My Cart is empty

GSM/3G Repeaters

GSM Repeaters

GSM Amplifier/Repeater SIGNAL GSM-505 (without PSU)
Code: A6775
Price w/o taxPriceDisc.Validity  
434.63 EUR434.63 EUR0 %
2-year warranty
GSM Amplifier/Repeater SIGNAL GSM-505 (without PSU)
Top view

GSM Amplifier/Repeater SIGNAL GSM-505 (without PSU)
Rear view

GSM Amplifier/Repeater SIGNAL GSM-505 (without PSU)
Bottom view
Signal GSM-505 A6775 repeater amplifies GSM signals inside buildings. The device is ideal for locations where the range of a cellular network is sufficient to use mobile phones outside buildings, but is inadequate for indoor operation. Such locations include some remote places (long distances to base stations), but more often rooms in old buildings with thick walls or in basements and cellars (e.g. pubs, coffee shops). A strong barrier can also be modern windows with panes covered with metallic layers.
The SIGNAL GSM-505 repeater amplifies the whole GSM+EGSM frequency range and complies with RED 2014/53/EU directive and ETSI 303 609 standard that is the basis for CE declaration.
The user has to buy a power supply separately. The recommended PSU is N93319.
Distinguishing features:
  • Support for GSM phones - GSM+EGSM: 880-960 MHz;
  • Compliance with ETSI 303 609 required for this kind of devices;
  • AGC (ALC) - automatic gain/level control;
  • MGC - manual gain control (attenuator);
  • Gain suitable for the coverage area;
  • Indoor coverage area up to 500 m2;
  • Easy installation (Plug and Play);
  • The packaging does not contain an outdoor antenna (it should be selected depending on signal level - usually A741030, sometimes A7018 or A7028);
  • 24-month warranty.
Contents of the set:
  • Main unit,
  • Special bracket for mounting the device,
  • User manual (in English).
This product can solve the problem of low signal in hotels, boardinghouses, and various buildings, allowing to use cellular phones for calls and Internet access.
Important features:
Extended operating band. The GSM repeater amplifies signals of the "old" GSM band and new EGSM band that has been introduced to increase the number of operators. The total frequency range of the device covers 880-915 MHz and 925-960 MHz bands.
ALC function. Automatic level control automatically adjusts gain of the device within range of 20 dB. It will not allow to overdrive the internal amplifier in the case of input signal fluctuations.
Adjustable input attenuation The built-in attenuator allows to adjust the optimum level of the input signal (attenuation 0-31 dB, step 1 dB).
Additional information on the new repeaters is available here.
Installation of the Signal GSM-505 A6775 repeater:
  • find a place outside building with a good GSM signal,
  • mount the outdoor antenna (usually A741030) so that it is directed towards GSM base station,
  • choose a location for installing the repeater somewhere inside the building to place the indoor antenna in the central part of the building/hall/room to be covered,
  • check if the distance between the outdoor and indoor antennas is at least 10 m,
  • install the Signal GSM-505 repeater in the suitable place in the hall/room (away from heaters etc., ensuring natural ventilation),
  • be sure that the antennas are connected to the dedicated, marked sockets,
  • connect the AC power plug to a wall outlet (230 VAC).
Signal GSM-505 A6775 repeater connects with both antennas via coaxial cables. It usually provides enough flexibility to place the device near an AC power socket.
Declaration of Conformity
Below there is an example of using the repeater for better cellular coverage in a home
GSM/DCS/UMTS Antenna: TRANS-DATA KYZ8.2/9.5GSM Amplifier/Repeater SIGNAL GSM-505 (without PSU)Two-way TRANS-DATA GSM SplitterAC/DC Adapter: 9 VDC, 3A (2.1/5.5 mm)GSM/DCS/UMTS Antenna: TRANS-DATA DW3-AGSM/DCS/UMTS Antenna: TRANS-DATA DW3-A
An application in a detached house

NameRepeater SIGNAL GSM-505
Operating band [MHz]880-915
Output power [dBm]15
Gain [dB]65/65
Max group delay [ μs]0.5
Input attenuation (adj. manually) [dB]0-31 (step 1)
AGC range [dB]up to 20
Indoor coverage area [m2]up to 500
Impedance [Ω]50
100-240 VAC 2 A / 9 VDC 3 A
ETSI 303 609), RoHS
Dimensions [mm]218x155x65
Antenna connectors (for outdoor/indoor antenna)N-f/N-f


Repeaters made to order
We also offer selective GSM repeaters for GSM operators.

To evaluate the price of such a repeater, we need the necessary technical specifications:
  • frequency range: 400 MHz to 2700 MHz. A single repeater can amplify multiple channels, also with spacing.
  • gain:10 dB to 85 dB
  • output power: 1...27 dBm
  • connectors: SMA or N
Please send your inquiries to our customer service.
Price w/o taxPriceDisc.Validity  
434.63 EUR434.63 EUR0 %
GSM Amplifier/Repeater SIGNAL GSM-505 (without PSU)
Code: A6775