Fixed Dome IP Camera: Hikvision DS-2CD2E20F (2MP, 4mm, 0.01 lx, PoE)

Code: K1747
This product is no longer available
Estore: Library:

Support

Details

Fixed Dome IP Camera: Hikvision DS-2CD2E20F (2MP, 4mm, 0.01 lx, PoE)
View of the camera

Fixed Dome IP Camera: Hikvision DS-2CD2E20F (2MP, 4mm, 0.01 lx, PoE)
Fixed Dome IP Camera: Hikvision DS-2CD2E20F (2MP, 4mm, 0.01 lx, PoE)
View of the micro SD slot and connectors
Fixed Dome IP Camera: Hikvision DS-2CD2E20F (2MP, 4mm, 0.01 lx, PoE)
The included accessories
Fixed Dome IP Camera: Hikvision DS-2CD2E20F (2MP, 4mm, 0.01 lx, PoE)
View of the packaging
Key features
  • Resolution: 2 MP (1920x1080)
  • Image processing functions: 3D-DNR, WDR, BLC
  • Intelligent image analysis (virtual line crossing, intrusion detection)
  • Regions of interests (ROI)
  • H.264/MJPEG compression
  • Support for microSD/microSDHC/microSDXC cards up to 128 GB
  • Mechanically switching IR filter
  • Power: 12 VDC or PoE (802.3af)
The DS-2CD2E20F K1747 camera offers excellent parameters for affordable price. The dome camera has been equipped with high quality 2 MP (1920x1080) CMOS sensor providing perfect video even in low-light conditions. The camera has intelligent analysis functions such as line crossing and intruder detection in a specific area. The user can setup regions of interest (ROI) - parts of the image with increased video transmission parameters.
Thanks to H.264 compression, the data stream is minimized. The user can configure two independent streams (primary and secondary), as well as choose H.264 or MJPEG compression and limit the bandwidth within 32 kb/s to 8 Mb/s range.
The camera has been designed for indoor applications. Thanks to special construction, the camera can be easily mounted in suspended ceilings. The camera should can be powered with a 12 VDC power source or via PoE (802.3af).
Ezviz (EasyVision) is a free service which can be activated in Hikvision NVRs and IP cameras. This free service allows less advanced users to easily access to the video from the cameras via the Internet, without forwarding router ports. To enable remote access, the user should only connect the device to the network (which requires a valid IP address and appropriate gateway settings). The next step is the creation of user account at the www.ezviz7.com website. The account can accommodate devices in a local area network (with activated Ezviz service). The devices will be available from anywhere via the Internet.
Specifications
Name HIKVISION DS-2CD2E20F

Code

K1747
Video system
IP
Housing type
Fixed dome
Compression
H.264/MJPEG
Resolution 1920 x 1080
Dual-stream Yes
Frame rate

25 fps at 1920x1080 or lower res.

Image sensor
1/2.8" Progressive Scan CMOS
Sensitivity 0.01 lx @F1.2 with AGC
0 lx in IR mode
Lens 4 mm
Horizontal viewing angle
85o
Mechanically switching IR filter
Yes
IR illuminator
No
Brightness control
Yes
Sharpness control
Yes
Video processing
3D-DNR, WDR(120dB), BLC
Gain Automatic/Preset
Alarm events

Motion detection, dynamic analysis, tampering

Intelligent image analysis
Yes
Line crossing
1 line
Intruder detection
1 region
ROI1 region
SD interface
microSD/microSDHC/microSDXC
Recording Remote FTP server, NAS server
Network interface
RJ-45 10/100Base-T
Protocols TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP,
PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour
Supported standards
Onvif, PSIA,CGI, ISAPI
Power 12 VDC ± 10%
PoE IEEE 802.3af
Power consumption
Max 4.5 W
Startup temperature range
-10°C ... 40°C
Operating temperature range
-30°C ...  60°C
Dimensions Φ93 × 121 mm
Weight 0.2 kg