€126.17
| Price | Disc. | Quantity | Validity |
|---|---|---|---|
| €126.17 | 0 % | from 1 piece |
Available
House amplifier used in SMATV and cable systems with return channel.
• House amplifier
• Dedicated to cable systems
• Frequency range: 5...65 MHz/87...1218 MHz
• Push-pull output stage, made of gallium arsenide GaAs
• Waveform correction filter at input of the transmission and return channel
• Die-cast housing
• Gain of 40 dB (transmission channel) and -5/27 dB (return channel)
• Dedicated to cable systems
• Frequency range: 5...65 MHz/87...1218 MHz
• Push-pull output stage, made of gallium arsenide GaAs
• Waveform correction filter at input of the transmission and return channel
• Die-cast housing
• Gain of 40 dB (transmission channel) and -5/27 dB (return channel)
Details
The HA-216R65 house amplifier is a professional device used in SMATV and cable systems with return channel. The chip of the HA-216R65 amplifier at the penultimate gain stage is made of SiGe silicon-germanium nanostructures (silicon-germanium chip). Such a solution allows significant reduction of non-linear distortion, especially when it comes to second-order distortion. The final stage in the reciprocal circuit is made of gallium arsenide (GaAs).
The use of dual-circuit technology, consisting of an attenuator and a waveform correction filter, makes it possible to ensure the best possible signal performance (high signal-to-noise ratio).
The enclosure provides high shielding effectiveness preventing the penetration of interfering signals into the device. High output signal level and built-in pre-correction of attenuation characteristics of coaxial cables allows for making large systems.
Key features:
- push-pull output stage, made of gallium arsenide GaAs
- frequency range: 5...65 MHz/87...1218 MHz
- waveform correction at the input of the transmission channel
- waveform correction between stages one and two of the transmission channel
- attenuator at the input of the transmission channel
- possibility to switch on or off the amplifier at the return channel
- attenuator at the input of the return channel
- waveform correction at the output of the return channel
- attenuator at the output of the return channel
- test connector -20dB
Specifications
| Product type | FM/TV House Amplifier | ||
| Model | HA-216R65 | ||
| Brand | TERRA | ||
| type | RF TV/CATV | ||
| Applications | Indoor | ||
| Operating band | FM/VHF/UHF | ||
| Inputs/Outputs | input count | 1 | |
| Inputs/Outputs | number of outputs | 1 | |
| DC 0/12 V switch | No | ||
| Gain control | Yes | ||
| Gain parameters | |||
| Input 1 | Frequency | MHz | 5...65/87...1218 |
| Input 1 | Gain | dB | -5/27 (return channel), 40 (transmission channel) |
| Gain control | dB | 0...18 | |
| Preamplifier power supply | V/A | None | |
| Pre-correction of cable attenuation characteristics | Yes | ||
| Pre-correction of cable attenuation characteristics | VHF | dB | 0...18 |
| UHF | dB | 0...18 | |
| Return channel | dB | -6/-3/0 | |
| Device specifications | |||
| Max. output level | IMD2=60 dB (EN50083-3) | dBµV | 109 |
| Inner noise | VHF | dB | 7 |
| Inner noise | UHF | dB | 6 |
| Return channel | dB | 7 | |
| attenuator | transmission channel | dB | -10/-5/0 |
| attenuator | Return channel | dB | -10/0 |
| Die-cast enclosure | Yes | ||
| Signal connector type | F | ||
| Return channel | Yes | ||
| RF test output | Yes | ||
| RF test output | Yes | ||
| Power supply | V | AC 230/50-60 Hz | |
| Pobór mocy | W | 7 | |
| Operating temperature | °C | -20...+50 | |
| Dimensions | mm | 185 × 91 × 47 | |
| Weight | kg | 0.72 | |
