€0.40
Price | Disc. | Quantity | Validity |
---|---|---|---|
€0.40 | 0 % | from 1 piece |
Available
The monolithic, nickel-plated brass F-connector is designed for RG-59 type cables.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the RG-59 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the RG-59 cable family
Details
The monolithic E80322 F-connector is made of brass plated with nickel and is specially prepared for RG-59 / CAMSET cables. The material used ensures resistance to corrosion. High precision ensures superior quality and professional look. The compression method of installation is very simple and guarantees good and stable connection for a long time. Precise thread eliminates problems with screwing the connectors on sockets, which can happen with other plugs. Double compression rings (on the cable) and the O-ring seal (connection side) fully protect the cable and the connection (the equipment) against water penetration.
The MASTER F 59 E80322 compression connector is intended for the following cables:
The connectors should be installed with the use of the all-in-one compression tool E80075.
The E80322 connector can be used with any RG-59 cables with diameters of inner conductors from 0.55 to 0.80 mm.
Key features:
- wide operating bandwidth
- watertight connector to cable connection
- very low attenuation over the entire operating band
- excellent adaptation to the transmission line in the whole operating band
- very simple and quick assembly - way of crimping: longitudinal compression
- properly crimped connector is very difficult to tear off the cable
- dimensionally adjusted to RG-59 cable family
- the construction of this connector is protected by numerous patents
- for crimping it one should use compression connector crimper E80076
- comparing this connector with others, it should be noted that the speed, certainty of installation and stability of the connection made are balanced by the price of this connector
Specifications
Product type | Plug | ||
connector type | F | ||
Brand | MASTER | ||
Installation | Compression | ||
Cable family | RG-59/CAMSET | ||
Technical specifications | |||
Impedance | Ohm | 75 | |
Frequency range | MHz | 5...2400 | |
Shielding class | A | ||
Material | Basic | Brass 360 | |
Material | Finishing | Nickel | |
Gasket | Ethylene propylene rubber | ||
Dimensions | Outer diameter | mm | 10.8 |
Dimensions | Inner diameter | mm | 7.63 |
Inner sleeve diameter | mm | 3.9 |