English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
This product is no longer available
Replacements
Support
Details
View of the connector
Opposite side view
Sectional views of the new and compressed connector (on RG-6 cable)
The sectional views perfectly show how the E80330 connector is compressed on the cable. Two compression rings ensure high resistance to break and waterproof termination of the cable. Freely rotating nut with precise thread eliminates the known problems of installers with connecting RF devices equipped with F sockets.
The professional compression connector TRS-6 NT E80330 is dedicated for the following cables:
- E1230_100 RG-6 Cu
- E1231_100 RG-6 Cu PE
- E1232_100 RG-6 Fe/Cu
American design and excellent precision make the job of installer much easier. The recommended compression tool - PCT-AIO-CT E80075.
Distinguishing features
- wide operating band - up to 3 GHz,
- waterproof termination of the cable,
- resistance to corrosion - made of non-ferrous metals and highest-quality dielectric,
- very low loss in the whole operating band,
- perfect matching to the transmission line within the whole operating band,
- simple and quick assembly: longitudinal compression,
- properly compressed connection is highly resistant to break, due to dual compression rings,
- monolithic construction,
- the termination of the cable (stripping) should be performed with the E80074 tool (1/4" and 1/4"),
- the connector can be screwed on the socket with 7/16" wrench,
- to be compressed with PCT-AIO-CT E80075 compressing tool,
- quick and easy assembly, as well as stability of operation of the equipment are really worth the price.
Specifications
| Name | F Compression Connector PCT PCT-TRS-6-NT (for RG-6) |
| Code | E80330 |
| Material | |
| Body material | C 360 brass |
| Body finish | Nickel tin |
| O-ring | Ethylene-propylene rubber |
| Physical dimensions | |
| Body outer diameter | 10.7 mm |
| Body inner diameter | 8.2 mm |
| Mandrel inner diameter | 4.7 mm |
| Electrical parameters | |
| Return loss | -28 dB up to 3 GHz |
| Insertion loss | -0.2 dB up to 3 GHz |
| RFI shielding | -80 dB |
The connector fulfills the following requirements:
| Parameter | Specification | Requirement |
| Cable retention | SCTE-IPS-TP-401 | pull force > 178 N |
| Chemical resistance | BLCR-GR-1503-CORE 4.7 | no cracking or swelling |
| Corrosion resistance | BLCR-GR-1503-CORE 3.2.1 | 1000 hours in salt spray |
| Dielectric strength | BLCR-GR-1503-CORE 3.5.2 | 1 kV AC for one minute |
| Equipment interface | BLCR-GR-1503-CORE 3.2.4 | 10 matings with torque 4.47 Nm without damage |
| Insertion loss | BLCR-GR-1503-CORE 3.5.3 | < 0.05 dB up to 350 MHz < 0.1 dB up to 700 MHz < 0.2 dB up to 1 GHz |
| Installation force | SCTE IPS-TP-004 | < 89 N |
| Loosening torque | BLCR-GR-1503-CORE 4.2 | > 3.35 Nm |
| Moisture migration | SCTE IPS-TP-013 | no dye penetration after 5 days of temperature cycling |
| Ozone degradation | BLCR-GR-1503-CORE 4.1 | 70 hours exposure |
| Return loss | SCTE IPS-TP-110 | > 30 dB up to 1GHz |
| Salt fog | BLCR-ASTM B 117 | > 30 dB up to 1GHz |
| Shielding effectiveness | SCTE IPS-TP-403 | > 100 dB up to 300 MHz, > 90 dB up to 1GHz |
| Temperature cycling with humidity | BLCR GR-1503 4.1 | pull force > 178 N |
| UV degradation | BLCR-GR-1503-CORE 4.8 | no change after 7 days |
| Vibration | BLCR-GR-1503-CORE 4.6 | loosening torque after vibration > 3.57 Nm |
Specifications
| Nazwa | Złącze F TRS-6 NT PCT kompresyjne do kabli RG-6 |
| Kod | E80330 |
| Materiał | |
| Podstawowy materiał złącza | Mosiądz 360 |
| Wykończenie złącza | Nikiel |
| Uszczelka | Guma etylenopropylenowa |
| Wymiary fizyczne | |
| Średnica zewnętrzna | 10,7 mm |
| Średnica wewnętrzna | 8,2 mm |
| Średnia wewnętrznej tuleji | 4,7 mm |
| Parametry elektryczne | |
| Tłumienie odbić | -28 dB do 3 GHz |
| Tłumienie wtrąceniowe | -0,2 dB do 3 GHz |
| Ekranowanie | -80 dB |
