We introduce a revolutionary line of HIKVISION products: HD-TVI TURBO HD DVRs and cameras. The unprecedented combination of megapixel resolutions and the ease of installation of analog systems.
Support
Details
Hikvision DS-7104HQHI-K1(C)(S) is a 4-channel CCTV DVR capable of recording surveillance video provided in HD-TVI, AHD, CVBS and IP standards with the resolution is 1080p@15fps. One channel, however, can support 3MP@15fps. For VGA / WD1 / 4CIF / CIF resolutions, the maximum frame rate is 25 fps.
The upgraded DS-7104HQHI-K1(B) version also supports a 4 MP Lite recording mode (1280x1440@15fps) and one IP camera up to 6 MP.
The upgraded DS-7104HQHI-K1(B) version also supports a 4 MP Lite recording mode (1280x1440@15fps) and one IP camera up to 6 MP.
H.265 video compression
The DVR can record one or two video streams (primary and/or secondary) from each channel. The video can be compressed using the H.265 method. Compared with its predecessor (H.264), H.265 can reduce the data stream by half, which translates into proportional disk space savings and extended data retention time. H.265+ can further minimize the streams in typical video surveillance scenarios.
Special recording modes
Footage can be recorded in different modes: continuous, motion detection (with pre- and post-event recording), alarm (with pre- and post-event recording), or continuous recording with special parameters for specific events. Each channel can be configured individually in this respect. It is possible to change the resolution, quality, and frame and bit rates independently of the continuous recording settings. After the occurrence of an event (motion detection, camera tampering, etc), the DVR automatically switches to the event-recording mode (usually with higher parameters). During the rest of the time the recording is carried out in the continuous mode. The increased parameters just before and after the event allow to play back every second with high detail and smoothness, while the recordings between events may have a much lower performance, taking significantly less storage media space.
Enhanced IP mode
The Enhanced IP mode allows to increase the number of supported IP channels. It disables smart events in analog channels and limits the HDMI/VGA output resolution to 1080p. The mode can be activated only through direct access to the DVR's menu.
Sophisticated client software
The iVMS 4200 client software enables users to manage Hikvision devices in IP networks. The software enables the configuration and management of NVRs/DVRs, IP and analog cameras in hybrid systems. The iVMS 4200 utility can remotely manage up to 256 devices on up to 4 monitors. One monitor can display images from up to 64 cameras. Aside from system configuration and live monitoring, the utility can be used for remote playback, notifications, two-way audio transmission, and multi-level e-maps.
Hik-Connect is a mobile application intended for smartphones with the Android and iOS operating systems. It can be used for the remote live viewing of footage from DVRs, NVRs, network cameras via Wi-Fi, 2G, 3G or LTE networks, as well as the playback of recorded video files. The application connects to the devices by IP addresses and/or through the P2P cloud service.
Working in the cloud
Hik-Connect is also the name of a network service intended for Hikvison devices. The service is based on cloud data processing and integrates the following functions:
- Remote cloud access
- DDNS server
Allows to access the device without an external IP address, when simplicity is of the essence. Only the basic network configuration is required. The PC or smartphone application connects with the device via a P2P cloud service.
The DDNS assigns a fixed domain name to dynamically changing IP addresses (Dynamic DNS). This feature is useful when the ISP does not provide users with a fixed IP address. To use the DDNS, you need to have a public IP address and provide access from the external network to the appropriate ports of the NVR (server and http, by default 8000 and 80). The connection is established via a web browser or client application on a PC or smartphone.
Advanced applications for organizing and operating video surveillance systems
This article provides an overview of applications dedicated for installers and users of Hikvision-based video surveillance systems.
SADP (Search Active Device Protocol) is a free, easy-to-use utility designed to search for Hikvision IP cameras and DVRs/NVRs in the local network. The network device search tool can also be used to modify device network parameters, e.g. to change or recover default passwords. Detailed information on the software and its use can be found in the following article: SADP application - LAN tool for organizing CCTV systems based on Hikvision devices.
Specifications
Model | DS-7104HQHI-K1(C)(S) | ||
Product type | Analog HD DVR | ||
Brand | Hikvision | ||
Series | TurboHD 4.0 | ||
Parameters | |||
Analog video inputs | number | 4 | |
Maximum resolution | MP | 2 | |
Signals supported | multi-system (HD-TVI, HD-CVI, AHD, CVBS) | ||
default signal | HD-TVI | ||
IP video inputs | number in standard mode | 1 | |
quantity after switching off analog channels | 5 | ||
number in Enhanced IP mode (4 MP limit) | 2 | ||
Number after switching off analog channels in Enhanced IP mode (4 MP limit) | 6 | ||
Maximum resolution | MP | 6 | |
Operating band | total (input and output) | MBps | 72 |
Input | MBps | 24 (4 in Enhanced IP mode) | |
Recording | Video compression | H.265+/H.265/H.264+/H.264/MPEG4 | |
speed for default signal | kl . /s | 15 for 3 MP (for 1 channel only), 15 for 2 MP, 15 for 720p, 25 for WD1 | |
speed of other HD signals | kl . /s | 15 for 2 MP, 15 for 720p, 25 for WD1/4CIF | |
bitrate of a single video channel | 32 kb/s – 6 MBps | ||
Audio compression | G.711U | ||
audio channel bitrate | 64 Kbps | ||
Max. resolution of video outputs | HDMI 1 | px | 1920 × 1080 |
VGA 1 | px | 1920 × 1080 | |
Video output modes | Parallel HDMI1/VGA1 | ||
Decoding | synchronous playback | 4 | |
HDD | number of SATA II interfaces | 1 | |
max. capacity of each HDD | TB | 6 | |
Image analysis (conventional algorithm) | |||
Basic incidents | Motion detection, Image tampering, Alarm input, Exception, Alarm output | ||
Interfaces | |||
USB | 2.0 | 2 back | |
Two-way audio | Yes | ||
Audio | Input | 1, RCA (2.0 Vp-p, 1 kOhm) | |
Output | 1, RCA (linear, 1 kOhm) | ||
Ethernet | 1 × 1RJ45 10/100 | ||
Others | |||
Applications | Hik-Connect, iVMS-4200 | ||
Archiving | USB, Remote | ||
Network protocols | TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP™, HTTPS, ONVIF | ||
Power supply output | DC | V | 12 |
DC | A | 1.5 | |
Power consumption (without HDD) | DC | W | 8 |
Operating temperature | °C | -10 ...+ 55 | |
Humidity | % | 90 or less (non-condensing) | |
Dimensions (W × D × H) | mm | 200 × 200 × 45 | |
Height | U | 1 | |
Weight | kg | <1 |