Flat Panel Wall Mount: Signal LP42-44ST (32''... 55'', tilt)

Code: E93125
€10.68 €11.13
Previous lowest price: €11.13
Price Disc. Quantity Validity
€11.13 0 % -
€10.68 4 % from 1 piece 2024-12-05
Available
Signal LP42-44ST E93125 mount has been designed to place a modern LCD/LED/OLED monitor / television on a wall. Its load capacity is 50 kg. The mount allows easy adjustment of tilt (without additional tools) in the range from -10 to 0 degrees.
• Screen size range: 32''... 55''
• Tilt adjustment: -10° ... 0°
• Load capacity: 50 kg
• Distance from wall: 46 mm

Warranty

3-year warranty.

Support

Details

Signal LP42-44ST E93125 mount has been designed to place a modern LCD/LED/OLED monitor / television on a wall. Its load capacity is 50 kg. The mount allows easy adjustment of tilt (without additional tools) in the range from -10 to 0 degrees. Due to a special design, the rear of a TV/monitor is only 40 mm from the wall. The built-in bubble level allows for precise and fast installation.




Distinguishing features:
  • Screen size range: 32''... 55''
  • Tilt adjustment: -10o ... 0o
  • Load capacity: 50 kg
  • Distance from wall: 40 mm
  • Mounting interface: VESA max. 200x200, 400x200, 300x300, 400x400
The wall has to carry the load of the panel and the mount, including a wide margin of safety.
The mount cannot be installed on walls that do not provide firm hold (steel stud, old cinder block, plaster panel etc). If you are uncertain about the nature of the wall, consult an installation company.
The set contains all components needed for typical installation. In some specific conditions there may be required auxiliary elements or tools that should be supplied by professionals installing this type of hardware.

The basic tools required (not included): 3 mm drill bit for mounting on wood / metal constructions, 10 mm masonry bit for brick / concrete block installations, electric drill, Phillips screwdriver (min. length: 200 mm), marker.
Safety warning.
The set includes assembly instructions. If you do not understand those directions, or have any doubts about the safety of the installation, please call a qualified installer.
Before mounting check carefully to make sure there are no missing or defective parts. If you have any doubts do not begin installation.
Some operations should be performed by two skilled people!
Improper installation may cause damage or serious injury.
Do not use this product for any other purpose than specified.
Neither the producer nor distributor shall be liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use.
Collective package contains 5 mounts.
Available versions of the mount
Name PLB-42L PLB-43
Code E93125 E93127
Screen size range 32'' - 55'' 37'' - 70''

 

Specifications

Product type TV bracket
Manufacturer SIGNAL
type Wall
Name LP42-44ST
Adjustment Yes
TV/monitor size inches 32 – 55
VESA standard 200 × 200, 300 × 300, 400 × 200, 400 × 400
Distance from wall mm 40
Load capacity kg 75
Vertical tilt degree -10...0
Own weight kg 3.12