English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
Support
Details
View of the mount
Sketch of the mount
View of the packaging
 |  |  | ||
 |  |  |  |  | ||||
Distinguishing features:
- Screen size range: 37'' ... 70''
- Tilt adjustment: -15o ... +15o
- Horizontal rotation range: -60o ... +60o
- Leveling: -5o ... +5o
- Load capacity: 60 kg
- Adjustable distance between a TV and wall: 116...524 mm
- Mounting interface: VESA (max. 800x400)
Signal LPA13-442 E93167 mount has been designed to place a modern LCD/LED/OLED monitor / television on a wall. Its load capacity is as much as 60 kg. The mount allows easy adjustment of tilt (without additional tools) in the range from -15o to 15o. It is also possible to rotate the panel horizontally (+/-60 degrees) and adjust the distance from the wall (116 mm to 524 mm). Additionally, the panel can be leveled (skew adjustment within -5o to 5o). The built-in bubble level allows for precise and fast installation.
The mount has been specially prepared for cases where the position of a television or monitor should be easily adjusted (tilt and swivel). Signal LPA13-484 allows the user to adjust the screen in 3 planes. After changing the position of the panel, it may be necessary to correct the level of the screen - all adjustments can be performed manually in seconds, without any additional tools. A slight downward inclination of the arm is typical and does not affect the safety and functionality of the bracket.
For installations where the position of the screen will be changed frequently, the recommended type of hardware is that with two arms: E93167, E93160, E93169.
For installations where the position of the screen will be changed frequently, the recommended type of hardware is that with two arms: E93167, E93160, E93169.
The wall has to carry the load of the panel and the mount, including a wide margin of safety.
The mount cannot be installed on walls that do not provide firm hold (steel stud, old cinder block, plaster panel etc). If you are uncertain about the nature of the wall, consult an installation company.
The set contains all components needed for typical installation. In some specific conditions there may be required auxiliary elements or tools that should be supplied by professionals installing this type of hardware.
Safety warning.
The set includes assembly instructions. If you do not understand those directions, or have any doubts about the safety of the installation, please call a qualified installer.
Before mounting check carefully to make sure there are no missing or defective parts. If you have any doubts do not begin installation.
Some operations should be performed by two skilled people!
Improper installation may cause damage or serious injury.
Do not use this product for any other purpose than specified.
Neither the producer nor distributor shall be liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use.
Neither the producer nor distributor shall be liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use.
Specifications
| Name | Signal LPA13-484 |
| Code | E93167 |
| Screen size range | 37" ... 70" |
| Distance from wall | 116 mm ... 524 mm |
| FDMI / MIS | VESA up to 800x400 |
| Load capacity | 60 kg |
| Tilt adjustment | -15o ... +15o |
| Horizontal rotation | -60o ... +60o |
| Skew adjustment | -5o ... +5o |
| Weight | 10 kg |
| Dimensions (packaging) | 90x23.5x11.5 cm |
Collective package contains 2 mounts.
Available versions of the mount
Specifications
| Product type | TV bracket | ||
| Manufacturer | SIGNAL | ||
| type | Wall | ||
| Name | LPA13-484 | ||
| TV/monitor size | inches | 37 – 70 | |
| VESA standard | 800 × 400 | ||
| Distance from wall | mm | 116 – 524 | |
| Load capacity | kg | 60 | |
| Horizontal rotation | degree | -60...+60 | |
| Vertical tilt | degree | -15...+15 | |
| Screen plane rotation | degree | -5...+5 | |
| Dimensions | mm | 90 × 24 × 12 | |
| Own weight | kg | 10 | |
