat. 5e twisted pair cable
• Designed to work in 10/100 Mbps networks
• Uses UTP cat. 5e twisted pair cable
• Designed to work in 10/100 Mbps networks
A device that enables the use of standard DC 12 V power in a PoE environment.
• Input: IEEE 802.3af / 802.3at PoE standards, DC input voltage 44-57 V.
• Output: DC 12 V output voltage, maximum current 2 A, maximum power 24 W, DC 5.5 × 2.1 mm connector
• 10/100 Mbps data transmission speed
• Galvanic separation of input and output via high-frequency isolation transformer
• Output: DC 12 V output voltage, maximum current 2 A, maximum power 24 W, DC 5.5 × 2.1 mm connector
• 10/100 Mbps data transmission speed
• Galvanic separation of input and output via high-frequency isolation transformer
Compact PoE extender designed to extend the range of Ethernet networks with PoE power supply. Hermetic housing.
• Compatible with IEEE 802.3af / 802.3at
• Maximum PoE output power 25.5 Watts.
• Transmission speed: 10/100 Mbps
• Cascadable for up to 3 devices
• LED indication: PWR, IN, OUT
• Hermetic, plastic casing for outdoor applications
• Maximum PoE output power 25.5 Watts.
• Transmission speed: 10/100 Mbps
• Cascadable for up to 3 devices
• LED indication: PWR, IN, OUT
• Hermetic, plastic casing for outdoor applications



