Flat Panel Wall Mount: Signal LPA13-442 (32"-55", tilt & swivel)

Code: E93162
This product is no longer available
Estore: Library:

Support

Details

Flat Panel Wall Mount: Signal LPA16-444A  (32
View of the mount
Sketch of the mount
Flat Panel Wall Mount: Signal LPA16-444A  (32
View of the packaging






Distinguishing features:
  • Screen size range: 32'' - 55''
  • Tilt adjustment: -15o ... +15o
  • Horizontal rotation range: -90o ... +90o
  • Leveling: -5o ... +5o
  • Load capacity: 30 kg
  • Distance from wall: 125 - 615 mm
  • Mounting interface: VESA (max. 400x400)
Signal LPA13-442 E93162 mount has been designed to place a modern LCD or plasma monitor / television on a wall. Its load capacity is 30 kg. The mount allows easy adjustment of tilt (without additional tools) in the range from -15o to 15o. It is also possible to rotate the panel horizontally (+/-90 degrees) and adjust the distance from the wall (125 mm to 615 mm). Additionally, the panel can be leveled (skew adjustment within -5o to 5o). The built-in bubble level allows for precise and fast installation.
The mount has been specially prepared for cases where the position of a television or monitor should be easily adjusted (tilt and swivel). Signal LPA13-442 allows the user to adjust the screen in 3 planes. After changing the position of the panel, it may be necessary to correct the level of the screen - all adjustments can be performed manually in seconds, without any additional tools. A slight downward inclination of the arm is typical and does not affect the safety and functionality of the bracket.
For installations where the position of the screen will be changed frequently, the recommended type of hardware is that with two arms: E93167, E93160, E93169.
The wall has to carry the load of the panel and the mount, including a wide margin of safety.
The mount cannot be installed on walls that do not provide firm hold (steel stud, old cinder block, plaster panel etc). If you are uncertain about the nature of the wall, consult an installation company.
The set contains all components needed for typical installation. In some specific conditions there may be required auxiliary elements or tools that should be supplied by professionals installing this type of hardware.

The basic tools required (not included): 3 mm drill bit for mounting on wood / metal constructions, 10 mm masonry bit for brick / concrete block installations, electric drill, Phillips screwdriver (min. length: 200 mm), marker.
Safety warning.
The set includes assembly instructions. If you do not understand those directions, or have any doubts about the safety of the installation, please call a qualified installer.
Before mounting check carefully to make sure there are no missing or defective parts. If you have any doubts do not begin installation.
Some operations should be performed by two skilled people!
Improper installation may cause damage or serious injury.
Do not use this product for any other purpose than specified.
Neither the producer nor distributor shall be liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use.
Specifications
Name Signal LPA13-442
Code E93162
Screen size range 32" - 55"
Distance from wall 125 - 615 mm
FDMI / MIS VESA (max. 400x400)
Load capacity 30 kg
Tilt adjustment -15o ... +15o
Horizontal rotation -90o ... +90o
Skew adjustment
-5o ... +5o
Dimensions 500 mm x 440 mm x 615 mm
Weight 9.5 kg
Collective package contains 2 mounts.
Similar mounts:
Name LPA13-484 LPA19-442 LPA19-464X
View
Code E93167 E93168 E93169
Screen size range
37'' - 70'' 32'' - 55'' 37'' - 70''

Specifications

Nazwa Signal LPA13-442
Kod E93162
Rozmiar TV w calach 32" - 55"
Odległość od ściany 125 - 615 mm
Standard mocowania Max. VESA: 400x400
Nośność 30 kg
Pochylenie w pionie -15o ... +15o
Obrót w poziomie -90o ... +90o
Rotacja w płaszczyźnie ekranu -5o ... +5o
Wymiary 500 mm x 440 mm x 615 mm
Masa własna 9,5 kg