HD-TVI Camera V-CAM 560 (ceiling, 1080p, 2.8-12mm, 0.01 lx, IR up to 30m; CVBS, AHD, HD-CVI)

Code: M7429
This product is no longer available
Estore: Library:



HD-TVI Camera V-CAM 560 (ceiling, 1080p, 2.8-12mm, 0.01 lx, IR up to 30m; CVBS, AHD, HD-CVI)
General view of the camera

HD-TVI Camera V-CAM 560 (ceiling, 1080p, 2.8-12mm, 0.01 lx, IR up to 30m; CVBS, AHD, HD-CVI)
The included accessories
HD-TVI Camera V-CAM 560 (ceiling, 1080p, 2.8-12mm, 0.01 lx, IR up to 30m; CVBS, AHD, HD-CVI)
View of the connectors (power (2.1/5.5) and video (BNC)) and joystick on the cable
The video system is selected by long pressing (5 s) the thumb stick to the right (HD-TVI), left (CVBS), up (AHD), or down (HD-CVI).
Distinguishing features:
  • Resolution: 1080p (2 MP),
  • Output video signal in HD-TVI, CVBS, AHD, or HD-CVI standard,
  • Sensitivity: 0.01 lx,
  • Lens: 2.8-12 mm,
  • Mechanically switching IR filter (ICR),
  • Access to OSD menu via the video cable,
  • WDR,
  • 2D DNR noise reduction,
  • IR illuminator with range up to 30 m,
  • Vandal-proof housing.
V-CAM 560 M7429 camera has been designed for use in CCTV systems based on HD-TVI DVRs. The camera provides 1080p video. With high sensitivity (0.01 lx) and built-in IR illuminator with range up to 30 m, the camera ensures high quality image in low light or even no-light conditions. The employed Sony Exmor NIR sensor has been developed specially for demanding video surveillance applications. Newly developed process and pixel technologies pushed up the sensitivity in the near infrared light region, up to 2 times compared with the existing products, with increased resolution and lower crosstalk.
High Definition Transport Video Interface (HD-TVI) is a new technology that allows users to send uncompressed, high-resolution video (up to 1080p) over coaxial or twisted-pair cables (using dedicated baluns). The transmitted video signal is in analog form, with bandwidth much greater than in the case of CVBS (SD). As the signal is not compressed, the picture is more natural during live viewing. There is no delay and the configuration of such a system is easier compared to IP CCTV solutions.
The camera has the ability to control the OSD menu using the video signal cable. The control is possible via a compatible DVR, after selecting PTZ control in its menu and switching on the menu of the camera, with access to all configuration options.
Mechanical IR-cut filter ensures perfect color rendition in daylight and full sensitivity with IR lighting.
Main advantages of HD-TVI systems:
  • no delay
  • natural live image due to lack of video compression
  • video transmission via coaxial cables
  • high resolution – 720p or 1080p
  • tribrid DVRs – support for HD-TVI, CVBS and IP cameras,
  • high resistance to electromagnetic interference through the use of QAM synchronous amplitude modulation and separation of luminance and chrominance signals
  • much easier configuration compared to systems based on IP protocol
  • two-way communication – access to OSD menus of cameras and PTZ control via the video cable, directly from the HD-TVI DVR
  • maximum video transmission range longer than in the case of CVBS signals
HD-TVI systems allow for sending additional signals over the video cable
HD-TVI system can transmit a range of signals via a single coaxial cable:
  • HD video from the camera
  • audio from the camera
  • PTZ commands to the camera
  • OSD menu control commands to the camera
Name V-CAM 560
Code M7429
Video format
Effective pixels
Sensitivity at F1.2, 40 IRE [lx] 0.01
Electronic shutter
OSD menu
Yes (via DVR)
Day/Night function
Yes, ICR
Digital noise reduction
Yes, 2D DNR
Privacy zones
Mirror image
Motion detection
IR illuminator
range up to 30 m
Lens 2.8 -12 mm
Viewing angle
87°... 16°
Housing type
vandal proof
Housing dimensions

Ø131 x 93 mm

Housing material
aluminum alloy
Operating temperature range
Working environment
inside buildings
Connectors video (BNC)
power (2.1/5.5)
Power 12 VDC; 0.7 A
Power consumption
8.4 W
Weight 0.8 kg
Remarks -