This website uses cookies

We use cookies , which makes our store reliably and adapt to you. Cookies allow you to match content and promotion to your interests.

If you do not agree, it will not affect the display of ads, but they will not match you.

Cookies required for our store to work
Cookies we use to identify Your needs
Cookies we use to personalize ads
Cookies we use to improve the store
Settings Save Reject all Accept all

Fiber Optic Mechanical Splice: ULTIMODE FAST-MS1 [5 pcs.]

  2. Fiber Optics
  3. Fiber Connecting
  4. Mechanical Splices
Code: L5550
€7.51
Price Disc. Quantity Validity
€7.51 0 % from 1 piece
Available
ULTIMODE FAST MS-1 mechanical splices enable permanent fibre connections to be made without the use of fibre splicers.
• Ideal for CCTV installations based on optical fibres
• For optical fibres with diameters of 250 μm and 900 μm
• For single mode and multimode fibres.
• Average attenuation of splices: approx. 0.15 dB
• In pack of 5 pieces
Estore: Library: , , , , , .

Warranty

3-year warranty.

Support

Any questions or comments?

  • Write to us!

Details

Mechanical splices ULTIMODE FAST-MS1 are used for permanent connections of optical fibers without the need of employing fusion splicers. Low loss at the level of 0.15 dB is obtained thanks to advanced positioning of the fiber end faces by V-shaped grooves. The optical gel that is also used in the mechanical splice reduces the effects of imprecise cuts and a possible gap between the end faces.
The versatile design is used for splicing optical fibers with buffer coating diameters of 250 um (micrometers or microns) and 900 um, providing high performance connections of multimode and single-mode fibers.
Mechanical splices are suitable for connecting optical lines in similar cases like fusion splices, e.g. to connect pigtails in distribution boxes, repair damaged optical cables etc.
ULTIMODE FAST-MS1 is now probably the fastest installed mechanical splice on the market. The whole procedure takes about 60 seconds.
Key features:
  • mechanical splice ULTIMODE FAST-MS1 for optical fibers with buffer coating diameters of 250 μm and 900 μm
  • suitable for multimode and single-mode optical fibers
  • the time needed to perform the operation is about 60 seconds
  • low loss: approx. 0.15 dB
  • the set consists of 5 pieces
The necessary tools needed for connecting optical fibers:
  • Fiber Optic Stripper L5905 - used to remove the buffer with a diameter of 250 µm (from the fiber cladding with a diameter of 125 µm)
  • IPA cleaner L5915 and dust-free Kim-Wipes L5913 - accessories necessary for cleaning fibers
  • Fiber disposal container L5918
  • Fiber cleaver F1-6000 L5801

Specifications

Product type Mechanical weld
Name FAST-MS1
Fiber type Single-mode, Multimode
Fiber diameter μm 250, 900
Loss minimum dB 0.25
typical 0.5
Dimensions mm 40 × 5 × 5
Weight kg 0.01

Videos

Fiber splicing

  • 2011-09-16

Short video with a fiber splicing demonstration.